求助帖-- 那个兄弟使用AMD 770芯片组能正常安装LINUX?

linux_pro

Post by favoyun;1814142
ATI的芯片组我已经换了好几个daily cd来装了，没有一个能安装成功的，也不知咋搞的，noapic选项现在都已经默认了，原以为不用多此一举了，但还是没法安装，可能是那个acpi=off没用，下次再决战一次。
NV的芯片组没用过，不好说，显卡驱动感觉比ATI强多了，所以每次新的linux驱动一来，我就更新，而ATI显卡驱动更新时心里总是没谱，同样配置的机器，同样安装的系统，同样安装的方法，竟然会出不同的错，晕啊！
估计是ms力挺了一次AMD、ATI的缘故，所以双A对windows是屁颠屁颠的，还是前一阵子开源社区发了飙，双A感到压力才跟进的。

使用 noapic acpi=off 应该可以了.

如果还是不行得话 再使用 文本模式 就绝对可以.使用 SUSE10.3-GM
成功. 由于不是用DEBIAN所以没测试.

应该尽量使用2.6.22以上内核.

对了,提醒一句,如果是freebsd 6.x 版本(7.0没测试) 如果加载了安全模式还是不行得话 请根据错误提示来更改BIOS设置.  我得就是提示 USB错误. 进BIOS关闭USB一切OK.

fender010

Post by linux_pro;1814169
使用 noapic acpi=off 应该可以了.

如果还是不行得话 再使用 文本模式 就绝对可以.使用 SUSE10.3-GM
成功. 由于不是用DEBIAN所以没测试.

应该尽量使用2.6.22以上内核.

对了,提醒一句,如果是freebsd 6.x 版本(7.0没测试) 如果加载了安全模式还是不行得话 请根据错误提示来更改BIOS设置.  我得就是提示 USB错误. 进BIOS关闭USB一切OK.

你在770芯片的主板安装了freebsd了吗？

还有什么其他的问题吗？:yun:

linux_pro

Post by fender010;1814175
你在770芯片的主板安装了freebsd了吗？

还有什么其他的问题吗？:yun:

没有进行安装,只是启动.

没有硬盘,无法进行.

sandgrain

怎么玩都是家用个人电脑，玩4核心4g内存，不如上工作站，SUN的工作站，CPU阵列等等，费用估计差不多

linux_pro

Post by sandgrain;1814193
怎么玩都是家用个人电脑，玩4核心4g内存，不如上工作站，SUN的工作站，CPU阵列等等，费用估计差不多

??兄弟? 没事吧??

CPU四核心得 肥龙才几个钱啊?
内存不带ECC得白菜价.
磁盘硬阵列 5得话多少钱? 还不算SCSI.

老百姓玩玩这些低档的最多 2K-3K多点. 你说得这些都是.......

:daniu:

flyerwang

Linux_pro斑斑，上次你在悍马论坛发帖http://bbs.ocer.net/thread-187804-1-1.html
这几天我安装Fedora 8出现问题http://bbs.ocer.net/thread-199294-1-1.html
在论坛搜索看到你的帖子过来道歉了^_^上次急了点，见谅，你在悍马论坛的板块的帖子我已经回帖了

flyerwang

上星期买一块硬盘专门用来装Linux，我有不懂的过来问多指教啊^_^

linux_pro

Post by flyerwang;1828242
Linux_pro斑斑，上次你在悍马论坛发帖http://bbs.ocer.net/thread-187804-1-1.html
这几天我安装Fedora 8出现问题http://bbs.ocer.net/thread-199294-1-1.html
在论坛搜索看到你的帖子过来道歉了^_^上次急了点，见谅，你在悍马论坛的板块的帖子我已经回帖了

没关系。很高兴加入一个兄弟。 :daniu::daniu::daniu:

linux_pro

使用acpi=off noapic 参数能进系统。

但是CPU只能使用一个！！

已经升级到了 J5版本的了。


Linux linux 2.6.24.3-bigsmp #1 SMP Wed Mar 19 02:45:42 CST 2008 i686 athlon i386 GNU/Linux

大家看看 info的信息，是dmesg.
关键信息。

1. ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C3F670 could not acquire Mutex [3] [20070126]
   
2. system 00:07: iomem range 0x0-0x9ffff could not be reserved
   
3. system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
   
4. system 00:07: iomem range 0xfff80000-0xfffdffff could not be reserved
   
5. system 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
   
6. system 00:07: iomem range 0xfee00000-0xfee0ffff could not be reserved
   
7. system 00:07: iomem range 0x100000-0xffffff could not be reserved
   
8. system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
   
9. system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
   
10. system 00:08: iomem range 0xf8000-0xfffff could not be reserved
    
11. system 00:08: iomem range 0xcee00-0xcffff has been reserved

复制代码

1. Linux version 2.6.24.3-bigsmp (root@linux) (gcc version 4.2.1 (SUSE Linux)) #1 SMP Wed Mar 19 02:45:42 CST 2008
   
2. BIOS-provided physical RAM map:
   
3. BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
   
4. BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
   
5. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
   
6. BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
   
7. BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
   
8. BIOS-e820: 0000000001000000 - 00000000bffe0000 (usable)
   
9. BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
   
10. BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
    
11. BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
    
12. BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    
13. BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    
14. BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    
15. 4224MB HIGHMEM available.
    
16. 896MB LOWMEM available.
    
17. found SMP MP-table at 000f3ce0
    
18. NX (Execute Disable) protection: active
    
19. Entering add_active_range(0, 0, 1310720) 0 entries of 256 used
    
20. Zone PFN ranges:
    
21.   DMA             0 ->     4096
    
22.   Normal       4096 ->   229376
    
23.   HighMem    229376 ->  1310720
    
24. Movable zone start PFN for each node
    
25. early_node_map[1] active PFN ranges
    
26.     0:        0 ->  1310720
    
27. On node 0 totalpages: 1310720
    
28.   DMA zone: 32 pages used for memmap
    
29.   DMA zone: 0 pages reserved
    
30.   DMA zone: 4064 pages, LIFO batch:0
    
31.   Normal zone: 1760 pages used for memmap
    
32.   Normal zone: 223520 pages, LIFO batch:31
    
33.   HighMem zone: 8448 pages used for memmap
    
34.   HighMem zone: 1072896 pages, LIFO batch:31
    
35.   Movable zone: 0 pages used for memmap
    
36. DMI 2.5 present.
    
37. Using APIC driver default
    
38. ATI board detected. Disabling timer routing over 8254.
    
39. Intel MultiProcessor Specification v1.4
    
40.     Virtual Wire compatibility mode.
    
41. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
    
42. Processor #0 6:8 APIC version 17
    
43. Processor #1 6:8 APIC version 17
    
44. I/O APIC #4 Version 17 at 0xFEC00000.
    
45. Enabling APIC mode:  Flat.  Using 1 I/O APICs
    
46. Processors: 2
    
47. Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
    
48. swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    
49. swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
    
50. swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
    
51. swsusp: Registered nosave memory region: 0000000000f00000 - 0000000001000000
    
52. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1300480
    
53. Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3160815AS_6RA6617B-part5 vga=0x31a ide=nodma apm=off acpi=off noapic noresume edd=off 3 resume=/dev/sda7 splash=silent
    
54. mapped APIC to ffffb000 (fee00000)
    
55. mapped IOAPIC to ffffa000 (fec00000)
    
56. Enabling fast FPU save and restore... done.
    
57. Enabling unmasked SIMD FPU exception support... done.
    
58. Initializing CPU#0
    
59. PID hash table entries: 4096 (order: 12, 16384 bytes)
    
60. Detected 1900.202 MHz processor.
    
61. Console: colour dummy device 80x25
    
62. console [tty0] enabled
    
63. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    
64. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    
65. Memory: 4138584k/5242880k available (1874k kernel code, 53372k reserved, 831k data, 232k init, 3276672k highmem)
    
66. virtual kernel memory layout:
    
67.     fixmap  : 0xff933000 - 0xfffff000   (6960 kB)
    
68.     pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    
69.     vmalloc : 0xf8800000 - 0xff5fe000   ( 109 MB)
    
70.     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    
71.       .init : 0xc03ab000 - 0xc03e5000   ( 232 kB)
    
72.       .data : 0xc02d4ab1 - 0xc03a4704   ( 831 kB)
    
73.       .text : 0xc0100000 - 0xc02d4ab1   (1874 kB)
    
74. Checking if this processor honours the WP bit even in supervisor mode... Ok.
    
75. Calibrating delay using timer specific routine.. 3937.14 BogoMIPS (lpj=7874281)
    
76. Security Framework initialized
    
77. Mount-cache hash table entries: 512
    
78. CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000
    
79. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    
80. CPU: L2 Cache: 512K (64 bytes/line)
    
81. CPU 0(2) -> Core 0
    
82. CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000
    
83. Intel machine check architecture supported.
    
84. Intel machine check reporting enabled on CPU#0.
    
85. Compat vDSO mapped to ffffe000.
    
86. Checking 'hlt' instruction... OK.
    
87. SMP alternatives: switching to UP code
    
88. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 01
    
89. SMP alternatives: switching to SMP code
    
90. Booting processor 1/1 eip 3000
    
91. Not responding.
    
92. Inquiring remote APIC #1...
    
93. ... APIC #1 ID: 1000000
    
94. ... APIC #1 VERSION: 80050010
    
95. ... APIC #1 SPIV: ff
    
96. CPU #1 not responding - cannot use it.
    
97. Total of 1 processors activated (3937.14 BogoMIPS).
    
98. Brought up 1 CPUs
    
99. CPU0 attaching sched-domain:
    
100. domain 0: span 00000000,00000000,00000000,00000001
     
101.   groups: 00000000,00000000,00000000,00000001
     
102. PM: Adding info for No Bus:platform
     
103. net_namespace: 64 bytes
     
104. Booting paravirtualized kernel on bare hardware
     
105. Time: 13:22:12  Date: 03/29/08
     
106. NET: Registered protocol family 16
     
107. PM: Adding info for No Bus:vtcon0
     
108. PM: Adding info for No Bus:id
     
109. PCI: PCI BIOS revision 3.00 entry at 0xfa120, last bus=3
     
110. PCI: Using configuration type 1
     
111. Setting up standard PCI resources
     
112. ACPI: Interpreter disabled.
     
113. Linux Plug and Play Support v0.97 (c) Adam Belay
     
114. pnp: PnP ACPI: disabled
     
115. PnPBIOS: Scanning system for PnP BIOS support...
     
116. PnPBIOS: Found PnP BIOS installation structure at 0xc00fabf0
     
117. PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xac20, dseg 0xf0000

复制代码

linux_pro

这会又能认出两个 CPU了.....

一会能认出来，一会又认不出来....

比如关机再开机，或者reboot