请教在F10下NVIDIA GF9300m GS显卡驱动安装问题

jevinlin

安装了NVIDIA-Linux-x86-173.08-pkg1.run显卡驱动，安装完无法进入Xwindow

安装命令：sh NVIDIA-Linux-x86-180.06-pkg1.run

安装无报错，安装完后startx,出现如下报错：
NVIDIA:could not open the device file /dev/nvidia0 (Input/output error)
(EE)NVIDIA(0):Failed to initialize the NVIDIA graphics device PCI:1:0:0
(EE)NVIDIA(0)：Please see the COMMOM PROBLEMS section in the README for additional information
(EE)NVIDIA(0):Failed to initialize the NVIDIA graphics device!
(EE)Screen(s) found, but none have a usable configuration

Fatal server eeor:
no screens found

是什么原因，如何解决,非常感谢！！！

kpjack

su
rpm -Uvh http://ftp-stud.hs-esslingen.de/ ... e-stable.noarch.rpm http://ftp-stud.hs-esslingen.de/ ... e-stable.noarch.rpm

yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i386 xorg-x11-drv-nvidia-libs.x86_64

reboot

jevinlin

Post by kpjack;1923881
su
rpm -Uvh http://ftp-stud.hs-esslingen.de/ ... e-stable.noarch.rpm http://ftp-stud.hs-esslingen.de/ ... e-stable.noarch.rpm

yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i386 xorg-x11-drv-nvidia-libs.x86_64

reboot

还是有那个问题？　这是什么原因呢？这个是log
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0):     Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0):     additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

kpjack

你先把原来安装的驱动删除，然后再安装

jevinlin

Post by kpjack;1924060
你先把原来安装的驱动删除，然后再安装

还是一样的错误，　我用的是sony的vgn-z540