ZTE MU350 成功上网（TD-SCDMA linux 3G）

可爱的卧底 · 发表于 2009-8-20 19:04:10

谢谢您了！问题已经解决了。
下午我发贴说是2G网络，系我们办公室3G信号无的原因，回家一拨号就是MU350 3G网络的蓝灯了。
另外需要补充一点，就是貌似需要手动设置DNS服务器，就是 vi /etc/resolv.conf ，拨号完成后他会告诉你用哪个DNS的。
太高兴了，谢谢您。
另外想请问下您这个是原创么？我想保留本帖链接的情况下将此文转载到我的博客或者其他网站，可以么？

danielliu · 发表于 2009-8-20 20:17:38

是原贴，可以转载，你可以将你的比如2G/3G的问题放进去。

可爱的卧底 · 发表于 2009-8-20 20:38:41

关于2/3G网络切换的问题：
我是记得看其他的帖子貌似有说需要写一个2G拨号的脚本，写一个3G拨号的脚本，在办公室的时候恰好也没有3G网络，才造成的这个误会。
您的脚本会让MU350自动运行在3G网络下，只有3G拨不通了才用2G网络，功能很好很强大的！
我这里网络很好，网络不好的同学们可以试试2G/3G网络的切换是否平稳！。
再次谢谢刘/柳工了！

danielliu · 发表于 2009-8-20 22:07:27

我也学习了，一直不明白：为什么能上网但有时灯的颜色却不一样，原来是2/3G的问题。谢谢。

lisheng1365 · 发表于 2009-9-13 01:30:51

我也成功上网了，我的是MU351。美中不足的是不能用网络管理器来拨号，而且没法统计流量。

我没看见2G/3G切换的脚本啊？

中兴什么时候能推出官方驱动呢？它的包装上可是明确写了不支持MAC和Linux操作系统。

bossel · 发表于 2009-10-21 23:20:50

Thanks for your explanation on ZTE MU350, Daniel. Tried it (in combination with info from linuxren) on ZTE MU351, but I run into one major problem. The modem doesn't appear.

The details:

Kubuntu 8.04 on HP

Modem Location:

UHCI Host Controller (3)
Linux 2.6.24-24-generic uhci_hcd
serial no.: 0000:00:1d.2
class: 9 (hub)
subclass: 0 (unused)
protocol: 0 (full speed (or root) hub)

复制代码

lsusb shows:

Bus 003 Device 002: ID 19d2:0003

复制代码

run modeswitch:

Reading config file: /etc/usb_modeswitch.conf
DefaultVendor= 0x19d2
DefaultProduct= 0x0003
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
MessageEndpoint= not set
MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 002 on 003
usb_os_find_devices: Found 001 on 003
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 005 on 002
usb_os_find_devices: Found 004 on 002
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 003 on 002
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 001
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 003 ...
Using endpoints 0x04 (out) and 0x84 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Received inquiry data (detailed identification)
-------------------------
Vendor String: ZTE Corp
Product String: CD-ROM
Revision String: 0.01
-------------------------
Device description data (identification)
-------------------------
Manufacturer: ZTE Corp
Product: TD-SCDMA USB Modem
Serial No.: 000000000000
-------------------------
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x04 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye.

复制代码

lsusb after:

Bus 003 Device 003: ID 19d2:0003

复制代码

run wvdial:

--> WvDial: Internet dialer version 1.60
--> Cannot open / dev/ttyUSB2: No such file or directory
--> Cannot open / dev/ttyUSB2: No such file or directory
--> Cannot open / dev/ttyUSB2: No such file or directory

复制代码

after modeswitch Dolphin shows:

scd1 eWalk_ZTE
scd2 eWalk_ZTE
63MB Removable Media

复制代码

.hal-mtab shows:

/dev/scd1 1000 0 iso9660 nosuid,nodev,uhelper=hal,uid=1000,noatime,utf8 /media/eWalk_ZTE
/dev/scd2 1000 0 iso9660 nosuid,nodev,uhelper=hal,uid=1000,noatime,utf8 /media/eWalk_ZTE-1
/dev/sdc 1000 0 vfat nosuid,nodev,uhelper=hal,flush,uid=1000,noatime,utf8,shortname=lower /media/disk

复制代码

dmesg shows:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Tue Aug 18 17:04:53 UTC 2009 (Ubuntu 2.6.24-24.59-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
[ 0.000000] BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 260048) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260048
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260048
[ 0.000000] On node 0 totalpages: 260048
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30433 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7B60 checksum 0
[ 0.000000] ACPI: RSDP 000F7B60, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 3F7E57C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP 3F7E5684, 00F4 (r4 HP 30A2 3 HP 1)
[ 0.000000] ACPI: DSDT 3F7E5AC0, F9A0 (r1 HP nx7400 10000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F7F7E80, 0040
[ 0.000000] ACPI: SLIC 3F7E5838, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: HPET 3F7E59B0, 0038 (r1 HP 30A2 1 HP 1)
[ 0.000000] ACPI: APIC 3F7E59E8, 0068 (r1 HP 30A2 1 HP 1)
[ 0.000000] ACPI: MCFG 3F7E5A50, 003C (r1 HP 30A2 1 HP 1)
[ 0.000000] ACPI: TCPA 3F7E5A8C, 0032 (r2 HP 30A2 1 HP 1)
[ 0.000000] ACPI: SSDT 3F7F5460, 0326 (r1 HP HPQSAT 1 MSFT 100000E)
[ 0.000000] ACPI: SSDT 3F7F5786, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317)
[ 0.000000] ACPI: SSDT 3F7F5C51, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 3F7F5EB0, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258017
[ 0.000000] Kernel command line: root=UUID=8f73303f-b576-4968-b3eb-c04a78453265 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1862.052 MHz processor.
[ 13.528974] Console: colour VGA+ 80x25
[ 13.528978] console [tty0] enabled
[ 13.529268] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.529662] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.557829] Memory: 1018652k/1040192k available (2181k kernel code, 20788k reserved, 1006k data, 368k init, 122688k highmem)
[ 13.557837] virtual kernel memory layout:
[ 13.557838] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 13.557839] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.557840] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 13.557841] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 13.557842] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 13.557844] .data : 0xc0321548 - 0xc041cdc4 (1006 kB)
[ 13.557845] .text : 0xc0100000 - 0xc0321548 (2181 kB)
[ 13.557848] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.557888] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.558028] hpet clockevent registered
[ 13.637897] Calibrating delay using timer specific routine.. 3728.22 BogoMIPS (lpj=7456444)
[ 13.637922] Security Framework initialized
[ 13.637932] SELinux: Disabled at boot.
[ 13.637948] AppArmor: AppArmor initialized
[ 13.637952] Failure registering capabilities with primary security module.
[ 13.637960] Mount-cache hash table entries: 512
[ 13.638090] Initializing cgroup subsys ns
[ 13.638098] Initializing cgroup subsys cpuacct
[ 13.638110] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 00000000
[ 13.638117] monitor/mwait feature present.
[ 13.638118] using mwait in idle threads.
[ 13.638122] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.638125] CPU: L2 cache: 1024K
[ 13.638129] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042940 0000c109 00000000 00000000 00000000
[ 13.638140] Compat vDSO mapped to ffffe000.
[ 13.638154] Checking 'hlt' instruction... OK.
[ 13.654292] SMP alternatives: switching to UP code
[ 13.656042] Freeing SMP alternatives: 11k freed
[ 13.656157] Early unpacking initramfs... done
[ 13.998990] ACPI: Core revision 20070126
[ 13.999105] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 14.074571] CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping 0c
[ 14.074588] Total of 1 processors activated (3728.22 BogoMIPS).
[ 14.074783] ENABLING IO-APIC IRQs
[ 14.074976] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.220931] Brought up 1 CPUs
[ 14.220955] CPU0 attaching sched-domain:
[ 14.220957] domain 0: span 01
[ 14.220959] groups: 01
[ 14.221122] net_namespace: 64 bytes
[ 14.221131] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 14.221136] Booting paravirtualized kernel on bare hardware
[ 14.221567] Time: 18:59:40 Date: 10/21/09
[ 14.221590] NET: Registered protocol family 16
[ 14.221775] EISA bus registered
[ 14.221780] ACPI: bus type pci registered
[ 14.223076] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[ 14.223078] PCI: Using configuration type 1
[ 14.223092] Setting up standard PCI resources
[ 14.224945] ACPI: EC: Look up EC in DSDT
[ 14.226087] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 14.260596] ACPI: Interpreter enabled
[ 14.260599] ACPI: (supports S0 S3 S4 S5)
[ 14.260610] ACPI: Using IOAPIC for interrupt routing
[ 14.269733] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 14.269736] ACPI: EC: driver started in interrupt mode
[ 14.269800] ACPI: PCI Root Bridge [C002] (0000:00)
[ 14.270607] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 14.270612] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[ 14.271417] PCI: Transparent bridge - 0000:00:1e.0
[ 14.271508] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 14.271844] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
[ 14.272000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C104._PRT]
[ 14.272137] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C114._PRT]
[ 14.272275] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C11A._PRT]
[ 14.309216] ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
[ 14.309433] ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
[ 14.309648] ACPI: PCI Interrupt Link [C112] (IRQs 10 *11)
[ 14.309862] ACPI: PCI Interrupt Link [C113] (IRQs *10 11)
[ 14.310075] ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
[ 14.310281] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.
[ 14.310489] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.
[ 14.310592] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 14.310782] ACPI: Power Resource [C21D] (on)
[ 14.310833] ACPI: Power Resource [C226] (off)
[ 14.310940] ACPI: Power Resource [C320] (off)
[ 14.311042] ACPI: Power Resource [C321] (off)
[ 14.311144] ACPI: Power Resource [C322] (off)
[ 14.311247] ACPI: Power Resource [C323] (off)
[ 14.311298] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.311329] pnp: PnP ACPI init
[ 14.311336] ACPI: bus type pnp registered
[ 14.318818] pnp: PnP ACPI: found 12 devices
[ 14.318820] ACPI: ACPI bus type pnp unregistered
[ 14.318825] PnPBIOS: Disabled by ACPI PNP
[ 14.319032] PCI: Using ACPI for IRQ routing
[ 14.319036] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.440514] NET: Registered protocol family 8
[ 14.440517] NET: Registered protocol family 20
[ 14.440552] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 14.440556] hpet0: 3 64-bit timers, 14318180 Hz
[ 14.441597] AppArmor: AppArmor Filesystem Enabled
[ 14.444499] Time: tsc clocksource has been installed.
[ 14.444516] Switched to high resolution mode on CPU 0
[ 14.452478] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 14.452481] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 14.452484] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 14.452494] system 00:09: ioport range 0x500-0x57f has been reserved
[ 14.452497] system 00:09: ioport range 0x800-0x80f has been reserved
[ 14.452500] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 14.452503] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 14.452508] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 14.452511] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 14.452513] system 00:0a: ioport range 0x1100-0x113f has been reserved
[ 14.452516] system 00:0a: ioport range 0x1200-0x121f has been reserved
[ 14.452519] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[ 14.452522] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 14.452525] system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 14.452528] system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 14.452531] system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved
[ 14.452536] system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 14.452539] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 14.482890] PCI: Bridge: 0000:00:1c.0
[ 14.482892] IO window: disabled.
[ 14.482898] MEM window: disabled.
[ 14.482902] PREFETCH window: disabled.
[ 14.482908] PCI: Bridge: 0000:00:1c.1
[ 14.482909] IO window: disabled.
[ 14.482915] MEM window: f4000000-f40fffff
[ 14.482919] PREFETCH window: disabled.
[ 14.482925] PCI: Bridge: 0000:00:1c.3
[ 14.482927] IO window: 2000-3fff
[ 14.482933] MEM window: f0000000-f3ffffff
[ 14.482937] PREFETCH window: disabled.
[ 14.482948] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 14.482950] IO window: 00001400-000014ff
[ 14.482955] IO window: 00001800-000018ff
[ 14.482960] PREFETCH window: 40000000-43ffffff
[ 14.482965] MEM window: 44000000-47ffffff
[ 14.482969] PCI: Bridge: 0000:00:1e.0
[ 14.482971] IO window: disabled.
[ 14.482976] MEM window: f4100000-f43fffff
[ 14.482980] PREFETCH window: disabled.
[ 14.483014] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.483021] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.483045] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 14.483051] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.483074] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 14.483079] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 14.483093] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 14.483111] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 14.483125] NET: Registered protocol family 2
[ 14.520387] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.520608] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 14.521449] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.521933] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.521937] TCP reno registered
[ 14.532473] checking if image is initramfs... it is
[ 15.205062] Freeing initrd memory: 7709k freed
[ 15.205725] audit: initializing netlink socket (disabled)
[ 15.205738] audit(1256151580.472:1): initialized
[ 15.205899] highmem bounce pool size: 64 pages
[ 15.207675] VFS: Disk quotas dquot_6.5.1
[ 15.207744] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.207878] io scheduler noop registered
[ 15.207881] io scheduler anticipatory registered
[ 15.207883] io scheduler deadline registered
[ 15.207894] io scheduler cfq registered (default)
[ 15.207905] Boot video device is 0000:00:02.0
[ 15.208101] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.208158] assign_interrupt_mode Found MSI capability
[ 15.208206] Allocate Port Service[0000:00:1c.0:pcie00]
[ 15.208241] Allocate Port Service[0000:00:1c.0:pcie02]
[ 15.208339] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.208395] assign_interrupt_mode Found MSI capability
[ 15.208439] Allocate Port Service[0000:00:1c.1:pcie00]
[ 15.208469] Allocate Port Service[0000:00:1c.1:pcie02]
[ 15.208566] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 15.208622] assign_interrupt_mode Found MSI capability
[ 15.208666] Allocate Port Service[0000:00:1c.3:pcie00]
[ 15.208702] Allocate Port Service[0000:00:1c.3:pcie02]
[ 15.208936] isapnp: Scanning for PnP cards...
[ 15.562577] isapnp: No Plug & Play device found
[ 15.588998] Real Time Clock Driver v1.12ac
[ 15.589258] hpet_resources: 0xfed00000 is busy
[ 15.589309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.590499] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.590563] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 15.590656] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
[ 15.592457] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 15.593207] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.593211] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 15.593214] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 15.593216] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 15.593218] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 15.594704] mice: PS/2 mouse device common for all mice
[ 15.594812] EISA: Probing bus 0 at eisa.0
[ 15.594819] Cannot allocate resource for EISA slot 1
[ 15.594821] Cannot allocate resource for EISA slot 2
[ 15.594823] Cannot allocate resource for EISA slot 3
[ 15.594825] Cannot allocate resource for EISA slot 4
[ 15.594843] EISA: Detected 0 cards.
[ 15.594846] cpuidle: using governor ladder
[ 15.594848] cpuidle: using governor menu
[ 15.594934] NET: Registered protocol family 1
[ 15.594960] Using IPI No-Shortcut mode
[ 15.594992] registered taskstats version 1
[ 15.595090] Magic number: 13:953:999
[ 15.595104] hash matches device ttyaf
[ 15.595191] hash matches device 00:01
[ 15.595192] hash matches device pnp0
[ 15.595218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 15.595220] EDD information not available.
[ 15.595398] Freeing unused kernel memory: 368k freed
[ 15.595422] Write protecting the kernel read-only data: 802k
[ 15.622453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 16.807927] fuse init (API version 7.9)
[ 16.820061] ACPI: Transitioning device [C324] to D3
[ 16.820064] ACPI: Transitioning device [C324] to D3
[ 16.820068] ACPI: Fan [C324] (off)
[ 16.820266] ACPI: Transitioning device [C325] to D3
[ 16.820268] ACPI: Transitioning device [C325] to D3
[ 16.820270] ACPI: Fan [C325] (off)
[ 16.820482] ACPI: Transitioning device [C326] to D3
[ 16.820484] ACPI: Transitioning device [C326] to D3
[ 16.820487] ACPI: Fan [C326] (off)
[ 16.820682] ACPI: Transitioning device [C327] to D3
[ 16.820684] ACPI: Transitioning device [C327] to D3
[ 16.820689] ACPI: Fan [C327] (off)
[ 16.832488] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.832494] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 16.832509] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 16.850723] ACPI: Thermal Zone [TZ0] (38 C)
[ 16.865274] ACPI: Thermal Zone [TZ1] (39 C)
[ 16.879958] ACPI: Thermal Zone [TZ2] (30 C)
[ 16.882351] ACPI: Thermal Zone [TZ3] (29 C)
[ 16.883192] ACPI: Thermal Zone [TZ4] (65 C)
[ 17.612877] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.612891] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 17.634937] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 17.634950] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 17.634959] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 17.634968] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 17.638992] usbcore: registered new interface driver usbfs
[ 17.639017] usbcore: registered new interface driver hub
[ 17.650914] usbcore: registered new device driver usb
[ 17.662839] USB Universal Host Controller Interface driver v3.0
[ 17.674920] ssb: Sonics Silicon Backplane found on PCI device 0000:10:00.0
[ 17.675192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 17.675204] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 17.675208] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.675493] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 17.675529] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 17.675667] usb usb1: configuration #1 chosen from 1 choice
[ 17.675689] hub 1-0:1.0: USB hub found
[ 17.675694] hub 1-0:1.0: 2 ports detected
[ 17.781814] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
[ 17.781828] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 17.781832] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.781855] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 17.781892] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 17.781997] usb usb2: configuration #1 chosen from 1 choice
[ 17.782019] hub 2-0:1.0: USB hub found
[ 17.782025] hub 2-0:1.0: 2 ports detected
[ 17.788500] SCSI subsystem initialized
[ 17.842550] libata version 3.00 loaded.
[ 17.882591] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 17.882605] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 17.882610] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.882632] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 17.882668] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
[ 17.882775] usb usb3: configuration #1 chosen from 1 choice
[ 17.882803] hub 3-0:1.0: USB hub found
[ 17.882808] hub 3-0:1.0: 2 ports detected
[ 17.986417] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 17.986431] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.986436] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.986460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 17.986495] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
[ 17.986605] usb usb4: configuration #1 chosen from 1 choice
[ 17.986628] hub 4-0:1.0: USB hub found
[ 17.986633] hub 4-0:1.0: 2 ports detected
[ 18.090321] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 18.090337] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.090341] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.090370] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 18.094264] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.094271] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 18.094278] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 18.122063] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 18.134037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.134172] usb usb5: configuration #1 chosen from 1 choice
[ 18.134196] hub 5-0:1.0: USB hub found
[ 18.134203] hub 5-0:1.0: 8 ports detected
[ 18.238079] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.257855] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 18.257864] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 18.257871] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 18.297830] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 18.297856] b44.c:v2.0
[ 18.297905] ACPI: PCI Interrupt 0000:02:06.1[b] -> GSI 19 (level, low) -> IRQ 18
[ 18.347605] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 18.350886] ahci 0000:00:1f.2: version 3.0
[ 18.350916] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
[ 18.350965] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports
[ 18.350968] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 18.357969] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:e5:b0:ed
[ 18.724996] Clocksource tsc unstable (delta = -606004738 ns)
[ 18.729251] Time: hpet clocksource has been installed.
[ 18.757697] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 18.785253] usb 2-2: configuration #1 chosen from 1 choice
[ 18.787347] hub 2-2:1.0: USB hub found
[ 18.789309] hub 2-2:1.0: 4 ports detected
[ 18.920540] usb 2-2.2: new low speed USB device using uhci_hcd and address 4
[ 18.954909] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 18.954913] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 18.954920] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 18.955177] scsi0 : ahci
[ 18.955425] scsi1 : ahci
[ 18.955555] scsi2 : ahci
[ 18.955682] scsi3 : ahci
[ 18.955743] ata1: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 220
[ 18.955747] ata2: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585180 irq 220
[ 18.955751] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585200 irq 220
[ 18.955755] ata4: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585280 irq 220
[ 18.980147] usb 2-2.2: configuration #1 chosen from 1 choice
[ 19.074342] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929bd210e]
[ 19.079962] usb 2-2.4: new full speed USB device using uhci_hcd and address 5
[ 19.127482] usb 2-2.4: not running at top speed; connect to a high speed hub
[ 19.132739] usb 2-2.4: configuration #1 chosen from 1 choice
[ 19.134511] usbcore: registered new interface driver hiddev
[ 19.148489] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
[ 19.150453] input,hidraw0: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-2.2
[ 19.150473] usbcore: registered new interface driver usbhid
[ 19.150477] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 19.151309] usbcore: registered new interface driver libusual
[ 19.162454] Initializing USB Mass Storage driver...
[ 19.166645] scsi4 : SCSI emulation for USB Mass Storage devices
[ 19.167104] usbcore: registered new interface driver usb-storage
[ 19.167108] USB Mass Storage support registered.
[ 19.167190] usb-storage: device found at 5
[ 19.167192] usb-storage: waiting for device to settle before scanning
[ 19.203154] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.205473] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 19.205477] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 19.205540] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 19.205907] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 19.206669] ata1.00: ATA-7: ST980811AS, 3.BHD, max UDMA/100
[ 19.206671] ata1.00: 156301488 sectors, multi 16: LBA48
[ 19.209091] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 19.209094] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 19.209164] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 19.209529] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 19.210307] ata1.00: configured for UDMA/100
[ 19.212097] ata1.00: configured for UDMA/100
[ 19.212100] ata1: EH complete
[ 19.255010] ata2: SATA link down (SStatus 0 SControl 0)
[ 19.297624] ata3: SATA link down (SStatus 0 SControl 0)
[ 19.340114] ata4: SATA link down (SStatus 0 SControl 0)
[ 19.340235] scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.BH PQ: 0 ANSI: 5
[ 19.341143] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.341180] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.341194] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 19.346701] ata_piix 0000:00:1f.1: version 2.12
[ 19.346720] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.346755] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.347111] scsi5 : ata_piix
[ 19.347440] scsi6 : ata_piix
[ 19.347930] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[ 19.347933] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[ 19.353815] Driver 'sd' needs updating - please use bus_type methods
[ 19.356111] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.356124] sd 0:0:0:0: [sda] Write Protect is off
[ 19.356127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.356144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.356196] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.356205] sd 0:0:0:0: [sda] Write Protect is off
[ 19.356208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.356223] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.356226] sda: sda1 sda3 < sda5 sda6 sda7 >
[ 19.427029] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.432946] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.667992] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2
[ 19.827120] ata5.00: configured for MWDMA2
[ 19.827175] ata6: port disabled. ignoring.
[ 19.829511] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PC05 PQ: 0 ANSI: 5
[ 19.829587] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 19.837676] Driver 'sr' needs updating - please use bus_type methods
[ 19.844238] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.844243] Uniform CD-ROM driver Revision: 3.20
[ 19.844288] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 19.914798] Attempting manual resume
[ 19.914801] swsusp: Resume From Partition 8:7
[ 19.914803] PM: Checking swsusp image.
[ 19.914905] PM: Resume from disk failed.
[ 19.959990] kjournald starting. Commit interval 5 seconds
[ 19.960001] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.157182] usb-storage: device scan complete
[ 23.160166] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 23.165138] sd 4:0:0:0: [sdb] 7856128 512-byte hardware sectors (4022 MB)
[ 23.168131] sd 4:0:0:0: [sdb] Write Protect is off
[ 23.168134] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 23.168136] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 23.180112] sd 4:0:0:0: [sdb] 7856128 512-byte hardware sectors (4022 MB)
[ 23.183105] sd 4:0:0:0: [sdb] Write Protect is off
[ 23.183107] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 23.183109] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 23.183113] sdb: sdb1
[ 23.323931] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 23.323965] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 34.999823] Linux agpgart interface v0.102
[ 35.071654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.115645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.291290] agpgart: Detected an Intel 945GM Chipset.
[ 35.291581] agpgart: Detected 7932K stolen memory.
[ 35.308178] agpgart: AGP aperture is 256M @ 0xe0000000
[ 35.791431] input: Power Button (FF) as /devices/virtual/input/input3
[ 35.806319] ACPI: Power Button (FF) [PWRF]
[ 35.806446] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 35.822267] ACPI: Sleep Button (CM) [C243]
[ 35.822349] input: Lid Switch as /devices/virtual/input/input5
[ 35.822462] ACPI: Lid Switch [C23C]
[ 35.922519] ACPI: AC Adapter [C1BC] (on-line)
[ 36.148896] ACPI: Battery Slot [C1BE] (battery present)
[ 36.149106] ACPI: Battery Slot [C1BD] (battery absent)
[ 36.149581] ACPI: WMI-Acer: Mapper loaded
[ 36.205622] ieee80211_crypt: registered algorithm 'NULL'
[ 36.210050] wl: module license 'MIXED/Proprietary' taints kernel.
[ 37.216849] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 37.231767] ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
[ 37.810086] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 37.810119] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 38.393199] b43-phy0: Broadcom 4311 WLAN found
[ 38.433617] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8
[ 38.433640] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 38.486461] phy0: Selected rate control algorithm 'simple'
[ 38.609491] iTCO_vendor_support: vendor-support=0
[ 38.625638] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 38.625734] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 38.625771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 38.724091] intel_rng: FWH not detected
[ 38.998116] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
[ 38.998139] Yenta: Enabling burst memory read transactions
[ 38.998145] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 38.998147] Yenta: Routing CardBus interrupts to PCI
[ 38.998153] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
[ 39.229032] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[ 39.229037] Socket status: 30000006
[ 39.229040] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 39.229045] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
[ 39.408047] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 40.371075] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 40.371082] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 40.410477] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 41.679963] cs: IO port probe 0x100-0x3af: clean.
[ 41.681981] cs: IO port probe 0x3e0-0x4ff: clean.
[ 41.682812] cs: IO port probe 0x820-0x8ff: clean.
[ 41.683498] cs: IO port probe 0xc00-0xcf7: clean.
[ 41.684344] cs: IO port probe 0xa00-0xaff: clean.
[ 41.838752] lp: driver loaded but no devices found
[ 42.116930] Adding 1020088k swap on /dev/sda7. Priority:-1 extents:1 across:1020088k
[ 42.525062] EXT3 FS on sda6, internal journal
[ 42.683441] device-mapper: uevent: version 1.0.3
[ 42.683471] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 44.006630] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.359453] PPP generic driver version 2.4.2
[ 44.416493] NET: Registered protocol family 17
[ 44.482381] NET: Registered protocol family 10
[ 44.482603] lo: Disabled Privacy Extensions
[ 44.483868] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.367976] No dock devices found.
[ 47.058412] apm: BIOS not found.
[ 47.747902] ppdev: user-space parallel port driver
[ 48.069493] audit(1256122818.584:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5581 profile="/usr/sbin/cupsd" namespace="default"
[ 49.164005] [drm] Initialized drm 1.1.0 20060810
[ 49.187953] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 49.187964] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 49.188046] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 52.338306] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 52.338312] vboxdrv: Successfully done.
[ 52.338314] vboxdrv: Found 1 processor cores.
[ 52.338316] vboxdrv: fAsync=0 u64DiffCores=1.
[ 52.338360] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 52.338363] vboxdrv: Successfully loaded version 1.6.0 (interface 0x00070001).
[ 54.396532] input: b43-phy0 as /devices/virtual/input/input9
[ 54.848804] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 54.851055] Bluetooth: Core ver 2.11
[ 54.851689] NET: Registered protocol family 31
[ 54.851693] Bluetooth: HCI device and connection manager initialized
[ 54.851697] Bluetooth: HCI socket layer initialized
[ 54.927408] Bluetooth: L2CAP ver 2.9
[ 54.927413] Bluetooth: L2CAP socket layer initialized
[ 55.015650] Bluetooth: RFCOMM socket layer initialized
[ 55.015666] Bluetooth: RFCOMM TTY layer initialized
[ 55.015668] Bluetooth: RFCOMM ver 1.8
[ 56.283102] b43-phy0 debug: Chip initialized
[ 56.283297] b43-phy0 debug: 32-bit DMA initialized
[ 56.302920] Registered led device: b43-phy0:tx
[ 56.302940] Registered led device: b43-phy0:rx
[ 56.302958] Registered led device: b43-phy0:radio
[ 56.302995] b43-phy0 debug: Wireless interface started
[ 56.302999] b43-phy0 debug: Adding Interface type 2
[ 56.305550] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3323.359155] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 3323.478940] usb 3-2: device descriptor read/64, error -71
[ 3323.745685] usb 3-2: configuration #1 chosen from 1 choice
[ 3323.830416] scsi7 : SCSI emulation for USB Mass Storage devices
[ 3323.882282] usb-storage: device found at 2
[ 3323.882287] usb-storage: waiting for device to settle before scanning
[ 3328.874761] usb-storage: device scan complete
[ 3328.877751] scsi 7:0:0:0: CD-ROM ZTE Corp CD-ROM 0.01 PQ: 0 ANSI: 0
[ 3328.934747] sr1: scsi3-mmc drive: 52x/52x cd/rw tray
[ 3328.934815] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 3328.934863] sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 3335.861703] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3335.871687] ISOFS: changing to secondary root
[ 5285.848294] usb 3-2: USB disconnect, address 2
[ 5286.087775] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 5286.207536] usb 3-2: device descriptor read/64, error -71
[ 5286.475578] usb 3-2: configuration #1 chosen from 1 choice
[ 5286.506121] scsi8 : SCSI emulation for USB Mass Storage devices
[ 5286.520372] usb-storage: device found at 3
[ 5286.520377] usb-storage: waiting for device to settle before scanning
[ 5291.511827] usb-storage: device scan complete
[ 5291.514808] scsi 8:0:0:0: CD-ROM ZTE Corp CD-ROM 0.01 PQ: 0 ANSI: 0
[ 5291.520819] scsi 8:0:0:1: Direct-Access ZTE Corp Flash Disk 0.01 PQ: 0 ANSI: 0
[ 5291.523804] scsi 8:0:0:2: Direct-Access ZTE Corp TF Card Reader 0.01 PQ: 0 ANSI: 0
[ 5291.552726] sr2: scsi3-mmc drive: 52x/52x cd/rw tray
[ 5291.552797] sr 8:0:0:0: Attached scsi CD-ROM sr2
[ 5291.552842] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 5291.572705] sd 8:0:0:1: [sdc] 124488 512-byte hardware sectors (64 MB)
[ 5291.580695] sd 8:0:0:1: [sdc] Write Protect is off
[ 5291.580702] sd 8:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 5291.580704] sd 8:0:0:1: [sdc] Assuming drive cache: write through
[ 5291.589669] sd 8:0:0:1: [sdc] 124488 512-byte hardware sectors (64 MB)
[ 5291.592653] sd 8:0:0:1: [sdc] Write Protect is off
[ 5291.592658] sd 8:0:0:1: [sdc] Mode Sense: 03 00 00 00
[ 5291.592661] sd 8:0:0:1: [sdc] Assuming drive cache: write through
[ 5291.592668] sdc: unknown partition table
[ 5291.631761] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[ 5291.631812] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 5291.636640] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[ 5291.636699] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 5293.406543] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5293.416544] ISOFS: changing to secondary root

复制代码

Anyone any idea why the modem doesn't show up as /dev/ttyUSBx? What did I miss or do wrong?

richrat · 发表于 2009-10-26 13:06:53

谢谢楼主，做个标记。

fengchu2087 · 发表于 2010-1-2 16:53:05

请教各位这个方法可以用在mac系统上吗
linux 和mac都通用吗？
有人试过没有呢？？
谢谢了

danielliu · 发表于 2010-1-10 14:07:43

Post by bossel;2038848
Thanks for your explanation on ZTE MU350, Daniel. Tried it (in combination with info from linuxren) on ZTE MU351, but I run into one major problem. The modem doesn't appear.

The details:

Kubuntu 8.04 on HP

Modem Location:

UHCI Host Controller (3)

Linux 2.6.24-24-generic uhci_hcd

serial no.: 0000:00:1d.2

class: 9 (hub)

subclass: 0 (unused)

protocol: 0 (full speed (or root) hub)
复制代码

lsusb shows:

Bus 003 Device 002: ID 19d2:0003
复制代码

run modeswitch:

Reading config file: /etc/usb_modeswitch.conf

DefaultVendor=  0x19d2

DefaultProduct= 0x0003

TargetVendor= not set

TargetProduct=  not set

TargetClass= not set

DetachStorageOnly=0

HuaweiMode=0

SierraMode=0

SonyMode=0

MessageEndpoint= not set

MessageContent="5553424312345678000000000000061b000000020000000000000000000000"

NeedResponse=0

ResponseEndpoint= not set

Interface=0x00

InquireDevice enabled (default)

Success check disabled

usb_set_debug: Setting debugging level to 15 (on)

usb_os_find_busses: Found 005

usb_os_find_busses: Found 004

usb_os_find_busses: Found 003

usb_os_find_busses: Found 002

usb_os_find_busses: Found 001

usb_os_find_devices: Found 001 on 005

usb_os_find_devices: Found 001 on 004

usb_os_find_devices: Found 002 on 003

usb_os_find_devices: Found 001 on 003

error obtaining child information: Inappropriate ioctl for device

usb_os_find_devices: Found 005 on 002

usb_os_find_devices: Found 004 on 002

skipped 1 class/vendor specific interface descriptors

usb_os_find_devices: Found 003 on 002

usb_os_find_devices: Found 001 on 002

error obtaining child information: Inappropriate ioctl for device

error obtaining child information: Inappropriate ioctl for device

usb_os_find_devices: Found 001 on 001

Looking for default devices ...

Found default devices (1)

Accessing device 002 on bus 003 ...

Using endpoints 0x04 (out) and 0x84 (in)

Inquiring device details; driver will be detached ...

Looking for active driver ...

OK, driver found ("usb-storage")

OK, driver "usb-storage" detached

Received inquiry data (detailed identification)

-------------------------

  Vendor String: ZTE Corp

Product String: CD-ROM

Revision String: 0.01

-------------------------

Device description data (identification)

-------------------------

Manufacturer: ZTE Corp

   Product: TD-SCDMA USB Modem

  Serial No.: 000000000000

-------------------------

Setting up communication with interface 0 ...

Trying to send the message to endpoint 0x04 ...

OK, message successfully sent

-> Run lsusb to note any changes. Bye.
复制代码

lsusb after:

Bus 003 Device 003: ID 19d2:0003
复制代码

run wvdial:

--> WvDial: Internet dialer version 1.60

--> Cannot open / dev/ttyUSB2: No such file or directory

--> Cannot open / dev/ttyUSB2: No such file or directory

--> Cannot open / dev/ttyUSB2: No such file or directory
复制代码

after modeswitch Dolphin shows:

scd1 eWalk_ZTE

scd2 eWalk_ZTE

63MB Removable Media
复制代码

.hal-mtab shows:

/dev/scd1 1000 0 iso9660 nosuid,nodev,uhelper=hal,uid=1000,noatime,utf8 /media/eWalk_ZTE

/dev/scd2 1000 0 iso9660 nosuid,nodev,uhelper=hal,uid=1000,noatime,utf8 /media/eWalk_ZTE-1

/dev/sdc 1000 0 vfat nosuid,nodev,uhelper=hal,flush,uid=1000,noatime,utf8,shortname=lower /media/disk
复制代码

dmesg shows:

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Tue Aug 18 17:04:53 UTC 2009 (Ubuntu 2.6.24-24.59-generic)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000]  BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)

[ 0.000000]  BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)

[ 0.000000]  BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)

[ 0.000000]  BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)

[ 0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)

[ 0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)

[ 0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)

[ 0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[ 0.000000] 119MB HIGHMEM available.

[ 0.000000] 896MB LOWMEM available.

[ 0.000000] Entering add_active_range(0, 0, 260048) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA          0 ->    4096

[ 0.000000] Normal    4096 -> 229376

[ 0.000000] HighMem 229376 -> 260048

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000]    0:       0 -> 260048

[ 0.000000] On node 0 totalpages: 260048

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 1760 pages used for memmap

[ 0.000000] Normal zone: 223520 pages, LIFO batch:31

[ 0.000000] HighMem zone: 239 pages used for memmap

[ 0.000000] HighMem zone: 30433 pages, LIFO batch:7

[ 0.000000] Movable zone: 0 pages used for memmap

[ 0.000000] DMI 2.4 present.

[ 0.000000] ACPI: RSDP signature @ 0xC00F7B60 checksum 0

[ 0.000000] ACPI: RSDP 000F7B60, 0024 (r2 HP )

[ 0.000000] ACPI: XSDT 3F7E57C4, 0074 (r1 HPQOEM SLIC-MPC       1 HP       1)

[ 0.000000] ACPI: FACP 3F7E5684, 00F4 (r4 HP    30A2          3 HP       1)

[ 0.000000] ACPI: DSDT 3F7E5AC0, F9A0 (r1 HP    nx7400 10000 MSFT  100000E)

[ 0.000000] ACPI: FACS 3F7F7E80, 0040

[ 0.000000] ACPI: SLIC 3F7E5838, 0176 (r1 HPQOEM SLIC-MPC       1 HP       1)

[ 0.000000] ACPI: HPET 3F7E59B0, 0038 (r1 HP    30A2          1 HP       1)

[ 0.000000] ACPI: APIC 3F7E59E8, 0068 (r1 HP    30A2          1 HP       1)

[ 0.000000] ACPI: MCFG 3F7E5A50, 003C (r1 HP    30A2          1 HP       1)

[ 0.000000] ACPI: TCPA 3F7E5A8C, 0032 (r2 HP    30A2          1 HP       1)

[ 0.000000] ACPI: SSDT 3F7F5460, 0326 (r1 HP    HPQSAT       1 MSFT  100000E)

[ 0.000000] ACPI: SSDT 3F7F5786, 04CB (r1 HP    Cpu0Cst    3001 INTL 20060317)

[ 0.000000] ACPI: SSDT 3F7F5C51, 025F (r1 HP    Cpu0Tst    3000 INTL 20060317)

[ 0.000000] ACPI: SSDT 3F7F5EB0, 04D7 (r1 HP       CpuPm    3000 INTL 20060317)

[ 0.000000] ACPI: DMI detected: Hewlett-Packard

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 6:14 APIC version 20

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)

[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258017

[ 0.000000] Kernel command line: root=UUID=8f73303f-b576-4968-b3eb-c04a78453265 ro quiet splash

[ 0.000000] mapped APIC to ffffb000 (fee00000)

[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[ 0.000000] Detected 1862.052 MHz processor.

[ 13.528974] Console: colour VGA+ 80x25

[ 13.528978] console [tty0] enabled

[ 13.529268] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 13.529662] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 13.557829] Memory: 1018652k/1040192k available (2181k kernel code, 20788k reserved, 1006k data, 368k init, 122688k highmem)

[ 13.557837] virtual kernel memory layout:

[ 13.557838]    fixmap  : 0xfff4b000 - 0xfffff000 ( 720 kB)

[ 13.557839]    pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 13.557840]    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)

[ 13.557841]    lowmem  : 0xc0000000 - 0xf8000000 ( 896 MB)

[ 13.557842]    .init : 0xc0423000 - 0xc047f000 ( 368 kB)

[ 13.557844]    .data : 0xc0321548 - 0xc041cdc4 (1006 kB)

[ 13.557845]    .text : 0xc0100000 - 0xc0321548 (2181 kB)

[ 13.557848] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[ 13.557888] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

[ 13.558028] hpet clockevent registered

[ 13.637897] Calibrating delay using timer specific routine.. 3728.22 BogoMIPS (lpj=7456444)

[ 13.637922] Security Framework initialized

[ 13.637932] SELinux:  Disabled at boot.

[ 13.637948] AppArmor: AppArmor initialized

[ 13.637952] Failure registering capabilities with primary security module.

[ 13.637960] Mount-cache hash table entries: 512

[ 13.638090] Initializing cgroup subsys ns

[ 13.638098] Initializing cgroup subsys cpuacct

[ 13.638110] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 00000000

[ 13.638117] monitor/mwait feature present.

[ 13.638118] using mwait in idle threads.

[ 13.638122] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 13.638125] CPU: L2 cache: 1024K

[ 13.638129] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042940 0000c109 00000000 00000000 00000000

[ 13.638140] Compat vDSO mapped to ffffe000.

[ 13.638154] Checking 'hlt' instruction... OK.

[ 13.654292] SMP alternatives: switching to UP code

[ 13.656042] Freeing SMP alternatives: 11k freed

[ 13.656157] Early unpacking initramfs... done

[ 13.998990] ACPI: Core revision 20070126

[ 13.999105] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[ 14.074571] CPU0: Intel(R) Celeron(R) M CPU       440  @ 1.86GHz stepping 0c

[ 14.074588] Total of 1 processors activated (3728.22 BogoMIPS).

[ 14.074783] ENABLING IO-APIC IRQs

[ 14.074976] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 14.220931] Brought up 1 CPUs

[ 14.220955] CPU0 attaching sched-domain:

[ 14.220957]  domain 0: span 01

[ 14.220959] groups: 01

[ 14.221122] net_namespace: 64 bytes

[ 14.221131] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.

[ 14.221136] Booting paravirtualized kernel on bare hardware

[ 14.221567] Time: 18:59:40  Date: 10/21/09

[ 14.221590] NET: Registered protocol family 16

[ 14.221775] EISA bus registered

[ 14.221780] ACPI: bus type pci registered

[ 14.223076] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32

[ 14.223078] PCI: Using configuration type 1

[ 14.223092] Setting up standard PCI resources

[ 14.224945] ACPI: EC: Look up EC in DSDT

[ 14.226087] ACPI: EC: non-query interrupt received, switching to interrupt mode

[ 14.260596] ACPI: Interpreter enabled

[ 14.260599] ACPI: (supports S0 S3 S4 S5)

[ 14.260610] ACPI: Using IOAPIC for interrupt routing

[ 14.269733] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62

[ 14.269736] ACPI: EC: driver started in interrupt mode

[ 14.269800] ACPI: PCI Root Bridge [C002] (0000:00)

[ 14.270607] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO

[ 14.270612] PCI quirk: region 1100-113f claimed by ICH6 GPIO

[ 14.271417] PCI: Transparent bridge - 0000:00:1e.0

[ 14.271508] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]

[ 14.271844] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]

[ 14.272000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C104._PRT]

[ 14.272137] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C114._PRT]

[ 14.272275] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C11A._PRT]

[ 14.309216] ACPI: PCI Interrupt Link [C110] (IRQs *10 11)

[ 14.309433] ACPI: PCI Interrupt Link [C111] (IRQs *10 11)

[ 14.309648] ACPI: PCI Interrupt Link [C112] (IRQs 10 *11)

[ 14.309862] ACPI: PCI Interrupt Link [C113] (IRQs *10 11)

[ 14.310075] ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)

[ 14.310281] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.

[ 14.310489] ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.

[ 14.310592] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]

[ 14.310782] ACPI: Power Resource [C21D] (on)

[ 14.310833] ACPI: Power Resource [C226] (off)

[ 14.310940] ACPI: Power Resource [C320] (off)

[ 14.311042] ACPI: Power Resource [C321] (off)

[ 14.311144] ACPI: Power Resource [C322] (off)

[ 14.311247] ACPI: Power Resource [C323] (off)

[ 14.311298] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 14.311329] pnp: PnP ACPI init

[ 14.311336] ACPI: bus type pnp registered

[ 14.318818] pnp: PnP ACPI: found 12 devices

[ 14.318820] ACPI: ACPI bus type pnp unregistered

[ 14.318825] PnPBIOS: Disabled by ACPI PNP

[ 14.319032] PCI: Using ACPI for IRQ routing

[ 14.319036] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[ 14.440514] NET: Registered protocol family 8

[ 14.440517] NET: Registered protocol family 20

[ 14.440552] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 14.440556] hpet0: 3 64-bit timers, 14318180 Hz

[ 14.441597] AppArmor: AppArmor Filesystem Enabled

[ 14.444499] Time: tsc clocksource has been installed.

[ 14.444516] Switched to high resolution mode on CPU 0

[ 14.452478] system 00:00: iomem range 0x0-0x9ffff could not be reserved

[ 14.452481] system 00:00: iomem range 0xe0000-0xfffff could not be reserved

[ 14.452484] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved

[ 14.452494] system 00:09: ioport range 0x500-0x57f has been reserved

[ 14.452497] system 00:09: ioport range 0x800-0x80f has been reserved

[ 14.452500] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved

[ 14.452503] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved

[ 14.452508] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved

[ 14.452511] system 00:0a: ioport range 0x1000-0x107f has been reserved

[ 14.452513] system 00:0a: ioport range 0x1100-0x113f has been reserved

[ 14.452516] system 00:0a: ioport range 0x1200-0x121f has been reserved

[ 14.452519] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved

[ 14.452522] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved

[ 14.452525] system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved

[ 14.452528] system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved

[ 14.452531] system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved

[ 14.452536] system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved

[ 14.452539] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved

[ 14.482890] PCI: Bridge: 0000:00:1c.0

[ 14.482892] IO window: disabled.

[ 14.482898] MEM window: disabled.

[ 14.482902] PREFETCH window: disabled.

[ 14.482908] PCI: Bridge: 0000:00:1c.1

[ 14.482909] IO window: disabled.

[ 14.482915] MEM window: f4000000-f40fffff

[ 14.482919] PREFETCH window: disabled.

[ 14.482925] PCI: Bridge: 0000:00:1c.3

[ 14.482927] IO window: 2000-3fff

[ 14.482933] MEM window: f0000000-f3ffffff

[ 14.482937] PREFETCH window: disabled.

[ 14.482948] PCI: Bus 3, cardbus bridge: 0000:02:06.0

[ 14.482950] IO window: 00001400-000014ff

[ 14.482955] IO window: 00001800-000018ff

[ 14.482960] PREFETCH window: 40000000-43ffffff

[ 14.482965] MEM window: 44000000-47ffffff

[ 14.482969] PCI: Bridge: 0000:00:1e.0

[ 14.482971] IO window: disabled.

[ 14.482976] MEM window: f4100000-f43fffff

[ 14.482980] PREFETCH window: disabled.

[ 14.483014] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 14.483021] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 14.483045] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17

[ 14.483051] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[ 14.483074] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18

[ 14.483079] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 14.483093] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[ 14.483111] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19

[ 14.483125] NET: Registered protocol family 2

[ 14.520387] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 14.520608] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 14.521449] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 14.521933] TCP: Hash tables configured (established 131072 bind 65536)

[ 14.521937] TCP reno registered

[ 14.532473] checking if image is initramfs... it is

[ 15.205062] Freeing initrd memory: 7709k freed

[ 15.205725] audit: initializing netlink socket (disabled)

[ 15.205738] audit(1256151580.472:1): initialized

[ 15.205899] highmem bounce pool size: 64 pages

[ 15.207675] VFS: Disk quotas dquot_6.5.1

[ 15.207744] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 15.207878] io scheduler noop registered

[ 15.207881] io scheduler anticipatory registered

[ 15.207883] io scheduler deadline registered

[ 15.207894] io scheduler cfq registered (default)

[ 15.207905] Boot video device is 0000:00:02.0

[ 15.208101] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 15.208158] assign_interrupt_mode Found MSI capability

[ 15.208206] Allocate Port Service[0000:00:1c.0:pcie00]

[ 15.208241] Allocate Port Service[0000:00:1c.0:pcie02]

[ 15.208339] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[ 15.208395] assign_interrupt_mode Found MSI capability

[ 15.208439] Allocate Port Service[0000:00:1c.1:pcie00]

[ 15.208469] Allocate Port Service[0000:00:1c.1:pcie02]

[ 15.208566] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 15.208622] assign_interrupt_mode Found MSI capability

[ 15.208666] Allocate Port Service[0000:00:1c.3:pcie00]

[ 15.208702] Allocate Port Service[0000:00:1c.3:pcie02]

[ 15.208936] isapnp: Scanning for PnP cards...

[ 15.562577] isapnp: No Plug & Play device found

[ 15.588998] Real Time Clock Driver v1.12ac

[ 15.589258] hpet_resources: 0xfed00000 is busy

[ 15.589309] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 15.590499] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 15.590563] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 15.590656] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12

[ 15.592457] i8042.c: Detected active multiplexing controller, rev 1.1.

[ 15.593207] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 15.593211] serio: i8042 AUX0 port at 0x60,0x64 irq 12

[ 15.593214] serio: i8042 AUX1 port at 0x60,0x64 irq 12

[ 15.593216] serio: i8042 AUX2 port at 0x60,0x64 irq 12

[ 15.593218] serio: i8042 AUX3 port at 0x60,0x64 irq 12

[ 15.594704] mice: PS/2 mouse device common for all mice

[ 15.594812] EISA: Probing bus 0 at eisa.0

[ 15.594819] Cannot allocate resource for EISA slot 1

[ 15.594821] Cannot allocate resource for EISA slot 2

[ 15.594823] Cannot allocate resource for EISA slot 3

[ 15.594825] Cannot allocate resource for EISA slot 4

[ 15.594843] EISA: Detected 0 cards.

[ 15.594846] cpuidle: using governor ladder

[ 15.594848] cpuidle: using governor menu

[ 15.594934] NET: Registered protocol family 1

[ 15.594960] Using IPI No-Shortcut mode

[ 15.594992] registered taskstats version 1

[ 15.595090] Magic number: 13:953:999

[ 15.595104] hash matches device ttyaf

[ 15.595191] hash matches device 00:01

[ 15.595192] hash matches device pnp0

[ 15.595218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 15.595220] EDD information not available.

[ 15.595398] Freeing unused kernel memory: 368k freed

[ 15.595422] Write protecting the kernel read-only data: 802k

[ 15.622453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 16.807927] fuse init (API version 7.9)

[ 16.820061] ACPI: Transitioning device [C324] to D3

[ 16.820064] ACPI: Transitioning device [C324] to D3

[ 16.820068] ACPI: Fan [C324] (off)

[ 16.820266] ACPI: Transitioning device [C325] to D3

[ 16.820268] ACPI: Transitioning device [C325] to D3

[ 16.820270] ACPI: Fan [C325] (off)

[ 16.820482] ACPI: Transitioning device [C326] to D3

[ 16.820484] ACPI: Transitioning device [C326] to D3

[ 16.820487] ACPI: Fan [C326] (off)

[ 16.820682] ACPI: Transitioning device [C327] to D3

[ 16.820684] ACPI: Transitioning device [C327] to D3

[ 16.820689] ACPI: Fan [C327] (off)

[ 16.832488] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

[ 16.832494] ACPI: Processor [CPU0] (supports 8 throttling states)

[ 16.832509] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]

[ 16.850723] ACPI: Thermal Zone [TZ0] (38 C)

[ 16.865274] ACPI: Thermal Zone [TZ1] (39 C)

[ 16.879958] ACPI: Thermal Zone [TZ2] (30 C)

[ 16.882351] ACPI: Thermal Zone [TZ3] (29 C)

[ 16.883192] ACPI: Thermal Zone [TZ4] (65 C)

[ 17.612877] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17

[ 17.612891] PCI: Setting latency timer of device 0000:10:00.0 to 64

[ 17.634937] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)

[ 17.634950] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)

[ 17.634959] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)

[ 17.634968] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)

[ 17.638992] usbcore: registered new interface driver usbfs

[ 17.639017] usbcore: registered new interface driver hub

[ 17.650914] usbcore: registered new device driver usb

[ 17.662839] USB Universal Host Controller Interface driver v3.0

[ 17.674920] ssb: Sonics Silicon Backplane found on PCI device 0000:10:00.0

[ 17.675192] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20

[ 17.675204] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[ 17.675208] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 17.675493] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

[ 17.675529] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020

[ 17.675667] usb usb1: configuration #1 chosen from 1 choice

[ 17.675689] hub 1-0:1.0: USB hub found

[ 17.675694] hub 1-0:1.0: 2 ports detected

[ 17.781814] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17

[ 17.781828] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[ 17.781832] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 17.781855] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

[ 17.781892] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040

[ 17.781997] usb usb2: configuration #1 chosen from 1 choice

[ 17.782019] hub 2-0:1.0: USB hub found

[ 17.782025] hub 2-0:1.0: 2 ports detected

[ 17.788500] SCSI subsystem initialized

[ 17.842550] libata version 3.00 loaded.

[ 17.882591] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19

[ 17.882605] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[ 17.882610] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 17.882632] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

[ 17.882668] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060

[ 17.882775] usb usb3: configuration #1 chosen from 1 choice

[ 17.882803] hub 3-0:1.0: USB hub found

[ 17.882808] hub 3-0:1.0: 2 ports detected

[ 17.986417] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18

[ 17.986431] PCI: Setting latency timer of device 0000:00:1d.3 to 64

[ 17.986436] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 17.986460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

[ 17.986495] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080

[ 17.986605] usb usb4: configuration #1 chosen from 1 choice

[ 17.986628] hub 4-0:1.0: USB hub found

[ 17.986633] hub 4-0:1.0: 2 ports detected

[ 18.090321] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20

[ 18.090337] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[ 18.090341] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 18.090370] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

[ 18.094264] ehci_hcd 0000:00:1d.7: debug port 1

[ 18.094271] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[ 18.094278] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000

[ 18.122063] usb 2-2: new full speed USB device using uhci_hcd and address 2

[ 18.134037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 18.134172] usb usb5: configuration #1 chosen from 1 choice

[ 18.134196] hub 5-0:1.0: USB hub found

[ 18.134203] hub 5-0:1.0: 8 ports detected

[ 18.238079] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 18.257855] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)

[ 18.257864] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)

[ 18.257871] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)

[ 18.297830] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0

[ 18.297856] b44.c:v2.0

[ 18.297905] ACPI: PCI Interrupt 0000:02:06.1[b] -> GSI 19 (level, low) -> IRQ 18

[ 18.347605] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f4101000-f41017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]

[ 18.350886] ahci 0000:00:1f.2: version 3.0

[ 18.350916] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17

[ 18.350965] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports

[ 18.350968] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf

[ 18.357969] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:e5:b0:ed

[ 18.724996] Clocksource tsc unstable (delta = -606004738 ns)

[ 18.729251] Time: hpet clocksource has been installed.

[ 18.757697] usb 2-2: new full speed USB device using uhci_hcd and address 3

[ 18.785253] usb 2-2: configuration #1 chosen from 1 choice

[ 18.787347] hub 2-2:1.0: USB hub found

[ 18.789309] hub 2-2:1.0: 4 ports detected

[ 18.920540] usb 2-2.2: new low speed USB device using uhci_hcd and address 4

[ 18.954909] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode

[ 18.954913] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part

[ 18.954920] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 18.955177] scsi0 : ahci

[ 18.955425] scsi1 : ahci

[ 18.955555] scsi2 : ahci

[ 18.955682] scsi3 : ahci

[ 18.955743] ata1: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 220

[ 18.955747] ata2: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585180 irq 220

[ 18.955751] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585200 irq 220

[ 18.955755] ata4: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585280 irq 220

[ 18.980147] usb 2-2.2: configuration #1 chosen from 1 choice

[ 19.074342] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f9929bd210e]

[ 19.079962] usb 2-2.4: new full speed USB device using uhci_hcd and address 5

[ 19.127482] usb 2-2.4: not running at top speed; connect to a high speed hub

[ 19.132739] usb 2-2.4: configuration #1 chosen from 1 choice

[ 19.134511] usbcore: registered new interface driver hiddev

[ 19.148489] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input2

[ 19.150453] input,hidraw0: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-2.2

[ 19.150473] usbcore: registered new interface driver usbhid

[ 19.150477] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[ 19.151309] usbcore: registered new interface driver libusual

[ 19.162454] Initializing USB Mass Storage driver...

[ 19.166645] scsi4 : SCSI emulation for USB Mass Storage devices

[ 19.167104] usbcore: registered new interface driver usb-storage

[ 19.167108] USB Mass Storage support registered.

[ 19.167190] usb-storage: device found at 5

[ 19.167192] usb-storage: waiting for device to settle before scanning

[ 19.203154] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 19.205473] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out

[ 19.205477] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out

[ 19.205540] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded

[ 19.205907] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded

[ 19.206669] ata1.00: ATA-7: ST980811AS, 3.BHD, max UDMA/100

[ 19.206671] ata1.00: 156301488 sectors, multi 16: LBA48

[ 19.209091] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out

[ 19.209094] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out

[ 19.209164] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded

[ 19.209529] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded

[ 19.210307] ata1.00: configured for UDMA/100

[ 19.212097] ata1.00: configured for UDMA/100

[ 19.212100] ata1: EH complete

[ 19.255010] ata2: SATA link down (SStatus 0 SControl 0)

[ 19.297624] ata3: SATA link down (SStatus 0 SControl 0)

[ 19.340114] ata4: SATA link down (SStatus 0 SControl 0)

[ 19.340235] scsi 0:0:0:0: Direct-Access    ATA    ST980811AS    3.BH PQ: 0 ANSI: 5

[ 19.341143] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16

[ 19.341180] PCI: Setting latency timer of device 0000:00:1f.1 to 64

[ 19.341194] ACPI: PCI interrupt for device 0000:00:1f.1 disabled

[ 19.346701] ata_piix 0000:00:1f.1: version 2.12

[ 19.346720] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16

[ 19.346755] PCI: Setting latency timer of device 0000:00:1f.1 to 64

[ 19.347111] scsi5 : ata_piix

[ 19.347440] scsi6 : ata_piix

[ 19.347930] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14

[ 19.347933] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15

[ 19.353815] Driver 'sd' needs updating - please use bus_type methods

[ 19.356111] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

[ 19.356124] sd 0:0:0:0: [sda] Write Protect is off

[ 19.356127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 19.356144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.356196] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)

[ 19.356205] sd 0:0:0:0: [sda] Write Protect is off

[ 19.356208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 19.356223] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.356226]  sda: sda1 sda3 < sda5 sda6 sda7 >

[ 19.427029] sd 0:0:0:0: [sda] Attached SCSI disk

[ 19.432946] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 19.667992] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2

[ 19.827120] ata5.00: configured for MWDMA2

[ 19.827175] ata6: port disabled. ignoring.

[ 19.829511] scsi 5:0:0:0: CD-ROM          HL-DT-ST DVDRAM GSA-T10N  PC05 PQ: 0 ANSI: 5

[ 19.829587] scsi 5:0:0:0: Attached scsi generic sg1 type 5

[ 19.837676] Driver 'sr' needs updating - please use bus_type methods

[ 19.844238] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 19.844243] Uniform CD-ROM driver Revision: 3.20

[ 19.844288] sr 5:0:0:0: Attached scsi CD-ROM sr0

[ 19.914798] Attempting manual resume

[ 19.914801] swsusp: Resume From Partition 8:7

[ 19.914803] PM: Checking swsusp image.

[ 19.914905] PM: Resume from disk failed.

[ 19.959990] kjournald starting.  Commit interval 5 seconds

[ 19.960001] EXT3-fs: mounted filesystem with ordered data mode.

[ 23.157182] usb-storage: device scan complete

[ 23.160166] scsi 4:0:0:0: Direct-Access    Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2

[ 23.165138] sd 4:0:0:0: [sdb] 7856128 512-byte hardware sectors (4022 MB)

[ 23.168131] sd 4:0:0:0: [sdb] Write Protect is off

[ 23.168134] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00

[ 23.168136] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[ 23.180112] sd 4:0:0:0: [sdb] 7856128 512-byte hardware sectors (4022 MB)

[ 23.183105] sd 4:0:0:0: [sdb] Write Protect is off

[ 23.183107] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00

[ 23.183109] sd 4:0:0:0: [sdb] Assuming drive cache: write through

[ 23.183113]  sdb: sdb1

[ 23.323931] sd 4:0:0:0: [sdb] Attached SCSI removable disk

[ 23.323965] sd 4:0:0:0: Attached scsi generic sg2 type 0

[ 34.999823] Linux agpgart interface v0.102

[ 35.071654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 35.115645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 35.291290] agpgart: Detected an Intel 945GM Chipset.

[ 35.291581] agpgart: Detected 7932K stolen memory.

[ 35.308178] agpgart: AGP aperture is 256M @ 0xe0000000

[ 35.791431] input: Power Button (FF) as /devices/virtual/input/input3

[ 35.806319] ACPI: Power Button (FF) [PWRF]

[ 35.806446] input: Sleep Button (CM) as /devices/virtual/input/input4

[ 35.822267] ACPI: Sleep Button (CM) [C243]

[ 35.822349] input: Lid Switch as /devices/virtual/input/input5

[ 35.822462] ACPI: Lid Switch [C23C]

[ 35.922519] ACPI: AC Adapter [C1BC] (on-line)

[ 36.148896] ACPI: Battery Slot [C1BE] (battery present)

[ 36.149106] ACPI: Battery Slot [C1BD] (battery absent)

[ 36.149581] ACPI: WMI-Acer: Mapper loaded

[ 36.205622] ieee80211_crypt: registered algorithm 'NULL'

[ 36.210050] wl: module license 'MIXED/Proprietary' taints kernel.

[ 37.216849] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6

[ 37.231767] ACPI: Video Device [C085] (multi-head: yes  rom: no  post: no)

[ 37.810086] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 37.810119] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[ 38.393199] b43-phy0: Broadcom 4311 WLAN found

[ 38.433617] b43-phy0 debug: Found PHY: Analog 4, Type 2, Revision 8

[ 38.433640] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2

[ 38.486461] phy0: Selected rate control algorithm 'simple'

[ 38.609491] iTCO_vendor_support: vendor-support=0

[ 38.625638] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[ 38.625734] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)

[ 38.625771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 38.724091] intel_rng: FWH not detected

[ 38.998116] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]

[ 38.998139] Yenta: Enabling burst memory read transactions

[ 38.998145] Yenta: Using INTVAL to route CSC interrupts to PCI

[ 38.998147] Yenta: Routing CardBus interrupts to PCI

[ 38.998153] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64

[ 39.229032] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19

[ 39.229037] Socket status: 30000006

[ 39.229040] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06

[ 39.229045] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff

[ 39.408047] input: PC Speaker as /devices/platform/pcspkr/input/input7

[ 40.371075] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000

[ 40.371082] serio: Synaptics pass-through port at isa0060/serio4/input0

[ 40.410477] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8

[ 41.679963] cs: IO port probe 0x100-0x3af: clean.

[ 41.681981] cs: IO port probe 0x3e0-0x4ff: clean.

[ 41.682812] cs: IO port probe 0x820-0x8ff: clean.

[ 41.683498] cs: IO port probe 0xc00-0xcf7: clean.

[ 41.684344] cs: IO port probe 0xa00-0xaff: clean.

[ 41.838752] lp: driver loaded but no devices found

[ 42.116930] Adding 1020088k swap on /dev/sda7.  Priority:-1 extents:1 across:1020088k

[ 42.525062] EXT3 FS on sda6, internal journal

[ 42.683441] device-mapper: uevent: version 1.0.3

[ 42.683471] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com

[ 44.006630] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 44.359453] PPP generic driver version 2.4.2

[ 44.416493] NET: Registered protocol family 17

[ 44.482381] NET: Registered protocol family 10

[ 44.482603] lo: Disabled Privacy Extensions

[ 44.483868] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 45.367976] No dock devices found.

[ 47.058412] apm: BIOS not found.

[ 47.747902] ppdev: user-space parallel port driver

[ 48.069493] audit(1256122818.584:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5581 profile="/usr/sbin/cupsd" namespace="default"

[ 49.164005] [drm] Initialized drm 1.1.0 20060810

[ 49.187953] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 49.187964] PCI: Setting latency timer of device 0000:00:02.0 to 64

[ 49.188046] [drm] Initialized i915 1.6.0 20060119 on minor 0

[ 52.338306] vboxdrv: Trying to deactivate the NMI watchdog permanently...

[ 52.338312] vboxdrv: Successfully done.

[ 52.338314] vboxdrv: Found 1 processor cores.

[ 52.338316] vboxdrv: fAsync=0 u64DiffCores=1.

[ 52.338360] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[ 52.338363] vboxdrv: Successfully loaded version 1.6.0 (interface 0x00070001).

[ 54.396532] input: b43-phy0 as /devices/virtual/input/input9

[ 54.848804] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)

[ 54.851055] Bluetooth: Core ver 2.11

[ 54.851689] NET: Registered protocol family 31

[ 54.851693] Bluetooth: HCI device and connection manager initialized

[ 54.851697] Bluetooth: HCI socket layer initialized

[ 54.927408] Bluetooth: L2CAP ver 2.9

[ 54.927413] Bluetooth: L2CAP socket layer initialized

[ 55.015650] Bluetooth: RFCOMM socket layer initialized

[ 55.015666] Bluetooth: RFCOMM TTY layer initialized

[ 55.015668] Bluetooth: RFCOMM ver 1.8

[ 56.283102] b43-phy0 debug: Chip initialized

[ 56.283297] b43-phy0 debug: 32-bit DMA initialized

[ 56.302920] Registered led device: b43-phy0:tx

[ 56.302940] Registered led device: b43-phy0:rx

[ 56.302958] Registered led device: b43-phy0:radio

[ 56.302995] b43-phy0 debug: Wireless interface started

[ 56.302999] b43-phy0 debug: Adding Interface type 2

[ 56.305550] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 3323.359155] usb 3-2: new full speed USB device using uhci_hcd and address 2

[ 3323.478940] usb 3-2: device descriptor read/64, error -71

[ 3323.745685] usb 3-2: configuration #1 chosen from 1 choice

[ 3323.830416] scsi7 : SCSI emulation for USB Mass Storage devices

[ 3323.882282] usb-storage: device found at 2

[ 3323.882287] usb-storage: waiting for device to settle before scanning

[ 3328.874761] usb-storage: device scan complete

[ 3328.877751] scsi 7:0:0:0: CD-ROM          ZTE Corp CD-ROM          0.01 PQ: 0 ANSI: 0

[ 3328.934747] sr1: scsi3-mmc drive: 52x/52x cd/rw tray

[ 3328.934815] sr 7:0:0:0: Attached scsi CD-ROM sr1

[ 3328.934863] sr 7:0:0:0: Attached scsi generic sg3 type 5

[ 3335.861703] ISO 9660 Extensions: Microsoft Joliet Level 3

[ 3335.871687] ISOFS: changing to secondary root

[ 5285.848294] usb 3-2: USB disconnect, address 2

[ 5286.087775] usb 3-2: new full speed USB device using uhci_hcd and address 3

[ 5286.207536] usb 3-2: device descriptor read/64, error -71

[ 5286.475578] usb 3-2: configuration #1 chosen from 1 choice

[ 5286.506121] scsi8 : SCSI emulation for USB Mass Storage devices

[ 5286.520372] usb-storage: device found at 3

[ 5286.520377] usb-storage: waiting for device to settle before scanning

[ 5291.511827] usb-storage: device scan complete

[ 5291.514808] scsi 8:0:0:0: CD-ROM          ZTE Corp CD-ROM          0.01 PQ: 0 ANSI: 0

[ 5291.520819] scsi 8:0:0:1: Direct-Access    ZTE Corp Flash Disk    0.01 PQ: 0 ANSI: 0

[ 5291.523804] scsi 8:0:0:2: Direct-Access    ZTE Corp TF Card Reader 0.01 PQ: 0 ANSI: 0

[ 5291.552726] sr2: scsi3-mmc drive: 52x/52x cd/rw tray

[ 5291.552797] sr 8:0:0:0: Attached scsi CD-ROM sr2

[ 5291.552842] sr 8:0:0:0: Attached scsi generic sg3 type 5

[ 5291.572705] sd 8:0:0:1: [sdc] 124488 512-byte hardware sectors (64 MB)

[ 5291.580695] sd 8:0:0:1: [sdc] Write Protect is off

[ 5291.580702] sd 8:0:0:1: [sdc] Mode Sense: 03 00 00 00

[ 5291.580704] sd 8:0:0:1: [sdc] Assuming drive cache: write through

[ 5291.589669] sd 8:0:0:1: [sdc] 124488 512-byte hardware sectors (64 MB)

[ 5291.592653] sd 8:0:0:1: [sdc] Write Protect is off

[ 5291.592658] sd 8:0:0:1: [sdc] Mode Sense: 03 00 00 00

[ 5291.592661] sd 8:0:0:1: [sdc] Assuming drive cache: write through

[ 5291.592668]  sdc: unknown partition table

[ 5291.631761] sd 8:0:0:1: [sdc] Attached SCSI removable disk

[ 5291.631812] sd 8:0:0:1: Attached scsi generic sg4 type 0

[ 5291.636640] sd 8:0:0:2: [sdd] Attached SCSI removable disk

[ 5291.636699] sd 8:0:0:2: Attached scsi generic sg5 type 0

[ 5293.406543] ISO 9660 Extensions: Microsoft Joliet Level 3

[ 5293.416544] ISOFS: changing to secondary root
复制代码

Anyone any idea why the modem doesn't show up as /dev/ttyUSBx? What did I miss or do wrong?

daniel@T41 / $ cat /etc/udev/rules.d/50-zte-mu350.rules
# /etc/udev/rules.d/50-zte-mu350.rules
ACTION=="add", SUBSYSTEM=="usb", DRIVERS=="usb", ATTR{idVendor}=="19d2", ATTR{idProduct}=="0003", \
RUN+="/usr/sbin/usb_modeswitch -v %s{idVendor} -p %s{idProduct} -M 5553424312345678000000000000061b000000020000000000000000000000 -R 1"
# 卸载自动加载成硬盘
SUBSYSTEM=="usb", SYSFS{idProduct}=="0003", SYSFS{idVendor}=="19d2", RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x0003"
#将MU350转换成串口modem

daniel@T41 / $ eix udev -I
sys-fs/udev
   Available versions:  114 115-r1 119 124-r1 124-r2 141 ~141-r1 ~145 ~145-r1 ~145-r2 ~145-r3 ~146 146-r1 ~146-r2 ~147-r1 ~149 **9999 {devfs-compat extras selinux test}
   Installed versions:  146-r1(06:40:21 PM 01/08/2010)(devfs-compat extras -selinux)
   Homepage:          http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html
   Description:       Linux dynamic and persistent device naming support (aka userspace devfs)

你看一下这两个地方是不是这样的？

		自动登录	找回密码
密码			注册

ZTE MU350 成功上网（TD-SCDMA linux 3G）

谢谢刘工！

谢谢。

浏览过的版块