REDHAT9上ADSL最终解决方案!

lkhlover

在LINUXSIR和LINUXFANS上看了很多关于ADSL的文章,都没有解决我的REDHAT9上ADSL上网的问题,今天实在是没有办法,重新建立连接,曲折的经历,终于上网了(非常激动,可能表达的不是很好),特的写下我的过程,作为参考:

REDHAT默认的PPPOE有问题,需要RPM -E,然后,安装这个
http://www.roaringpenguin.com/pppoe/rp-pppoe-3.5.tar.gz(北南兄推荐)
解压和安装：
#tar zxvf rp-pppoe-3.5.tar.gz
进入解压目录执行
#sh ./go


然后再来设置ADSL。这一处，我们要用命令。

#adsl-setup


Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):如果一张网卡就设置写上eth0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):不用写什么

DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:在这里写上202.96.134.133
下一个DNS是202.96.168.68 //这里根据个人不同可以修改

PASSWORD

>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2

** Summary of what you entered **

Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)?

弄完后，就按一个y键。
(以上为北南兄文章里面内容)
不要急于连接
然后进入网络设置,设置ETH1为固定ip192.168.1.1，停止他(我的是用他),REBOOT -N
然后ADSL-START
PING 你的DNS,如果可以,那么,恭喜你!
其中部分内容可能不同,仅作参考,主要在连接后,能够PING通DNS即可!

lkhlover

看，几乎犯了个大错误！
用SH GOGUI可以编译图形界面！

nickdony

我有一个办法，至少我成功了，我通过一个集线器与ADSL猫相连，在将网络设置为自动获取，根本就不需要设置什么PPPOE就可以上网了

123qq

REDHAT默认的PPPOE没有问题的。 rh8 ,rh9 中我都是用它自带的adsl-stup 来设置

joysuite

不行啊我都试过了，连DNS都PING不到啊只能PING到自己的IP。

brucewang

以前我也和大家一样,装好了ppp,并能激活,但就上不了网.后来翻阅了很多的资料,终于找到了解决的方法.其实真的很简单,把默认的路由改成ppp0,即在终端下已root登陆,输入:
route add default ppp0

就ok了.

tongwd

redhat9的pppoe没有问题，我的问题在网卡，从windows取得网卡参数后填上就解决了。我的网卡用自动设置不行。

hi_lucky

RH9，ADSL拨号上网，能PING通自己的DNS，但PING别的网址时，却PING不通，奇怪的是，PING不通的网址也能上，不知道是什么原因啊？
例如：PING www.linuxsir.cn时，显示：
PING www.linuxsir.cn (211.93.98.22) 56(84) bytes of data.
From 202.107.55.229 icmp_seq=90 Packet filtered
再无反映。

hi_lucky

另外，在检查路由的时候，发现有一lo接口，是169。254。0。0
是否能和上面的问题有关系啊

hi_lucky

我的可以PING通DNS，但PING不通其他的地址，却可以上网，PING不通的可以上网，真奇怪,只是不太稳定，有时上一个网站，要上Ｎ次，不知是何原因。