[问题]funtoo的wifi无线上网设置

eayha

安装funtoo到基本配置完毕花了我3天时间， 就这个wifi上网 一直搞不定  有时候很想删掉装个ubuntu省事，但毕竟花了很多时间和心血在上面。所以，各位看官多多帮忙了 TX.

funtoo的网络管理脚本和gentoo有点不一样。关键是没有那个/etc/conf.d/net文件了，而funtoo的官方文档对无线设置这一块资料很少，我也没看懂 :sorry


    自己装了iwl1000的驱动，ifconfig 可以显示出无线网卡已经启用。
iwlist wlan0 scanning可以搜索到一个热点：

  Channel:13
                    Frequency:2.472 GHz (Channel 13)
                    Quality=19/70  Signal level=-91 dBm  
                    Encryption keyn
                    ESSID:"WIFI"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              12 Mb/s; 24 Mb/s; 36 Mb/s
                    Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000001e5a1e181
                    Extra: Last beacon: 101ms ago
                    IE: Unknown: 000457494649
                    IE: Unknown: 010882848B960C183048
                    IE: Unknown: 03010D

我知道这个热点的密码，但是按照funtoo的手册上执行：
#wpa_passphrase WIF  passwd >> /etc/wpa_supplication/wpa_supplication.conf
#wpa_supplication -i wlan0 -c /etc/wpa_supplication/wpa_supplication.con
老是出错：

Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
   id=0 ssid='WIFI'
WEXT: cfg80211-based driver detected
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf flags 0x0
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:1e:64:4a:5c:50
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): c5 3a fd 4b 19 4f 55 68 92 11 8b de e8 70 a5 99
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b1a len=16
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 763 bytes of scan results (2 BSSes)
BSS: Start scan result update 1
BSS: Add new id 0 BSSID 94:0c:6d:66:d2:ce SSID 'WIFI'
BSS: Add new id 1 BSSID 00:22:93:47:38:d6 SSID 'ChinaNet'
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 94:0c:6d:66:d2:ce ssid='WIFI' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
1: 00:22:93:47:38:d6 ssid='ChinaNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
Try to find non-WPA AP
0: 94:0c:6d:66:d2:ce ssid='WIFI' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - non-WPA network not allowed
1: 00:22:93:47:38:d6 ssid='ChinaNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - SSID mismatch
No suitable network found
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan for wildcard SSID
Scan requested (ret=0) - scan timeout 5 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=16
Received 761 bytes of scan results (2 BSSes)
BSS: Start scan result update 2
New scan results available
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 94:0c:6d:66:d2:ce ssid='WIFI' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - no WPA/RSN IE
1: 00:22:93:47:38:d6 ssid='ChinaNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
Try to find non-WPA AP
0: 94:0c:6d:66:d2:ce ssid='WIFI' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
   skip - non-WPA network not allowed
1: 00:22:93:47:38:d6 ssid='ChinaNet' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - SSID mismatch
No suitable network found
Setting scan request: 5 sec 0 usec
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauth

请问怎么办呢？

夜猫子

老实说我对gentoo/funtoo的无线设置也没有搞得非常清楚
不过我通过net-misc/wicd来搞定这个问题
wicd有gtk前端，也可以在命令行下使用（wicd-curses），可以考虑试试看

box.xoq

我也推薦wicd

dutongtie

Post by box.xoq;2081537
我也推薦wicd

好象 wicd WPA2不支持的。