命令ip代替了ifconfig？

mikkoyue

自从装完LFS就没有发现ifconfig这个命令，后来才发现ip这个命令，输入man ip却得不到想要的文档，而ip help得到的太少，小弟网络并不很好，哪位朋友解释一下ip和ifconfig的区别，我想把ifconfig装上，可没有找到它的源文件。

mikkoyue

iproute2
Marcos zeta11 at arnet.com.ar
Thu Aug 21 01:18:27 MDT 2003

Previous message: ardour hint
Next message: iproute2
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

--------------------------------------------------------------------------------

updated iproute2 hint.

Zeta
-------------- next part --------------
TITLE:                Iproute2 and traffic shaping
LFS VERSION:        Kernel 2.4.20 and later versions
AUTHOR:                Marcos Zapata <zeta11 at hotpop.com>
VERSION:                2003/08/20

SYNOPSIS:
    How to compile iproute2 and some basic traffic shaping scripts for your LFS.

HINT:
Most linux distributions are starting to provide the iproute2 package,
because of the new redesigned network subsystem implemented in kernels 2.2 and
up. The old comands 'ifconfig' and 'route' are now been deprecated because of
their faulty and unexpected behaviour under these kernels.
It was written by Alexey Kuznetsov, who also wrote the routing code of the
kernels 2.2 and up. This new routing and filtering code provides many advantages
and features that weren't available before, and ip/tc are the tools to handle
it. I won't be explaining traffic shaping with CBQ and HTB, just how to get them
for your LFS. You'll find some links in references.


This package requires db. If you don't have it, you can get it at
www.sleepycat.com. For example: db-4.1.25 (actually, I've been using db-4.0.14
without any problem), from:

http://www.sleepycat.com/update/snapshot/db-4.1.25.tar.gz

tar -zxvf db-4.1.25.tar.gz
cd db-4.1.25/dist
./configure --prefix=/usr --enable-compat185
make
make install

now, we can continue with iproute2.


Where to download it?
ftp://ftp.inr.ac.ru/ip-routing/

For the purposites of this hint, I'll be using:
iproute2-2.4.7-now-ss020116-try.tar.gz and kernel-2.4.20.

Starting with kernel-2.4.20 you can find HTB and CBQ packet schedulers. If you
plan to use an older kernel (not recommended) you'll need to apply a patch to
support it. Either way we'll need to get the patch for iproute to handle HTB:

http://luxik.cdi.cz/~devik/qos/htb/v3/htb3.6-020525.tgz

The compiling and instalation of these tools is very strait-forward:

tar -zxvf htb3.6-020525.tgz
tar -zxvf iproute2-2.4.7-now-ss020116-try.tar.gz
cd iproute2

#apply the patch
patch -Np1 < ../htb3.6_tc.diff

#if you want, edit Makefile to change some values like KERNEL_INCLUDE or
#SBINDIR. You shouldn't need to if you've built LFS.

make
make install

If you didn't edit Makefile, the tools should be in /sbin, the conf. files in
/etc/iproute2 and the docs in /usr/doc/iproute2. Sadly, it doesn't include any
man pages, you'll need latex and sgmltools to read the docs. I advised you to
read them, to fully understand and use these powerful tools.

Ok, now that we have ip and tc with HTB support we need to recompile the kernel.
With 'make menuconfig' under 'Networking options', enable netlink and filtering
support, also tunneling and multicasting. To enable traffic shaping, enable all
the options in 'Qos and/or fair queueing' as modules. The exact options names
may vary for the different kernel versions. Compile the bzImage and modules,
install, and remember to add this new kernel to your lilo or grub conf. to start
with this new configuration.

If you built LFS 3.1 (I guess it could work with previous versions) you need to
change the boot scripts: localnet and network in /etc/rc.d/init.d.

localnet:

look  for 'loadproc ifconfig lo 127.0.0.1' in start), replace it with:
ip addr add 127.0.0.1/8 dev lo
ip link set lo up

look for 'loadproc ifconfig lo down' in stop), replace it with:
ip link set lo down
ip addr del 127.0.0.1 dev lo

look for 'ifconfig lo' in status), replace it with:
ip addr show lo

network:

look for 'route add default gateway $GATEWAY metric 1 dev $GATEWAY_IF',...:
ip route add default via $GATEWAY dev $GATEWAY_IF

look for 'route del -net default', replace it with:
ip route del default

Also, the scripts in /etc/sysconfig/network-devices: ifdown and ifup.

ifdown:

look for 'ifconfig $1 down', replace it with:
ip addr flush dev $1
ip link set $1 down

ifup:

look for 'ifconfig $1 $IP netmask $NETMASK broadcast $BROADCAST',....:
ip link set $1 up
ip addr add $IP/$NETMASK broadcast $BROADCAST dev $1

As you can see the ip command is very simple to use, and it's very similar to
ifconfig and route. The only thing that changes is the NETMASK.

You need to change NETMASK in /etc/sysconfig/network-devices/ifconfig.eth* :
from 255.255.255.255 to 32
..  255.255.255.0   to 24
..  255.255.0.0     to 16
..  255.0.0.0       to 8

so that ifconfig.eth0 (for example) looks something like this:
ONBOOT=yes
IP=192.168.100.254
NETMASK=24
BROADCAST=192.168.100.255


Now, let's start with some traffic shaping scripts: cbq.init and/or htb.init
and wondershaper.
Both CBQ and HTB help you to control the use of the outbound bandwidth on a
given link. Both allow you to use one physical link to simulate several slower
links and to send different kinds of traffic on different simulated links.

cbq.init:
You can get it at http://sourceforge.net/projects/cbqinit. From one of the
mirrors at:

http://heanet.dl.sourceforge.net ... nit/cbq.init-v0.7.2

mv cbq.init-v0.7.2 cbq.init
chmod a+x cbq.init
cp cbq.init /etc/rc.d/init.d
mkdir /etc/sysconfig/cbq

Remeber to add the symlinks in /etc/rc.d/rc*.d. All the explanations of this
tool are in script: how it works, parameters, and a sample.

htb.init:
It's derived from cbq.init that allows for easy setup of HTB-based traffic
control on Linux. You can get it at http://sourceforge.net/projects/htbinit. One
of the mirros:

http://keihanna.dl.sourceforge.n ... nit/htb.init-v0.8.4

mv htb.init-v0.8.4 htb.init
chmod a+x htb.init
cp htb.init /etc/rc.d/init.d
mkdir /etc/sysconfig/htb

Remember to add the symlinks in /etc/rc.d/rc*.d. Just like cbq, you can find all
you need inside the script.

You can use either one of them. CBQ is older, but it's still widely used. HTB is
easier and more accurate.

Wondershaper:
I have a very crapy dsl conection and it really help me: mantaining low latency
for interactive traffic and surfing while uploading.
We can get it at:

http://lartc.org/wondershaper/wondershaper-1.1a.tar.gz

tar -zxvf wondershaper-1.1a.tar.gz
cd wondershaper-1.1a

There are two versions of the script, for CBQ and HTB. To start, you'll need to
modify at the beginning: DOWNLINK, UPLINK and DEV. You'll also find a README in
the same directory, please read it, it will help you understand what it really
does and how to fine tunning it. Afterwards, to get them ready:

cp wshaper wshaper.htb /usr/sbin

That's it. You can reboot now and start using your LFS with these new tools.
You shouldn't have much trouble setting it up. Good luck.


REFERENCES:
http://lartc.org/lartc.txt        Linux Advanced Routing & Traffic Control:
http://luxik.cdi.cz/~devik/qos/htb/        HTB Home page


THANKS:
Daniel Thaler <daniel at dthaler.de>:        db headers, tc (wondershaper)
lfs at vs.megalink.ru:        db headers
DJ Lucas <dj_me at swbell.net>:        db headers
Samual Walters <saltwater at madasafish.com>: db headers
Diego Saravia <dsa at unsa.edu.ar>
( Sorry for taking so long to correct the hint. )



EXTRA: Automatic generation of broadcast addresses with LFS
I was not sure to include this but here it goes, if it can be of any use...
I was tired of calculating broadcast addresses, so i decided to modify the ifup
script from LFS to do just that. It's not very clean and surely not the
paradigm of programming but it works just fine. You've been warned!

You need bc. Get it at:

ftp://ftp.gnu.org/gnu/bc/bc-1.06.tar.gz

tar -zxvf bc-1.06.tar.gz
cd bc-1.06
./configure --prefix=/usr
make
make install

and rpncalc at:

http://ftp.debian.org/debian/poo ... ncalc_1.33.3.tar.gz

tar -zxvf rpncalc_1.33.3.tar.gz
cd rpncalc-1.33.3
./configure --prefix=/usr
make
make MKINSTALLDIRS=mkinstalldirs install

The script:

---/etc/sysconfig/network-devices/ifup---

1. #!/bin/sh
   
2. 
   
3. source /etc/sysconfig/rc
   
4. source $rc_functions
   
5. source $network_devices/ifconfig.$1
   
6. 
   
7. if [ -f $network_devices/ifup-$1 ]
   
8. then
   
9.         $network_devices/ifup-$1
   
10. else
    
11.         if [ -z $IP ]
    
12.         then
    
13.                 echo "IP variable missing for ifconfig.$1, cannot continue"
    
14.                 exit 1
    
15.         fi
    
16. 
    
17.         if [ -z $NETMASK ]
    
18.         then
    
19.                 echo -n "NETMASK variable missing for ifconfig.$1, "
    
20.                 echo "using 255.255.255.0"
    
21.                 NETMASK=255.255.255.0
    
22.         fi
    
23. 
    
24.         if [ "`echo "$NETMASK" | grep "\."`" ]; then
    
25.           MASK=0
    
26.           for i in `seq 1 4`; do
    
27.             OC=`echo "$NETMASK" | cut -d'.' -f$i`
    
28.             for j in `seq 0 7`; do
    
29.               BIN=`echo "256-2^$j" | bc`
    
30.               if [ $BIN == $OC ]; then
    
31.                 k=`echo "8-$j" | bc`
    
32.                 let MASK=MASK+$k
    
33.                 break
    
34.               fi
    
35.             done
    
36.           done
    
37.         else
    
38.           MASK=$NETMASK
    
39.         fi
    
40. 
    
41.         if [ -z $BROADCAST ]
    
42.         then
    
43.             if [ $MASK -lt 24 ]; then
    
44.                 # Good luck!
    
45.                 NETMASK=""
    
46.                 MSK=$MASK
    
47.                 DIF=`echo "256-2^(8-$MASK%8)" | bc`
    
48.                 for i in `seq 1 4`; do
    
49.                   let MSK=MSK-8
    
50.                   if [ $MSK -gt -1 ]; then
    
51.                     NETMASK=$NETMASK.255
    
52.                   else
    
53.                   if [ $MSK -lt -8 ]; then
    
54.                     NETMASK=$NETMASK.0
    
55.                   else
    
56.                     NETMASK=$NETMASK.$DIF
    
57.                   fi
    
58.                 fi
    
59.                 done
    
60.                 NETMASK=`echo "$NETMASK" | sed -e "s/^.//"`
    
61. 
    
62.                 BROADCAST=""
    
63.                 for i in `seq 1 4`; do
    
64.                     OC=`echo "$IP" | cut -d'.' -f$i`
    
65.                     OC2=`echo "$NETMASK" | cut -d'.' -f$i`
    
66.                     BROADCAST="$BROADCAST.`echo "$OC 255 $OC2 xor or" | rpncalc | cut -d' ' -f3`"
    
67.                 done
    
68.                 BROADCAST=`echo "$BROADCAST" | sed -e "s/^.//"`
    
69.             else
    
70.                 # Calculo automatico solo para redes C
    
71.                 CAN=`echo "2^($MASK-24)" | bc`
    
72.                 OCTIP=`echo "$IP" | cut -d'.' -f4`
    
73.                 OCT3IP=`echo "$IP" | cut -d'.' -f-3`
    
74.                 BROADCAST=""
    
75. 
    
76.                 for i in `seq 1 $CAN`; do
    
77.                   RED=`echo "256/$CAN*($i-1)" | bc`
    
78.                   BROAD=`echo "$RED+256/$CAN-1" | bc`
    
79.                   if [ $OCTIP -gt $RED -a $BROAD -gt $OCTIP ]; then
    
80.                       BROADCAST="$OCT3IP.$BROAD"
    
81.                       break
    
82.                   fi
    
83.                 done  
    
84.             fi
    
85.         fi
    
86.         if [ -z $BROADCAST ]
    
87.         then
    
88.                 echo "Cannot calculate broadcast for ifconfig.$1, something is wrong"
    
89.                 echo "Please check your IP=$IP and NETMASK=$MASK variables"
    
90.                 exit 1
    
91.         fi
    
92. 
    
93.         echo "Bringing up the $1 interface..."
    
94.         ip link set $1 up
    
95.         ip addr add $IP/$MASK broadcast $BROADCAST dev $1
    
96.         evaluate_retval
    
97. fi

复制代码

---/etc/sysconfig/network-devices/ifup---


This script will calculate the correct broadcast address from the ip address
and netmask. It will work with all kinds of classes: A, B and C. Although,
it will only "check" for a valid broadcast address from /24 to /32 and as you
can see, you can now use NETMASK in ifconfig.eth* with a full address like
255.255.255.192 or 26. To use it just comment out BROADCAST in ifconfig.eth*.
Good luck.



Zeta