|
|
cat /proc/pci
Multimedia video controller: Brooktree Corporatio Bt878 Video Capture (rev 17).
IRQ 11.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xf7000000 [0xf7000fff].
Bus 2, device 11, function 1:
Multimedia controller: Brooktree Corporatio Bt878 Audio Capture (rev 17).
IRQ 11.
Master Capable. Latency=32. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xf6800000 [0xf6800fff].
dmesg
Linux video capture interface: v1.00
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:0b.0, irq: 11, latency: 32, mmio: 0xf7000000
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
tuner: chip found @ 0xc0
tuner(bttv): type forced to 23 (Philips PAL_DK (FI1256 and compatibles)) [insmod]
registering 0-0060
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info=" AL / mono" radio=no
bttv0: using tuner=33
tuner: type already set (23)
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
在2.6下。。。。conexant fusion 878a芯片
奥迈影视大师 |
|