LINUX进不了图形界面？

linuxjerry

谢谢，我再回去试试，可能还和显卡有关，我的显卡是主板微星６５０自带的sis650显示芯片。

还一个不要紧的问题，就如何退出Ｘ回到命令模式，看其他的帖子都是Ctrl + Alt + backspace可以退出图形界面，但是我的ｒｅｄｈａｔ９，shrike-2.40-8就回不去，按下这三个键马上就关机了（真是快，ｗｉｎｄｏｗｓ按电源还要３秒呢）。如果按下这三个键逐个键放开，是可以看到它关Ｘ并回到命令下的，但是只要一松最后一个键，马上就关机了。——说一个笑话，我曾经想用一快砖头压住最后一个Ctrl键好不让它ｓｈｕｔｄｏｗｎ，可惜，压住之后虽然不ｄｏｗｎ，可是也没办法输入命令了，呵呵，见笑。


这是那个ｌｏｇ文件：

hyoga

编辑/etc/X11/XF86Config
在Section "Files"里面,
加:        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"

linuxjerry

最初由 7dehao 发表
重新配置X看看。这个问题确实很怪呀。
#redhat-config-xfree86

配置之后不再闪进闪出，在出现大十字光标之后就没有进展了，只有这一个光标可以移动，其他都是黑的。

linuxjerry

最初由 hyoga 发表
编辑/etc/X11/XF86Config
在Section "Files"里面,
加:        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"

不行，还是出来一样的错误。其中的WW如下：
VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65472 kB
(II) VESA(0): VESA VBE OEM: SiS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) VESA(0): VESA VBE OEM Product: 6325
(II) VESA(0): VESA VBE OEM Product Rev: 1.11.23
(II) VESA(0): Splitting WC range: base: 0xe0000000, size: 0x3ff0000
(II) VESA(0): Splitting WC range: base: 0xe2000000, size: 0x1ff0000
(II) VESA(0): Splitting WC range: base: 0xe3000000, size: 0xff0000
(II) VESA(0): Splitting WC range: base: 0xe3800000, size: 0x7f0000
(II) VESA(0): Splitting WC range: base: 0xe3c00000, size: 0x3f0000
(II) VESA(0): Splitting WC range: base: 0xe3e00000, size: 0x1f0000
(II) VESA(0): Splitting WC range: base: 0xe3f00000, size: 0xf0000
(II) VESA(0): Splitting WC range: base: 0xe3f80000, size: 0x70000
(II) VESA(0): Splitting WC range: base: 0xe3fc0000, size: 0x30000
(==) VESA(0): Write-combining range (0xe3fe0000,0x10000)
(==) VESA(0): Write-combining range (0xe3fc0000,0x30000)
(==) VESA(0): Write-combining range (0xe3f80000,0x70000)
(==) VESA(0): Write-combining range (0xe3f00000,0xf0000)
(==) VESA(0): Write-combining range (0xe3e00000,0x1f0000)
(WW) VESA(0): Failed to set up write-combining range (0xe3c00000,0x3f0000)
(WW) VESA(0): Failed to set up write-combining range (0xe3800000,0x7f0000)
(WW) VESA(0): Failed to set up write-combining range (0xe3000000,0xff0000)
(WW) VESA(0): Failed to set up write-combining range (0xe2000000,0x1ff0000)
(WW) VESA(0): Failed to set up write-combining range (0xe0000000,0x3ff0000)
(II) VESA(0): virtual address = 0x42133000,
        physical address = 0xe0000000, size = 67043328
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) Option "dpms"
(**) VESA(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension

linuxjerry

(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: SiS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) VESA(0): VESA VBE OEM Product: 6325
(II) VESA(0): VESA VBE OEM Product Rev: 1.11.23
(==) VESA(0): Write-combining range (0xe0000000,0x1000000)
(II) VESA(0): virtual address = 0x40159000,
        physical address = 0xe0000000, size = 16777216
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) Option "dpms"
(**) VESA(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "rotocol" "IMPS/2"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "rotocol" "IMPS/2"
(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
Warning: font renderer for ".TTF" already registered at priority 10
Warning: font renderer for ".TTC" already registered at priority 10
最后这两行是什么意思呢？

linuxjerry

还是不行啊，请高手指点。

如果我用顶置贴上下载的那几个配置文件替换，要换哪几个文件呢？

7dehao

最初由 linuxjerry 发表
配置之后不再闪进闪出，在出现大十字光标之后就没有进展了，只有这一个光标可以移动，其他都是黑的。

把用户主目录下的.Xauthority删了，再运行redhat-config-xfree86看看。

javak46

我以前也碰到过这种情况，只是我是文字模式进入，startx报错，无奈只有重装啦！

linuxjerry

[root@J root]#redhat-config-xfree86
Fontconfig error: line437: mismatche tag
Fontconfig error: Connot load default config file

是哪一个文件出了问题呢？

linuxjerry

(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
Warning: font renderer for ".TTF" already registered at priority 10
Warning: font renderer for ".TTC" already registered at priority 10
最后这两行是什么意思呢？