cdrecord添加片段出错

mrkissinger

cdrecord进行刻录失败，过程如下：

**********************检查光盘信息**********************
gateway:/opt/schily/bin# cdrecord -msinfo
97730,170009
gateway:/opt/schily/bin#


**********************查看光盘内容**********************
gateway:/opt/schily/bin# cdrecord -toc
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J鲵g Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.29
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8200a'
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
first: 1 last 3
track:   1 lba:         0 (        0) 00:02:00 adr: 1 control: 4 mode: 1
track:   2 lba:     70275 (   281100) 15:39:00 adr: 1 control: 4 mode: 1
track:   3 lba:     97730 (   390920) 21:45:05 adr: 1 control: 4 mode: 1
track:lout lba:    163109 (   652436) 36:16:59 adr: 1 control: 4 mode: -1
gateway:/opt/schily/bin#

**********************开始刻录**********************

gateway:/backup/Software/WindowsSFU# mkisofs -J -C `cdrecord -msinfo` -V WindowsSFU * | cdrecord -v -multi -
Cdrecord 2.00.3 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J鲵g Schilling
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.29
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8200a'
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 4183808 = 4085 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  unknown length
Total size:        0 MB (00:00.00) = 0 sectors
Lout start:        0 MB (00:02/00) = 0 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12508 (97:15/17)
  ATIP start of lead out: 359848 (79:59/73)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
Starting to write CD/DVD at speed 4 in real TAO mode for multi session.
Last chance to quit, starting real write in 9 seconds.Warning: creating filesystem with (nonstandard) Joliet extensions
         but without (standard) Rock Ridge extensions.
         It is highly recommended to add Rock Ridge
mkisofs: Warning: -C specified without -M: old session data will not be merged.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 170009
Track 04:    0 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 02 98 19 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 40s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing  time:    7.010s
Fixating...
Fixating time:    0.003s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


原来使用debian自带的cdrecord，发现这个问题。后来下载了2.00的cdrecord自己编译了一下，问题仍然存在。

不知道哪位大虾可以帮忙解释一下怎么回事，谢谢。

mrkissinger

没有人用过吗？

million

超刻了么？超刻好象要加一个什么参数