FC2重新编辑内核心得

gigi

多谢aaccdd兄！hupeng923兄！

leonchen_mail

你在编译新内核之前安装了module-init-tools了么？如果安装了你用的是哪个版本？
问一个比较弱的问题，那个 depmod -a是干什么用的？我在fedora core 1里编译内核重来没有用过这个命令。就是make && make modules && make modules_install && make install就ok了。

hades

最初由 leonchen_mail 发表
你在编译新内核之前安装了module-init-tools了么？如果安装了你用的是哪个版本？
问一个比较弱的问题，那个 depmod -a是干什么用的？我在fedora core 1里编译内核重来没有用过这个命令。就是make && make modules && make modules_install && make install就ok了。

我安装的是FC2,再重新编辑内核的，不用再安装module-tools了，至于depmod -a 是将各个模块与设备之间的关系确定了，不过没这步也没什么问题的。

小韦

牛人！！！

leonchen_mail

谢谢了，hades兄弟。

jetwins

最初由 aaccdd 发表
楼上的，
更改内核配置后当然需要重新编译了，
不过在原来编译的基础上会很快的，
编译成功后，
可能需要改的就是两点：
1,重新安装显卡驱动；
2,重启后，删去/boot目录下原来的*.old文件

多谢指导，但我还是不明白更改内核配置后重新编译时还是先make再make module，还是直接make module就行了？还有就是第二次内核编译后镜像怎么才能和第一分开呢？
谢谢

hades

最初由 hades 发表
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
看着选吧，如果你想用你的MP3的话(我这样说对不对呀？)

这里有修改：
CONFIG_BLK_DEV_LOOP
CONFIG_BLK_DEV_RAM
这两项要选上，我原来是没选择 这两个的，结果挂接ISO的时候提示说不是loop什么的，原来是这里没有选择。
现在的结果是：
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y

hades

最初由 hades 发表
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

如果你要使用移动硬盘，CONFIG_SCSI=m是一定要选择的，而最好是将它做为一个modules来处理。因为我没别的SCSI设备了，所以几乎是全部NO
MD咋还有一个漏的：CONFIG_SCSI_QLA2XXX=m，回家再编辑一下，去掉，这是个没用的东西，当时没注意:eek: :eek: :eek:

这个CONFIG_SCSI_QLA2XXX=m是默认要编辑进内核的，不用担心了:p :p :p

hades

最初由 hades 发表
Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
CONFIG_SOUND_ES1371=y
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
CONFIG_SOUND_GUS16=y
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=m
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set

唉，虽然2.6.6有了ALAS的支持，我还是没有用，为什么？因为我只要是有声音就行了，我想我的NOTEBOOK再好也没有5.1的功能，所以还是用OSS吧。其实这里有几个地方是没用的如：
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
CONFIG_SOUND_GUS16=y
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=m

就是这里的几个选项，在编辑的时候报错说：编辑了也没用:p :p :p ，为啥？因为我没那声卡呀。:help

这里我要重新说明了，现在我用新的内核：2.6.7这部分的选择是：
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

咋就一项了，因为我现在安装了ALSA-1.0.5a,爽呀，UT 2004  Q3全都可以正常玩了(原来UT204、Q3用OSS驱动时，前者有好大的噪音后者进入游戏没声音)，用了ALSA，全都解决。
安装ALSA请见rr19xx兄的指南(我的回贴在最后哟)
http://www.linuxsir.cn/bbs/showthread.php?threadid=45116

7dehao

精华！感谢hades兄！