ATI显卡如何安装闭源驱动啊？

hutaoi

sudo pacman -S catalyst
catalyst 软件包未找到，正在搜索软件包组...
错误：'catalyst'：没有在同步数据库中找到
？？？？？ 难道已经被OOXX了

AUR上的catalyst包也无法安装，安装上了个catalyst-test创建Xorg -configure 时
提示:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH x86_64
Current Operating System: Linux LX-ARCH 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64
Kernel command line: root=/dev/disk/by-uuid/49ac7d95-89e4-4780-9885-fa227151b8c9 ro
Build Date: 16 April 2010  07:19:16PM

Current version of pixman: 0.18.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 17 00:00:43 2010
(II) Loader magic: 0x7c1c20
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9710:1458:d000 ATI Technologies Inc RS880 [Radeon HD 4200] rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
List of video drivers:
        fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.7.1, module version = 8.72.10
        Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.7.1, module version = 8.72.10
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
(**) ChipID override: 0x9710
(**) Chipset Supported AMD Graphics Processor (0x9710) found

Backtrace:
0: Xorg (xorg_backtrace+0x28) [0x45e428]
1: Xorg (0x400000+0x5ad29) [0x45ad29]
2: /lib/libpthread.so.0 (0x7f4476c87000+0xeef0) [0x7f4476c95ef0]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxProbe+0xa1d) [0x7f4474ca542d]
4: Xorg (xf86CallDriverProbe+0x2bd) [0x46c15d]
5: Xorg (DoConfigure+0x19b) [0x472efb]
6: Xorg (InitOutput+0x197) [0x46c437]
7: Xorg (0x400000+0x21f7f) [0x421f7f]
8: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f4475d06b6d]
9: Xorg (0x400000+0x21cc9) [0x421cc9]
Segmentation fault at address (nil)

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support
         at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

----------------------------------------------------------------淫荡的分割线--------------------------------------------------------------------------

Hellp Me!!!!!

hurricanek

闭源驱动过于cao dan，早就不用了。。

开源3d用的很开心

hutaoi

开源驱动只有800FPS／S

开COMPIZ要白屏

我的是HD4200有什么好解决办法么？

多谢了!

zgzzx10

Post by hutaoi;2083348
开源驱动只有800FPS／S

开COMPIZ要白屏

我的是HD4200有什么好解决办法么？

多谢了!

两个开源驱动都不行吗？我的是能顺利开3D的·

hutaoi

Post by zgzzx10;2083394
两个开源驱动都不行吗？我的是能顺利开3D的·

xf86-video-ati 视频mplayer只能输出X11,3D测试800FPS,compiz白屏
xf86video-vesa 问题就更多了,FLASH都很卡!

我的可是AMD X4 955 的神U啊!!!

hutaoi

ATI 太让我失望了!

NVIDIA 闭源驱动非常好装没有这么痛苦 5555555.....

dickeny

老问题了。
如果你执著于使用弊源驱动，那么可以安装UBUNTU，因为catalyst就是Ubuntu的御用驱动，肯定能用上的；
或者使用xf86-video-ati，至少我的Radeon HD 2400跑得很好，开了KDE4的特效也还有500fps。mplayer只能输出x11之类的我也不管了，忍吧

hutaoi

Post by dickeny;2083435
老问题了。
如果你执著于使用弊源驱动，那么可以安装UBUNTU，因为catalyst就是Ubuntu的御用驱动，肯定能用上的；
或者使用xf86-video-ati，至少我的Radeon HD 2400跑得很好，开了KDE4的特效也还有500fps。mplayer只能输出x11之类的我也不管了，忍吧

看来我得加个NVIDIA显卡了。。。。。。

blance

这个问题很久以前也困惑了我很久，后来的经验告诉你，xorg-server不要追求最新，
depends=('xorg-server<1.7.0' 'kernel26>=2.6.29' 'kernel26<2.6.35' 'kernel26-headers' 'netkit-bsd-finger' 'libstdc++5' 'libxrandr' 'libsm' 'fontconfig' 'libxcursor' 'libxi' 'gcc-libs' 'openssl-compatibility')

aur上面的pkg把依赖描述得很明白了 先确保你的依赖的包是否符合再装~

blance

http://aur.archlinux.org/packages.php?ID=29111
这是aur链接，根据要求去做，看里面的回复不至于不能装的~