终端老是黑屏键鼠无响应

hlh59 · 发表于 2010-4-11 23:38:04

kde界面系统开启终端一会就会无缘无故黑屏，然后键鼠都没有反应

在安装编译软件包过程中也总是这样，让人很无奈，大大们帮忙看看~

jsun · 发表于 2010-4-13 03:15:01

你超频了？给出硬件配置和xorg.0.log看看

hlh59 · 发表于 2010-4-13 09:57:32

dmesg.log信息：

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-gentoo-r7 (root@livecd) (gcc version 4.3.4 (Gentoo 4.3.4 p1.1, pie-10.1.5) ) #1 SMP Sat Apr 10 10:02:36 CST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000]  BIOS-e820: 0000000000100000 - 000000001fe74000 (usable)
[ 0.000000]  BIOS-e820: 000000001fe74000 - 000000001fe76000 (ACPI NVS)
[ 0.000000]  BIOS-e820: 000000001fe76000 - 000000001fe97000 (ACPI data)
[ 0.000000]  BIOS-e820: 000000001fe97000 - 000000001ff00000 (reserved)
[ 0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1fe74 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000]  modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000]  modified: 0000000000100000 - 000000001fe74000 (usable)
[ 0.000000]  modified: 000000001fe74000 - 000000001fe76000 (ACPI NVS)
[ 0.000000]  modified: 000000001fe76000 - 000000001fe97000 (ACPI data)
[ 0.000000]  modified: 000000001fe97000 - 000000001ff00000 (reserved)
[ 0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000]  modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000]  modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fe74000
[ 0.000000]  0000000000 - 0000400000 page 4k
[ 0.000000]  0000400000 - 001fc00000 page 2M
[ 0.000000]  001fc00000 - 001fe74000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fe74000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000feb80 00014 (v00 DELL  )
[ 0.000000] ACPI: RSDT 000fd22a 00034 (v01 DELL 2400 00000007 ASL  00000061)
[ 0.000000] ACPI: FACP 000fd25e 00074 (v01 DELL 2400 00000007 ASL  00000061)
[ 0.000000] ACPI: DSDT fffcc0f1 02404 (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1fe74000 00040
[ 0.000000] ACPI: SSDT fffce4f5 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fd2d2 0006C (v01 DELL 2400 00000007 ASL  00000061)
[ 0.000000] ACPI: BOOT 000fd33e 00028 (v01 DELL 2400 00000007 ASL  00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fe74000
[ 0.000000] low ram: 0 - 1fe74000
[ 0.000000] node 0 low ram: 00000000 - 1fe74000
[ 0.000000] node 0 bootmap 00008000 - 0000bfd0
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 001fe74000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000]    TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001913fcc] TEXT DATA BSS ==> [0001000000 - 0001913fcc]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001914000 - 000191b1c4]             BRK ==> [0001914000 - 000191b1c4]
[ 0.000000] #6 [0000007000 - 0000008000]       PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000c000]       BOOTMAP ==> [0000008000 - 000000c000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA    0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fe74
[ 0.000000] HighMem  0x0001fe74 -> 0x0001fe74
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000]    0: 0x00000000 -> 0x00000002
[ 0.000000]    0: 0x00000006 -> 0x000000a0
[ 0.000000]    0: 0x00000100 -> 0x0001fe74
[ 0.000000] On node 0 totalpages: 130576
[ 0.000000] free_area_init_node: node 0, pgdat c17bf000, node_mem_map c191d000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3964 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125591 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34712 r0 d22632 u1048576
[ 0.000000] pcpu-alloc: s34712 r0 d22632 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129555
[ 0.000000] Kernel command line: root=/dev/hda3
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 507724k/522704k available (5050k kernel code, 14100k reserved, 2948k data, 488k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000]    fixmap  : 0xfff1f000 - 0xfffff000 ( 896 kB)
[ 0.000000]    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000]    vmalloc : 0xe0674000 - 0xff7fe000 ( 497 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xdfe74000 ( 510 MB)
[ 0.000000]    .init : 0xc17d0000 - 0xc184a000 ( 488 kB)
[ 0.000000]    .data : 0xc14eebf2 - 0xc17cff94 (2948 kB)
[ 0.000000]    .text : 0xc1000000 - 0xc14eebf2 (5050 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2790.971 MHz processor.
[ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.94 BogoMIPS (lpj=2790971)
[ 0.002167] Security Framework initialized
[ 0.002241] SELinux:  Initializing.
[ 0.002319] SELinux:  Starting in permissive mode
[ 0.002328] Mount-cache hash table entries: 512
[ 0.002577] Initializing cgroup subsys ns
[ 0.002652] Initializing cgroup subsys cpuacct
[ 0.002727] Initializing cgroup subsys freezer
[ 0.003022] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.003126] CPU: L2 cache: 512K
[ 0.003195] CPU: Hyper-Threading is disabled
[ 0.003268] mce: CPU supports 4 MCE banks
[ 0.003347] CPU0: Thermal monitoring enabled (TM1)
[ 0.003431] Performance Events: no PMU driver, software events only.
[ 0.003540] Checking 'hlt' instruction... OK.
[ 0.007798] SMP alternatives: switching to UP code
[ 0.015243] ACPI: Core revision 20090903
[ 0.050882] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060962] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 0.061990] Brought up 1 CPUs
[ 0.061990] Total of 1 processors activated (5581.94 BogoMIPS).
[ 0.061990] khelper used greatest stack depth: 7244 bytes left
[ 0.062243] Time: 12:41:30  Date: 04/12/10
[ 0.062386] NET: Registered protocol family 16
[ 0.063103] EISA bus registered
[ 0.063195] ACPI: bus type pci registered
[ 0.063548] PCI: PCI BIOS revision 2.10 entry at 0xfbbbf, last bus=1
[ 0.063624] PCI: Using configuration type 1 for base access
[ 0.064032] khelper used greatest stack depth: 7184 bytes left
[ 0.077394] bio: create slab <bio-0> at 0
[ 0.078146] ACPI: EC: Look up EC in DSDT
[ 0.101814] ACPI: Interpreter enabled
[ 0.102000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.102249] ACPI: Using IOAPIC for interrupt routing
[ 0.136542] ACPI: No dock devices found.
[ 0.138057] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.138230] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.138306] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.138313] pci 0000:00:02.0: reg 14 32bit mmio: [0xfeb80000-0xfebfffff]
[ 0.138418] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.138472] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.138528] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.138591] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.138648] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.138725] pci 0000:00:1d.7: PME# disabled
[ 0.138846] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.138847] * this clock source is slow. If you are sure your timer does not have
[ 0.138849] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.139044] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.139155] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.139251] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.139259] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.139267] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.139274] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.139282] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.139290] pci 0000:00:1f.1: reg 24 32bit mmio: [0xfeb7fc00-0xfeb7ffff]
[ 0.139342] pci 0000:00:1f.3: reg 20 io port: [0xeda0-0xedbf]
[ 0.139390] pci 0000:00:1f.5: reg 10 io port: [0xee00-0xeeff]
[ 0.139397] pci 0000:00:1f.5: reg 14 io port: [0xedc0-0xedff]
[ 0.139405] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfeb7fa00-0xfeb7fbff]
[ 0.139412] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfeb7f900-0xfeb7f9ff]
[ 0.139442] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.139517] pci 0000:00:1f.5: PME# disabled
[ 0.139635] pci 0000:01:09.0: reg 10 32bit mmio: [0xfe9fe000-0xfe9fffff]
[ 0.139663] pci 0000:01:09.0: reg 30 32bit mmio pref: [0xfea00000-0xfea03fff]
[ 0.139681] pci 0000:01:09.0: supports D1 D2
[ 0.139684] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.139759] pci 0000:01:09.0: PME# disabled
[ 0.140010] pci 0000:00:1e.0: transparent bridge
[ 0.140086] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
[ 0.140098] pci_bus 0000:00: on NUMA node 0
[ 0.140104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.285285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.286055] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.286800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.287541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.288269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.289163] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.290009] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.290850] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.291523] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.291968] vgaarb: loaded
[ 0.292303] SCSI subsystem initialized
[ 0.292441] libata version 3.00 loaded.
[ 0.293292] usbcore: registered new interface driver usbfs
[ 0.293433] usbcore: registered new interface driver hub
[ 0.293585] usbcore: registered new device driver usb
[ 0.294132] PCI: Using ACPI for IRQ routing
[ 0.294623] cfg80211: Using static regulatory domain info
[ 0.294698] cfg80211: Regulatory domain: US
[ 0.294767] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.294876] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.295008] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.295083] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.295157] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.295232] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.295306] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.295386] cfg80211: Calling CRDA for country: US
[ 0.295509] NetLabel: Initializing
[ 0.295578] NetLabel:  domain hash size = 128
[ 0.295649] NetLabel:  protocols = UNLABELED CIPSOv4
[ 0.295734] NetLabel:  unlabeled traffic allowed by default
[ 0.295928] Switching to clocksource tsc
[ 0.298655] pnp: PnP ACPI init
[ 0.298740] ACPI: bus type pnp registered
[ 0.320719] pnp 00:0b: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.320841] pnp 00:0b: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.321691] pnp: PnP ACPI: found 12 devices
[ 0.321763] ACPI: ACPI bus type pnp unregistered
[ 0.321869] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.321944] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.322020] system 00:00: iomem range 0x1000000-0x1fe73fff could not be reserved
[ 0.322128] system 00:00: iomem range 0xc0000-0xfffff could not be reserved
[ 0.322203] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.322313] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.322388] system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved
[ 0.322467] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.322542] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.322625] system 00:0b: ioport range 0xc00-0xc7f has been reserved
[ 0.357845] pci 0000:01:09.0: BAR 6: address space collision on of device [0xfea00000-0xfea03fff]
[ 0.357972] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.358045] pci 0000:00:1e.0: IO window: disabled
[ 0.358121] pci 0000:00:1e.0: MEM window: 0xfe900000-0xfeafffff
[ 0.358196] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x200fffff
[ 0.358284] pci 0000:00:1e.0: setting latency timer to 64
[ 0.358290] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[ 0.358293] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.358297] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
[ 0.358301] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff]
[ 0.358304] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[ 0.358308] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.358352] NET: Registered protocol family 2
[ 0.358558] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.358981] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.359199] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.359373] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.359448] TCP reno registered
[ 0.359637] NET: Registered protocol family 1
[ 0.359910] RPC: Registered udp transport module.
[ 0.359983] RPC: Registered tcp transport module.
[ 0.360054] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.360142] pci 0000:00:02.0: Boot video device
[ 0.360150] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x001b
[ 0.360152] pci 0000:00:1d.0: Performing full reset
[ 0.360169] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.360172] pci 0000:00:1d.1: Performing full reset
[ 0.360187] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.360189] pci 0000:00:1d.2: Performing full reset
[ 0.360473] Simple Boot Flag at 0x7a set to 0x80
[ 0.361313] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17
[ 0.361461] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.361570] Scanning for low memory corruption every 60 seconds
[ 0.362154] audit: initializing netlink socket (disabled)
[ 0.362246] type=2000 audit(1271076090.361:1): initialized
[ 0.371993] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.376003] VFS: Disk quotas dquot_6.5.2
[ 0.376195] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.377559] msgmni has been set to 992
[ 0.377801] SELinux:  Registering netfilter hooks
[ 0.378112] cryptomgr_test used greatest stack depth: 6932 bytes left
[ 0.378244] cryptomgr_test used greatest stack depth: 6392 bytes left
[ 0.379922] alg: No test for stdrng (krng)
[ 0.380245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.380356] io scheduler noop registered
[ 0.380426] io scheduler anticipatory registered
[ 0.380497] io scheduler deadline registered
[ 0.380664] io scheduler cfq registered (default)
[ 0.381006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.386100] Non-volatile memory driver v1.3
[ 0.386266] intel_rng: FWH not detected
[ 0.386367] Linux agpgart interface v0.103
[ 0.386535] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 0.386906] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[ 0.388979] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.389427] uvesafb: failed to execute /sbin/v86d
[ 0.389499] uvesafb: make sure that the v86d helper is installed and executable
[ 0.389608] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 0.389681] uvesafb: vbe_init() failed with -22
[ 0.389757] uvesafb: probe of uvesafb.0 failed with error -22
[ 0.390171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.390293] ACPI: Power Button [VBTN]
[ 0.390495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.390607] ACPI: Power Button [PWRF]
[ 0.391042] processor LNXCPU:00: registered as cooling_device0
[ 0.414021] [drm] Initialized drm 1.1.0 20060810
[ 0.414120] alloc irq_desc for 16 on node -1
[ 0.414124] alloc kstat_irqs on node -1
[ 0.414134] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.414212] pci 0000:00:02.0: setting latency timer to 64
[ 0.420233] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.420348] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.663811] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.664507] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.667588] brd: module loaded
[ 0.669041] loop: module loaded
[ 0.669239] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.669381] Uniform Multi-Platform E-IDE driver
[ 0.669609] piix 0000:00:1f.1: IDE controller (0x8086:0x24cb rev 0x01)
[ 0.669697] alloc irq_desc for 18 on node -1
[ 0.669699] alloc kstat_irqs on node -1
[ 0.669711] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.669872] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.669951]    ide0: BM-DMA at 0xffa0-0xffa7
[ 0.670031]    ide1: BM-DMA at 0xffa8-0xffaf
[ 0.670109] Probing IDE interface ide0...
[ 0.933800] hda: ST3120022A, ATA DISK drive
[ 1.546102] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.546541] hda: UDMA/100 mode selected
[ 1.546853] Probing IDE interface ide1...
[ 2.218161] hdc: JLMS DVD-ROM XJ-HD166, ATAPI CD/DVD-ROM drive
[ 2.524069] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.524120] hdc: UDMA/33 mode selected
[ 2.524283] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.524431] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.524836] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.524950] ide-gd driver 1.18
[ 2.525057] hda: max request size: 512KiB
[ 2.534375] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63
[ 2.534675] hda: cache flushes supported
[ 2.534801]  hda: hda1 hda2 hda3
[ 2.545181] ide-cd driver 5.00
[ 2.545549] ide-cd: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 2.545744] Uniform CD-ROM driver Revision: 3.20
[ 2.550235] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 2.550313] Copyright (c) 1999-2006 Intel Corporation.
[ 2.550450] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.550523] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.550722] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.550795] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.551101] sky2 driver version 1.25
[ 2.551264] alloc irq_desc for 17 on node -1
[ 2.551267] alloc kstat_irqs on node -1
[ 2.551277] b44 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.578134] ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0
[ 2.578272] b44.c:v2.0
[ 2.586411] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:1f:47:d5:6a
[ 2.586601] PPP generic driver version 2.4.2
[ 2.586948] console [netcon0] enabled
[ 2.587032] netconsole: network logging started
[ 2.587655] video1394: Installed video1394 module
[ 2.587809] ieee1394: raw1394: /dev/raw1394 device initialized
[ 2.588381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.588458] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 2.588493] alloc irq_desc for 23 on node -1
[ 2.588496] alloc kstat_irqs on node -1
[ 2.588506] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.588597] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.588602] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.588698] drivers/usb/core/inode.c: creating file 'devices'
[ 2.588703] drivers/usb/core/inode.c: creating file '001'
[ 2.588803] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.588921] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 2.588926] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 2.588965] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.589095] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.592983] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.592986] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 2.593042] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
[ 2.593118] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.597010] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.603009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.603125] usb usb1: default language 0x0409
[ 2.603134] usb usb1: udev 1, busnum 1, minor = 0
[ 2.603137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.603212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.603320] usb usb1: Product: EHCI Host Controller
[ 2.603392] usb usb1: Manufacturer: Linux 2.6.32-gentoo-r7 ehci_hcd
[ 2.603465] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.603586] usb usb1: uevent
[ 2.603658] usb usb1: usb_probe_device
[ 2.603663] usb usb1: configuration #1 chosen from 1 choice
[ 2.603743] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.603760] usb 1-0:1.0: uevent
[ 2.603816] hub 1-0:1.0: usb_probe_interface
[ 2.603820] hub 1-0:1.0: usb_probe_interface - got id
[ 2.603823] hub 1-0:1.0: USB hub found
[ 2.603903] hub 1-0:1.0: 6 ports detected
[ 2.603974] hub 1-0:1.0: standalone hub
[ 2.603976] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.603978] hub 1-0:1.0: individual port over-current protection
[ 2.603981] hub 1-0:1.0: power on to power good time: 20ms
[ 2.603986] hub 1-0:1.0: local power source is good
[ 2.603990] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.604038] drivers/usb/core/inode.c: creating file '001'
[ 2.604142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.604216] ohci_hcd: block sizes: ed 64 td 64
[ 2.604298] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.604430] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.604513] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.604518] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.604595] drivers/usb/core/inode.c: creating file '002'
[ 2.604695] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.604810] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.604885] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.604887] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.604900] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.604919] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 2.605056] usb usb2: default language 0x0409
[ 2.605066] usb usb2: udev 1, busnum 2, minor = 128
[ 2.605069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.605144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.605252] usb usb2: Product: UHCI Host Controller
[ 2.605323] usb usb2: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 2.605396] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.606283] usb usb2: uevent
[ 2.606350] usb usb2: usb_probe_device
[ 2.606354] usb usb2: configuration #1 chosen from 1 choice
[ 2.606432] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.606453] usb 2-0:1.0: uevent
[ 2.606508] hub 2-0:1.0: usb_probe_interface
[ 2.606511] hub 2-0:1.0: usb_probe_interface - got id
[ 2.606514] hub 2-0:1.0: USB hub found
[ 2.606596] hub 2-0:1.0: 2 ports detected
[ 2.606668] hub 2-0:1.0: standalone hub
[ 2.606670] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.606672] hub 2-0:1.0: individual port over-current protection
[ 2.606675] hub 2-0:1.0: power on to power good time: 2ms
[ 2.606680] hub 2-0:1.0: local power source is good
[ 2.606683] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.606704] drivers/usb/core/inode.c: creating file '001'
[ 2.606746] alloc irq_desc for 19 on node -1
[ 2.606749] alloc kstat_irqs on node -1
[ 2.606757] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.606838] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.606842] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.606918] drivers/usb/core/inode.c: creating file '003'
[ 2.607044] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.607158] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.607231] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.607234] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.607247] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 2.607262] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 2.607379] usb usb3: default language 0x0409
[ 2.607388] usb usb3: udev 1, busnum 3, minor = 256
[ 2.607391] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.607465] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.607571] usb usb3: Product: UHCI Host Controller
[ 2.607642] usb usb3: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 2.607714] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.607834] usb usb3: uevent
[ 2.607896] usb usb3: usb_probe_device
[ 2.607900] usb usb3: configuration #1 chosen from 1 choice
[ 2.607977] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.607994] usb 3-0:1.0: uevent
[ 2.608069] hub 3-0:1.0: usb_probe_interface
[ 2.608073] hub 3-0:1.0: usb_probe_interface - got id
[ 2.608075] hub 3-0:1.0: USB hub found
[ 2.608156] hub 3-0:1.0: 2 ports detected
[ 2.608226] hub 3-0:1.0: standalone hub
[ 2.608228] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.608230] hub 3-0:1.0: individual port over-current protection
[ 2.608233] hub 3-0:1.0: power on to power good time: 2ms
[ 2.608238] hub 3-0:1.0: local power source is good
[ 2.608241] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.608260] drivers/usb/core/inode.c: creating file '001'
[ 2.608300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.608381] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.608385] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.608461] drivers/usb/core/inode.c: creating file '004'
[ 2.608550] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.608662] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.608736] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.608738] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.608750] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 2.608767] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 2.608880] usb usb4: default language 0x0409
[ 2.608889] usb usb4: udev 1, busnum 4, minor = 384
[ 2.608892] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.608967] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.609096] usb usb4: Product: UHCI Host Controller
[ 2.609168] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[ 2.609241] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.609362] usb usb4: uevent
[ 2.609427] usb usb4: usb_probe_device
[ 2.609431] usb usb4: configuration #1 chosen from 1 choice
[ 2.609509] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.609526] usb 4-0:1.0: uevent
[ 2.609581] hub 4-0:1.0: usb_probe_interface
[ 2.609584] hub 4-0:1.0: usb_probe_interface - got id
[ 2.609587] hub 4-0:1.0: USB hub found
[ 2.609667] hub 4-0:1.0: 2 ports detected
[ 2.609738] hub 4-0:1.0: standalone hub
[ 2.609740] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.609742] hub 4-0:1.0: individual port over-current protection
[ 2.609745] hub 4-0:1.0: power on to power good time: 2ms
[ 2.609750] hub 4-0:1.0: local power source is good
[ 2.609753] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.609772] drivers/usb/core/inode.c: creating file '001'
[ 2.609941] usbcore: registered new interface driver usblp
[ 2.610037] Initializing USB Mass Storage driver...
[ 2.610189] usbcore: registered new interface driver usb-storage
[ 2.610263] USB Mass Storage support registered.
[ 2.610405] usbcore: registered new interface driver libusual
[ 2.610630] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.613827] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.613906] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.614318] mice: PS/2 mouse device common for all mice
[ 2.614815] rtc_cmos 00:05: RTC can wake from S4
[ 2.614985] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.615100] rtc0: alarms up to one day, 242 bytes nvram
[ 2.615267] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.615871] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.616270] EISA: Probing bus 0 at eisa.0
[ 2.616377] EISA: Detected 0 cards.
[ 2.616517] cpuidle: using governor ladder
[ 2.616589] cpuidle: using governor menu
[ 2.618578] usbcore: registered new interface driver hiddev
[ 2.618717] usbcore: registered new interface driver usbhid
[ 2.618791] usbhid: v2.6:USB HID core driver
[ 2.619225] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 2.619783] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.619928] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 2.635413] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.704056] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
[ 2.704061] hub 1-0:1.0: port 6: status 0501 change 0001
[ 2.706022] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.708017] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.709016] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00
[ 2.804060] hub 1-0:1.0: state 7 ports 6 chg 0040 evt 0000
[ 2.804067] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 2.855216] ehci_hcd 0000:00:1d.7: port 6 high speed
[ 2.855222] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 2.906016] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 2.931012] intel8x0_measure_ac97_clock: measured 50953 usecs (2456 samples)
[ 2.931087] intel8x0: clocking to 48000
[ 2.932626] ALSA device list:
[ 2.932701] #0: Intel 82801DB-ICH4 with AD1981B at irq 17
[ 2.932875] Netfilter messages via NETLINK v0.30.
[ 2.932990] nf_conntrack version 0.5.0 (7940 buckets, 31760 max)
[ 2.933424] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 2.933535] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 2.933644] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 2.934073] ctnetlink v0.93: registering with nfnetlink.
[ 2.934163] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.934237] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.934349] xt_time: kernel timezone is -0000
[ 2.935414] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.935530] ClusterIP Version 0.8 loaded successfully
[ 2.935621] arp_tables: (C) 2002 David S. Miller
[ 2.935728] TCP cubic registered
[ 2.935798] Initializing XFRM netlink socket
[ 2.936264] NET: Registered protocol family 10
[ 2.937976] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.938348] IPv6 over IPv4 tunneling driver
[ 2.939439] NET: Registered protocol family 17
[ 2.939614] Bridge firewalling registered
[ 2.939701] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 2.939775] All bugs added by David S. Miller <davem@redhat.com>
[ 2.939899] Using IPI No-Shortcut mode
[ 2.940263] PM: Resume from disk failed.
[ 2.940285] registered taskstats version 1
[ 2.940563] Magic number: 6:293:683
[ 2.957316] ehci_hcd 0000:00:1d.7: port 6 high speed
[ 2.957323] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
[ 3.021308] usb 1-6: default language 0x0409
[ 3.023183] usb 1-6: udev 2, busnum 1, minor = 1
[ 3.023187] usb 1-6: New USB device found, idVendor=0930, idProduct=6544
[ 3.023263] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.023344] usb 1-6: Product: DataTraveler 120
[ 3.023415] usb 1-6: Manufacturer: Kingston
[ 3.023486] usb 1-6: SerialNumber: 0014780F9A4EC9214541008D
[ 3.023632] usb 1-6: uevent
[ 3.023754] usb 1-6: usb_probe_device
[ 3.023760] usb 1-6: configuration #1 chosen from 1 choice
[ 3.023936] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 3.023956] usb 1-6:1.0: uevent
[ 3.024021] usb-storage 1-6:1.0: usb_probe_interface
[ 3.024029] usb-storage 1-6:1.0: usb_probe_interface - got id
[ 3.024099] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.024423] drivers/usb/core/inode.c: creating file '002'
[ 3.024450] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.024458] usb-storage: device found at 2
[ 3.024460] usb-storage: waiting for device to settle before scanning
[ 3.054279] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.057842] md: Waiting for all devices to be available before autodetect
[ 3.057918] md: If you don't use raid, use raid=noautodetect
[ 3.058243] md: Autodetecting RAID arrays.
[ 3.058316] md: Scanned 0 and added 0 devices.
[ 3.058387] md: autorun ...
[ 3.058455] md: ... autorun DONE.
[ 3.070800] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.070877] EXT3-fs: write access will be enabled during recovery.
[ 3.704017] usb usb2: suspend_rh (auto-stop)
[ 3.704037] usb usb3: suspend_rh (auto-stop)
[ 3.954009] usb usb4: suspend_rh (auto-stop)
[ 4.094751] kjournald starting.  Commit interval 5 seconds
[ 4.094847] EXT3-fs: recovery complete.
[ 4.095272] EXT3-fs: mounted filesystem with writeback data mode.
[ 4.095368] VFS: Mounted root (ext3 filesystem) readonly on device 3:3.
[ 4.095464] Freeing unused kernel memory: 488k freed
[ 4.096194] Write protecting the kernel text: 5052k
[ 4.096296] Write protecting the kernel read-only data: 2396k
[ 4.913054] stty used greatest stack depth: 6288 bytes left
[ 5.347969] gawk used greatest stack depth: 6156 bytes left
[ 5.704026] hub 2-0:1.0: hub_suspend
[ 5.704038] usb usb2: bus auto-suspend
[ 5.704042] usb usb2: suspend_rh
[ 5.704058] hub 3-0:1.0: hub_suspend
[ 5.704062] usb usb3: bus auto-suspend
[ 5.704065] usb usb3: suspend_rh
[ 5.704079] hub 4-0:1.0: hub_suspend
[ 5.704083] usb usb4: bus auto-suspend
[ 5.704085] usb usb4: suspend_rh
[ 5.970711] udev: starting version 149
[ 5.984417] usb usb2: uevent
[ 5.984548] usb 2-0:1.0: uevent
[ 5.984941] usb usb3: uevent
[ 5.985111] usb 3-0:1.0: uevent
[ 5.985494] usb usb4: uevent
[ 5.985664] usb 4-0:1.0: uevent
[ 5.986083] usb usb1: uevent
[ 5.986239] usb 1-0:1.0: uevent
[ 5.986316] usb 1-6: uevent
[ 5.986389] usb 1-6:1.0: uevent
[ 6.034250] usb usb2: uevent
[ 6.036404] usb usb3: uevent
[ 6.038450] usb usb1: uevent
[ 6.040542] usb usb4: uevent
[ 6.063805] cdrom_id used greatest stack depth: 6036 bytes left
[ 6.077818] usb 1-6: uevent
[ 6.608169] udevd used greatest stack depth: 6016 bytes left
[ 7.032502] EXT3 FS on hda3, internal journal
[ 8.024652] scsi 0:0:0:0: Direct-Access    Kingston DataTraveler 120 1.00 PQ: 0 ANSI: 2
[ 8.024859] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.025721] usb-storage: device scan complete
[ 8.027567] sd 0:0:0:0: [sda] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 8.028138] sd 0:0:0:0: [sda] Write Protect is off
[ 8.028143] sd 0:0:0:0: [sda] Mode Sense: 65 44 09 30
[ 8.028146] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.030396] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.030403]  sda: sda1
[ 8.033041] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.033047] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.035244] usb 1-6:1.0: uevent
[ 8.035424] usb 1-6: uevent
[ 8.038970] usb 1-6:1.0: uevent
[ 8.197270] Adding 1060280k swap on /dev/hda2.  Priority:-1 extents:1 across:1060280k
[ 11.722834] dumpkeys used greatest stack depth: 5944 bytes left
[ 16.363994] usb usb2: uevent
[ 16.364403] usb 2-0:1.0: uevent
[ 16.364624] usb usb3: uevent
[ 16.364744] usb 3-0:1.0: uevent
[ 16.364951] usb usb4: uevent
[ 16.365371] usb 4-0:1.0: uevent
[ 16.365624] usb usb1: uevent
[ 16.365742] usb 1-0:1.0: uevent
[ 16.365820] usb 1-6: uevent
[ 16.365940] usb 1-6:1.0: uevent
[ 17.586372] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.704161] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 20.704165] b44: eth0: Flow control is off for TX and off for RX.
[ 20.704257] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.286011] eth0: no IPv6 routers present
[ 93.912343] knotify4 used greatest stack depth: 5572 bytes left

hlh59 · 发表于 2010-4-13 09:58:28

Xorg.0.log信息：

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-gentoo-r7 i686
Current Operating System: Linux hlh 2.6.32-gentoo-r7 #2 SMP Mon Apr 12 23:52:11 CST 2010 i686
Kernel command line: root=/dev/hda3
Build Date: 11 April 2010 10:23:02AM

Current version of pixman: 0.17.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 13 09:50:35 2010
(II) Loader magic: 0x81e68e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2562:1028:0160 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 1, Mem @ 0xe8000000/134217728, 0xfeb80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xFEB80000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers/ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers/tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers/ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A

DC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A

DC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "VSC", prod id 27424
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): EDID vendor "VSC", prod id 27424
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (490, 290) mm
(**) intel(0): DPI set to (87, 91)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 108800 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 435196 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->

IOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)       solid
(II)       copy
(II)       composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x000df000:          end of stolen memory
(II) intel(0): 0x000df000-0x07ffefff: DRI memory manager (130176 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000001f3fc000 physical
)
(II) intel(0): 0x08000000:          end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x000df000:          start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x00100000-0x00104fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000:          end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "

ower Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "

ower Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A

DC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A

DC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "VSC", prod id 27424
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): EDID vendor "VSC", prod id 27424

请帮忙看一下~  emerge时候比较容易死机，一般界面操作没有什么问题

leisudong · 发表于 2010-4-13 11:35:39

emerge容易死机，我觉得你更应该检查CPU风扇，还有memtest。

hlh59 · 发表于 2010-4-13 13:01:36

切换到文本模式下 emerge正常完成没有任何错误~
是不是真是显示分辨率问题呢？

hlh59 · 发表于 2010-4-13 14:51:17

再补充总结下：
进入kde界面，如果不启动konsole，没有问题~ 但启动konsole后有时立马死机（这个情况比较少），更多时候是emerge过程中显示器黑屏显示无连接，键鼠无法操作，电脑电源正常

但切换到文本模式下（Alt + Ctrl + F1）再emerge，系统能够顺利完成编译，没有任何错误。

请各位再帮忙看看 3 4楼有xorg.0.log和dmesg

		自动登录	找回密码
密码			注册

终端老是黑屏 键鼠无响应

终端老是黑屏键鼠无响应