［求助］FC9下如何使用自带的软件驱动Histon Anylink UA-10进行USB CMDA无线上网。

wayaonline

我使用的HP Compaq nc4400 笔记本，和Histon Anylink UA-10 的CDMA USB无线上网卡。
系统是刚装的FC9。GNOME桌面环境。

本来想要自己解决的。捣鼓了半天按照LINUXSIR里的帖子安装了WVDIAL，并且拨号成功了。但是去无法浏览网页，聊QQ。帖子有说是路由问题的。按其指示的步骤作了以下还是不成功（命令：route add default ppp0）。

自己的步骤：

yum install wvdial   //步骤1
gedit /etc/wvdial.conf  //步骤2
##################
/etc/wvdial.conf内容
##################
[Dialer Defaults]
Modem=/dev/ttyUSB0
Baud=230400
Init=ATZ
Init2=AT S0=0
Phone=#777
Username=CARD
Password=CARD

[Modem0]
Modem=/dev/ttyUSB0
Baud=115200
SetVolume=0
Dial Command = ATDT
init1=ATZ
FlowControl= Hardware (CRTSCTS)

[Dialer cdma]
Username=CARD
Password=CARD
Phone=#777
Stupid Mode= 1
Inherits = Modem0
#############################

wvdial 或者 wvdial cdma           //步骤3.两种方式都成功链接。


FireFox 3 上网 http://www.linuxsir.cn   //步骤4.不成功

route add default ppp0    //步骤5.成功 SIOCADDRT: 文件已存在

FireFox 3 上网 http://www.linuxsir.cn   //步骤6.不成功

ping 61.139.2.69 或者 www.linuxsir.cn   //步骤7 不成功。

blae

看看日志/var/log/message，确定拨号成功；
route -n看看默认路由

CDMA上网需要注意你的SIM卡开通的上网方式：CMWAP还是CMNAT
CMWAP只能上联通的局域网

wayaonline

messages信息：

May 19 14:09:36 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 7
May 19 14:09:36 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice
May 19 14:09:36 localhost kernel: pl2303 3-2:1.0: pl2303 converter detected
May 19 14:09:36 localhost kernel: usb 3-2: pl2303 converter now attached to ttyUSB0
May 19 14:09:36 localhost kernel: usb 3-2: New USB device found, idVendor=067b, idProduct=2303
May 19 14:09:36 localhost kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 19 14:09:36 localhost kernel: usb 3-2: Product: USB-Serial Controller
May 19 14:09:36 localhost kernel: usb 3-2: Manufacturer: Prolific Technology Inc.
May 19 14:09:50 localhost pppd[23036]: pppd 2.4.4 started by root, uid 0
May 19 14:09:50 localhost pppd[23036]: Using interface ppp0
May 19 14:09:50 localhost pppd[23036]: Connect: ppp0 <--> /dev/ttyUSB0
May 19 14:09:53 localhost pppd[23036]: CHAP authentication succeeded:
May 19 14:09:53 localhost pppd[23036]: CHAP authentication succeeded
May 19 14:09:53 localhost pppd[23036]: local  IP address 220.197.147.45
May 19 14:09:53 localhost pppd[23036]: remote IP address 220.192.168.6
May 19 14:09:53 localhost pppd[23036]: primary   DNS address 220.192.32.103
May 19 14:09:53 localhost pppd[23036]: secondary DNS address 220.192.0.130
May 19 14:09:59 localhost pppd[23036]: Connect time 0.1 minutes.
May 19 14:09:59 localhost pppd[23036]: Sent 604 bytes, received 4 bytes.
May 19 14:10:00 localhost pppd[23036]: CHAP authentication succeeded:
May 19 14:10:00 localhost pppd[23036]: CHAP authentication succeeded
May 19 14:10:00 localhost pppd[23036]: local  IP address 220.197.149.193
May 19 14:10:00 localhost pppd[23036]: remote IP address 220.192.168.6
May 19 14:10:00 localhost pppd[23036]: primary   DNS address 220.192.32.103
May 19 14:10:00 localhost pppd[23036]: secondary DNS address 220.192.0.130
May 19 14:10:21 localhost pppd[23036]: Connect time 0.4 minutes.
May 19 14:10:21 localhost pppd[23036]: Sent 540 bytes, received 4 bytes.
May 19 14:10:21 localhost pppd[23036]: CHAP authentication succeeded:
May 19 14:10:21 localhost pppd[23036]: CHAP authentication succeeded
May 19 14:10:22 localhost pppd[23036]: local  IP address 220.197.151.77
May 19 14:10:22 localhost pppd[23036]: remote IP address 220.192.168.6
May 19 14:10:22 localhost pppd[23036]: primary   DNS address 220.192.32.103
May 19 14:10:22 localhost pppd[23036]: secondary DNS address 220.192.0.130

拨号应该是成功了的
这个需要分CMWAP和CMNET吗。我只知道移动有这个东西及区别。
在WINDOWS下使用都能上。

route －n  信息

[root@localhost log]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
220.192.168.6   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
0.0.0.0         0.0.0.0         0.0.0.0         U     0      0        0

这时我把无线网卡wlan关了

刷新网页有包的接收和发送。但就一下就空闲了。
网页还是连不上。