|
|
楼主 |
发表于 2007-12-13 23:31:57
|
显示全部楼层
都搞定了
谢谢上面的那个哥们了
现在很好看
我发现显示双核的时候由于前面的百分比是不断变化的所以后面的位置会移动
于是我用${alignr}来定位让第二个cpu显示的位置不变，我在后面打了不少的空格。
用这种方法我定位了很多东西
就是说不会有显示位置的偏移了
最新配置文件如下：
# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
# set to yes if you want Conky to be forked in the background
background yes
# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans:size=11
# Text alpha when using Xft
# xftalpha 0.8
# Print everything to stdout?
out_to_console yes
MPD host/port
mpd_host localhost
mpd_port 6600
mpd_password tinker_bell
# Print everything to console?
out_to_console yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 1.0
# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0
# Create own window instead of using desktop (required in nautilus)
own_window yes
# If own_window is yes, you may use type normal, desktop or override
#own_window_type normal
# Use pseudo transparency with own_window?
own_window_transparent yes
# If own_window_transparent is set to no, you can set the background colour here
own_window_colour hotpink
# If own_window is yes, these window manager hints may be used
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 300 5
# Draw shades?
draw_shades yes
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Draw borders around graphs
draw_graph_borders yes
# Stippled borders?
stippled_borders 4
# border margins
border_margin 1
# border width
border_width 5
# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color black
dexter_client yes
dexter_server yes
# config file for libdexter (default search path: $HOME/.dexterrc; /etc/libdexter/dexter.conf)
dexter_config
# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none
# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 15
gap_y 15
# Subtract file system buffers from used memory?
no_buffers no
# set to yes if you want all text to be in uppercase
uppercase no
# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2
# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2
# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
# Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)
max_port_monitor_connections 256
# Maximum number of special things, e.g. fonts, offsets, aligns, etc.
max_specials 512
# Maximum size of buffer for user text, i.e. below TEXT line.
max_user_text 16384
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
# stuff after 'TEXT' will be formatted on screen
TEXT
========================
| $nodename - Debian/$sysname $kernel | ${alignc}${color}Uptime: $color $uptime
========================
${color #ddaa00}System Condition:
${color}Load: $color $loadavg | Processes: $processes | ${color}Running running_processes
${color}CPU1 Usage: ${cpu cpu1}% ${alignr}${color}CPU2 Usage{cpu cpu2}%
${color #88aadd}${cpubar cpu1 5,160} ${color #88aadd}${cpubar cpu2 5,160} ${color #ddaa00}Networking:
${color}CPU1 Graph: ${color}CPU2 Graph: ${color}Down{color #8844ee} ${downspeed eth0} k/s${color} ${offset 80}${color}Up{color #8844ee} ${upspeed eth0} k/s
${color #88aadd}${cpugraph cpu1 30,160} ${color #88aadd}${cpugraph cpu2 30,160} ${color #88aadd}${downspeedgraph eth0 30,160} ${color #88aadd}${upspeedgraph eth0 30,160}
${color}RAM Usage{color} $mem/$memmax - $memperc%
${color #88aadd}${membar}
${color}Swap Usage{color} $swap/$swapmax - $swapperc%
${color #88aadd}${swapbar}
${color}File systems:
${color}/ $color${fs_used /}/${fs_size /} ${color #88aadd}${fs_bar /}
${color}/home $color${fs_used /home}/${fs_size /home} ${color #88aadd}${fs_bar /home}
${color}=====================================================
${color #ddaa00}CPU Top:
PID CPU% NAME
${color}${top pid 1} ${top mem 1} ${top name 1}
${color}${top pid 2} ${top mem 2} ${top name 2}
${color}${top pid 3} ${top mem 3} ${top name 3}
${color}${top pid 4} ${top mem 4} ${top name 4}
${color #ddaa00}Memory Top:
PID MEM% NAME
${color}${top_mem pid 1} ${top_mem mem 1} ${top_mem name 1}
${color}${top_mem pid 2} ${top_mem mem 2} ${top_mem name 2}
${color}${top_mem pid 3} ${top_mem mem 3} ${top_mem name 3}
${color}${top_mem pid 4} ${top_mem mem 4} ${top_mem name 4}
${color}===================================
${color #ddaa00}Port(s): Connections:
${color}Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768 61000 count} ALL: ${tcp_portmon 1 65535 count}
${color #ddaa00}Inbound Connection | Local Service/Port | Outbound Connection | Remote Service/Port$color
${tcp_portmon 1 32767 rhost 0} ${tcp_portmon 1 32767 lservice 0} ${tcp_portmon 32768 61000 rhost 0} ${tcp_portmon 32768 61000 rservice 0}
${tcp_portmon 1 32767 rhost 1} ${tcp_portmon 1 32767 lservice 1} ${tcp_portmon 32768 61000 rhost 1} ${tcp_portmon 32768 61000 rservice 1}
${tcp_portmon 1 32767 rhost 2} ${tcp_portmon 1 32767 lservice 2} ${tcp_portmon 32768 61000 rhost 2} ${tcp_portmon 32768 61000 rservice 2}
${tcp_portmon 1 32767 rhost 3} ${tcp_portmon 1 32767 lservice 3} ${tcp_portmon 32768 61000 rhost 3} ${tcp_portmon 32768 61000 rservice 3}
${tcp_portmon 1 32767 rhost 4} ${tcp_portmon 1 32767 lservice 4} ${tcp_portmon 32768 61000 rhost 4} ${tcp_portmon 32768 61000 rservice 4}
${tcp_portmon 1 32767 rhost 5} ${tcp_portmon 1 32767 lservice 5} ${tcp_portmon 32768 61000 rhost 5} ${tcp_portmon 32768 61000 rservice 5}
${color}============================== |
|
IP卡
狗仔卡
发表于 2007-12-13 22:07:20
显身卡
发表于 2007-12-13 22:22:45
