suse10 上搞定 xgl。(图)

-志-

多谢nwslustc兄弟 。。我试试

-志-

nwslustc兄弟
好像是把
compiz --display :0 --replace gconf decoration wobbly fade minimize cube rotate zoom scale move resize place switcher
里的rotate参去掉就不能转了，，你自己可以试试 ：）

nwslustc

Post by -志-
nwslustc兄弟
好像是把
compiz --display :0 --replace gconf decoration wobbly fade minimize cube rotate zoom scale move resize place switcher
里的rotate参去掉就不能转了，，你自己可以试试 ：）

后面的参数是 compiz 加载的插件，可以参考 http://en.opensuse.org/Compiz

-志-

用什么命令让 kde的边框搞成半透明的？

Thruth

ATI / proprietary driver "fglrx"

The proprietary drivers for ATI cards have major issues at the current time.
Starting Xgl by default with DISPLAYMANAGER_XSERVER will not work with current drivers, because 'DISPLAY=:93 Xgl :0' wrongly tries to XOpenDisplay (:0.0) due to a xglQueryVersion, and as the Xgl's server port is already open, the connection does not immediately fail. This is a deadlock. ATI has been investigating, a fix is pending (see openSUSE bugzilla entry #129999.
If you are using gdm, the problem can be worked around by changing the line 0=Standard to 1=Standard in /etc/opt/gnome/gdm/gdm.conf. You can also start Xgl manually by yourself. Log into the system with a trivial window manager (e.g. twm), open an xterm, and start
      Xgl -fullscreen :1 & sleep 2 && DISPLAY=:1 kde
Substitute kde by gnome or fvwm2 or your other favorite desktop you would like to start.
According to several reports Xgl does not work at all with the latest drivers except when started manually.

ATI卡真惨。。。。。。。

冒泡

Post by Thruth
ATI卡真惨。。。。。。。

无所谓了，反正偶最近也要老实一阵子，偶书还没看完。


等10.1出来正是支持xgl偶再搞了。


还有现在ATI不知道在搞什么飞机？新的8.22驱动居然没有64位支持。

fztx

活活，期待，偶也在等10.1，sata阿sata...

demonlj

疑惑中，xgl需要xorg7.0以上的版本啊。为什么suse的6.9也可以？

-志-

我的系统找不到/usr/lib/libexpat.so.0 文件 有一个/usr/lib/libexpat.so.1文件

dorice

失败了:confused:
到第8步时，在控制台1提示已经有window-manager在运行，控制台2提示找不到extension……