手把手教你编译安装MPlayer-1.0pre5

dato

x11应该是xfree86-devel
现在还有个xorg.不知道是不是有个叫xorg-devel

pzf

[root@localhost download]# rpm -ivh mplayer-1.0pre5-2.i386.rpm
warning: mplayer-1.0pre5-2.i386.rpm: V3 DSA signature: NOKEY, key ID 75aa026a
error: Failed dependencies:
        mplayer-common = 2:1.0pre5 is needed by mplayer-1.0pre5-2
[root@localhost download]# rpm -ivh MPlayer-1.0pre5.tar.bz2
MPlayer-1.0pre5.tar.bz2: not an rpm package (or package manifest):
[root@localhost download]# rpm -ivh mplayer-common-1.0pre5-2.i386.rpm
warning: mplayer-common-1.0pre5-2.i386.rpm: V3 DSA signature: NOKEY, key ID 75aa026a
error: Failed dependencies:
        mplayer = 2:1.0pre5 is needed by mplayer-common-1.0pre5-2
[root@localhost download]#

这个是怎么回事。难道rpm安装也有问题

addone

哪里下的？我的直接安就可以了(不过我的是PM打包的)。

最初由 pzf 发表
[root@localhost download]# rpm -ivh mplayer-1.0pre5-2.i386.rpm
warning: mplayer-1.0pre5-2.i386.rpm: V3 DSA signature: NOKEY, key ID 75aa026a
error: Failed dependencies:
        mplayer-common = 2:1.0pre5 is needed by mplayer-1.0pre5-2

提示要先装mplayer-common包。

[root@localhost download]# rpm -ivh MPlayer-1.0pre5.tar.bz2
MPlayer-1.0pre5.tar.bz2: not an rpm package (or package manifest):

……那个确实不是RPM包……

[root@localhost download]# rpm -ivh mplayer-common-1.0pre5-2.i386.rpm
warning: mplayer-common-1.0pre5-2.i386.rpm: V3 DSA signature: NOKEY, key ID 75aa026a
error: Failed dependencies:
        mplayer = 2:1.0pre5 is needed by mplayer-common-1.0pre5-2
[root@localhost download]#

这个是怎么回事。难道rpm安装也有问题

看来是相互引用。那么把这两个包都强制安装就没问题了。

pzf

我是官方下的.你是哪里下的.  
强制安装了.但是不知道装在哪里了.

aaccdd

回答一下上面几位兄弟的问题：


在Mplayer 1.0pre5里面默认是没有gui设置的了，
实际上从7月3日发布的消息里就有这一点，

The MPlayer GUI is optional and not built by default.

因而后继的源码里是没有../etc/gui.conf的，
这里我附上一份供参考。

ʹ??Linux??Ӳ??RTC??ʱ(1024Hz)

请查看locale设置

请问如何加入多个界面

很方便，
参考这里：

5,安装皮肤：
cd ~
tar xjvf neutron-1.5.tar.bz2
mv neutron/ default/
mv default/ /usr/local/share/mplayer/Skin

只需要把下载的包解压，
直接移动到/usr/local/share/mplayer/Skin下即可，
注意使用root

Checking for GUI ... yes

Error: X11 support required for GUI compilation

dato兄说的是，
检查一下是否安装了必要的包,
dpkg -L xfree86
看看全不全
apt-get install 安装一下。

不知道装在哪里了

rpm -ql mplayer
到rpmfind.net找一找就有了
直接使用apt-get安装也很方便

pzf

[root@localhost MPlayer-1.0pre5]# ./configure --enable-gui --with-codecsdir=/usr/lib/codecs --with-win32libdir=/usr/lib/codecs --with-reallibdir=/usr/lib/codecs --with-xanimlibdir=/usr/lib/codecs --disable-inet6 --language=zh_CN
Detected operating system: Linux
Detected host architecture: i386
Checking for cc version ... 3.3.3, ok
Checking for CPU vendor ... AuthenticAMD (6:4:2)
Checking for CPU type ...  AMD Athlon(tm) processor
Checking for GCC & CPU optimization abilities ... Your cc does not even support "i386" for '-march' and '-mcpu'.
error
Checking for kernel support of mmx ... failed
It seems that your kernel does not correctly support mmx.
To use mmx extensions in MPlayer, you have to upgrade/recompile your kernel!
Checking for kernel support of mmx2 ... failed
It seems that your kernel does not correctly support mmx2.
To use mmx2 extensions in MPlayer, you have to upgrade/recompile your kernel!
Checking for kernel support of 3dnow ... failed
It seems that your kernel does not correctly support 3dnow.
To use 3dnow extensions in MPlayer, you have to upgrade/recompile your kernel!
Checking for kernel support of 3dnowex ... failed
It seems that your kernel does not correctly support 3dnowex.
To use 3dnowex extensions in MPlayer, you have to upgrade/recompile your kernel!
Checking for mtrr support ... yes
Checking for assembler (as 2.15.90.0.3) ... ok
Checking for Linux kernel version ... 2.6.5-1.358, ok
Checking for mplayer binary name ... mplayer
Checking for awk ... gawk
Checking for extra headers ... none
Checking for extra libs ... none
Checking for i18n ... no
Checking for setlocale() ... no
Checking for iconv ... no
Checking for langinfo ... no
Checking for language ... using zh_CN (man pages: en)
Checking for enable sighandler ... yes
Checking for runtime cpudetection ... no
Checking for restrict keyword ... none
Checking for kstat ... no
Checking for posix4 ... no
Checking for lrintf ... no
Checking for nanosleep ... no
Checking for socklib ... no
Checking for inet_pton() ... no (=> i'll try inet_aton next)
Checking for inet_aton() ... no (=> network support disabled)
Checking for inttypes.h (required) ... no
Checking for bitypes.h (inttypes.h predecessor) ...
Error: Cannot find header either inttypes.h or bitypes.h (see DOCS/HTML/en/faq.html).

Check "configure.log" if you do not understand why it failed.
[root@localhost MPlayer-1.0pre5]#
这是我的错误. 这些fail和error是由于什么引起的.请大家指教.
我rpm包和这个帖子的方法都试过 .rpm包可以调用命令行模式下的mplayer.gui不可用. 帖子上的方法.进行到这个地方时就不太对了.
请帮助.

chenzq1604

aaccdd兄，如您 上面讲的，那么在/usr/local/share/mplayer/Skin
目录下就只能有一个default目录了，换句话讲只能有一个界面，如果我要另外换一个界面则删除原来的default目录，再解压新的界面/改名/再MV到为default，对不？？

aaccdd

只能有一个default,
但是可以有多个skin,
更换皮肤不用删除默认的皮肤

baiheng222

我按照斑竹先生教的方法安装了mplayer1.05,但是无论打开哪种格式的视频文件，比如.rm,.asf等文件都弹出一个标题为“致命错误”的对话框，提示：“打开/初始化所选的视频输出(-vo)设备是出错！”
请问怎么解决这问题啊