3Com网卡驱动怎么装？

zxpemlin

我的网卡是主板集成的。我的主板是ASUS A7N8X  我以装了一个网卡。另外一个
去装不上。是3Com90x系列。驱动在哪个地方下载 。我装的RedHat 8.0

北南南北

这样，先把网卡的芯片列一下
#lspci

然后把信息帖上来，就有办法解决了。
多谢

zxpemlin

[root@localhost etc]# lspci
00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
00:01.0 ISA bridge: nVidia Corporation: Unknown device 0060 (rev a4)
00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2)
00:02.0 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
00:02.1 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
00:02.2 USB Controller: nVidia Corporation: Unknown device 0068 (rev a4)
00:04.0 Ethernet controller: nVidia Corporation: Unknown device 0066 (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation: Unknown device 006b (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 006a (rev a1)
00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3)
00:09.0 IDE interface: nVidia Corporation: Unknown device 0065 (rev a2)
00:0c.0 PCI bridge: nVidia Corporation: Unknown device 006d (rev a3)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation: Unknown device 006e (rev a3)
00:1e.0 PCI bridge: nVidia Corporation: Unknown device 01e8 (rev c1)
02:01.0 Ethernet controller: 3Com Corporation: Unknown device 9201 (rev 40)
03:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev b2)

zxpemlin

eth0 has an alias to module nvnet in modules conf instead of currentty module 3c59x

victoryhe

Ethernet controller: 3Com Corporation: Unknown device 9201 (rev 40)

北南南北

最初由 zxpemlin 发表
eth0 has an alias to module nvnet in modules conf instead of currentty module 3c59x

这样来试一下
在/etc/modules.conf中，如果原来有关于eth0的一行，请删除。然后加上下面的一行
alias eth0 3c59x

然后用redhat-config-network 来设置IP和DNS等。

试一下