[求助]alsa启动失败

freeobject

Post by qiang_liu8183;1968994
很多人声卡经常出问题，但在modules块加载了硬件模块就就正常了，这你怎么解释？所以说不要人云亦云，任何问题的答案都不是绝对的，如果你不曾遇到并解决过同样的问题，说话最好不要这样绝对～～～

因为我的alsa是这么配置的。的确没有问题。hal应当放在前面。而且模块里不需要加载驱动

qiang_liu8183

Post by freeobject;1969009
因为我的alsa是这么配置的。的确没有问题。hal应当放在前面。而且模块里不需要加载驱动

你的声卡和楼主的型号一样吗？如果不一样，那么你的方法就不见得同样适合他

PS:事实证明有些声卡确实存在这种问题，例如我的乌龟4630，你不这么弄它就是不正常工作

qiang_liu8183

楼主应该确定hal有没有启动，然后lspci看看有没有声卡，再看看alsaconf里有没有识别出声卡型号

freeobject

还有lsmod
参考 arch wiki
查看log 信息

tensecor

Post by qiang_liu8183;1969014
楼主应该确定hal有没有启动，然后lspci看看有没有声卡，再看看alsaconf里有没有识别出声卡型号

lspci输出如下

1. 
   
2. 00:00.0 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
3. 00:00.1 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
4. 00:00.2 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
5. 00:00.3 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
6. 00:00.4 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
7. 00:00.5 PIC: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller
   
8. 00:00.7 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
   
9. 00:01.0 PCI bridge: VIA Technologies, Inc. [K8T890 North / VT8237 South] PCI Bridge
   
10. 00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
    
11. 00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
    
12. 00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
    
13. 00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
    
14. 00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
    
15. 00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
    
16. 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    
17. 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
    
18. 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
    
19. 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
    
20. 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
    
21. 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
    
22. 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
    
23. 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    
24. 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
    
25. 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    
26. 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    
27. 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    
28. 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    
29. 02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7300 GT] (rev a1)
    

复制代码

alsaconf最后输出的结果是

1. 
   
2. No legacy drivers are available
   

复制代码

上面的办法都试过，没有用