[help me!]（Fedora 9）关于T41 上安装 NVS 140M显卡的问题！

doublej.yi

各位高手们，大家好！
        我是一位Fedora的新手，其实在很久以前就听说了liunx，由于我的职业（JAVA 程序员）关系，也需要接触liunx，以前觉得很麻烦，一直不敢接触，后来鼓足勇气在我的电脑上安装了双系统，我的分区如下：
h0,0    ext3     120M    //引导
h0,1    ext3      20G     // liunx
h0.2    NTFS   20G     //XP
h0.3     FAT32  10G    //  liunx and xp 共享
......      扩展分区

先装XP， 安装到h0,2分区中。。。
一切顺利；
再装 fedora 9 .
我选择的是删除liunx分区并安规则分区，
具体怎么分的我也不知道了！
呵呵。 我就是这么菜！

安装完fedora 9 的第一件事就是进xp看看是否能用。 呵呵，还好！能用！
回到fedora 9 中， 听到了开机的声音！
发现声卡，本地网卡，无线网卡,蓝牙都能用，就只是显卡不能用！

我显卡的配置：
         14.1 SXGA 1400X1050
         Nvidia 140M (128MB)
于是在GOOGLE找了两天，没有办法解决！
最后在网上找了这么一段话:

**********************************************************************************************
*  NVIDIA Quadro NVS 140m

Perform initial install using text-mode or vnc mode. Installation via vnc is necessary to configure LVM. After booting for the first time into runlevel 3, install the livna repository and NVIDIA binary kernel module or install the driver using the NVIDIA installation package.

32-bit:

$ rpm -ivh http://rpm.livna.org/livna-release-8.rpm
$ yum install kmod-nvidia
$ /usr/sbin/nvidia-config-display enable

64-bit:

$ rpm -ivh http://rpm.livna.org/livna-release-8.rpm
$ yum install kmod-nvidia xorg-x11-drv-nvidia-32bit
$ /usr/sbin/nvidia-config-display enable

Currently running Compiz-Fusion with no problems. Livna does not currently have NVIDIA kernel module rpms for Xen kernels.

Note: the brightness control fails on kernel-2.6.23.1-42, due to a problem in kernel module acpi/video.ko.

    * If you blacklist video.ko and ask thinkpad-acpi to manage the brightness, Fn-keys don't work but brightness control by software works.
    * If you don't blacklist video.ko and ask thinkpad-acpi to manage the brightness, Fn-keys sometimes works but it will splash to highest brightness whenever you make a change.

The method to blacklist 'video' is to add a line in /etc/modprobe/blacklist blacklist video The method to ask thinkpad-acpi managing brightness is to add a line in /etc/modprobe.conf options thinkpad-acpi brightness_enable=1 The line in my box is options thinkpad-acpi brightness_enable=1 hotkey_report_mode=2
******************************************************************************************

我是按照64-bit:提示去做的。
运行 rpm -ivh http://rpm.livna.org/livna-release-8.rpm
没问题，
运行yum install kmod-nvidia xorg-x11-drv-nvidia-32bit
也没问题
但运行  /usr/sbin/nvidia-config-display enable
就有问题了，
提示：bash: /usr/sbin/nvidia-config-display: 没有那个文件或目录
我真的很菜，
前面两个命令我也不知道是不是有问题了 ，
现在我重新运行了 这三个命令，把结果发上来，请大家帮帮我！
[root@localhost sbin]#  rpm -ivh http://rpm.livna.org/livna-release-8.rpm
Retrieving http://rpm.livna.org/livna-release-8.rpm
Preparing...                ########################################### [100%]
        package livna-release-9-1.noarch (which is newer than livna-release-8-1.noarch) is already installed
//结果是下载的文件已经存在了

yum install kmod-nvidia
Loaded plugins: refresh-packagekit
fedora                                                   | 2.4 kB     00:00   
updates                                                  | 2.6 kB     00:00   
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package kmod-nvidia.x86_64 0:173.14.12-5.lvn9 set to be updated
--> Processing Dependency: kmod-nvidia-2.6.26.5-45.fc9.x86_64 = 173.14.12-5.lvn9 for package: kmod-nvidia
--> Running transaction check
---> Package kmod-nvidia-2.6.26.5-45.fc9.x86_64.x86_64 0:173.14.12-5.lvn9 set to be updated
--> Processing Dependency: kernel-uname-r = 2.6.26.5-45.fc9.x86_64 for package: kmod-nvidia-2.6.26.5-45.fc9.x86_64
--> Processing Dependency: nvidia-kmod-common >= 173.14.12 for package: kmod-nvidia-2.6.26.5-45.fc9.x86_64
--> Running transaction check
---> Package xorg-x11-drv-nvidia.x86_64 0:173.14.12-1.lvn9 set to be updated
--> Processing Dependency: xorg-x11-drv-nvidia-libs = 173.14.12-1.lvn9 for package: xorg-x11-drv-nvidia
--> Processing Dependency: livna-config-display for package: xorg-x11-drv-nvidia
--> Processing Dependency: /usr/lib64/nvidia/libGL.so.173.14.12 for package: xorg-x11-drv-nvidia
--> Processing Dependency: livna-config-display for package: xorg-x11-drv-nvidia
---> Package kmod-nvidia-2.6.26.5-45.fc9.x86_64.x86_64 0:173.14.12-5.lvn9 set to be updated
--> Processing Dependency: kernel-uname-r = 2.6.26.5-45.fc9.x86_64 for package: kmod-nvidia-2.6.26.5-45.fc9.x86_64
--> Running transaction check
---> Package kmod-nvidia-2.6.26.5-45.fc9.x86_64.x86_64 0:173.14.12-5.lvn9 set to be updated
--> Processing Dependency: kernel-uname-r = 2.6.26.5-45.fc9.x86_64 for package: kmod-nvidia-2.6.26.5-45.fc9.x86_64
---> Package xorg-x11-drv-nvidia-libs.x86_64 0:173.14.12-1.lvn9 set to be updated
---> Package livna-config-display.noarch 0:0.0.20-1.lvn9 set to be updated
--> Finished Dependency Resolution
kmod-nvidia-2.6.26.5-45.fc9.x86_64-173.14.12-5.lvn9.x86_64 from livna has depsolving problems
  --> Missing Dependency: kernel-uname-r = 2.6.26.5-45.fc9.x86_64 is needed by package kmod-nvidia-2.6.26.5-45.fc9.x86_64-173.14.12-5.lvn9.x86_64 (livna)
Error: Missing Dependency: kernel-uname-r = 2.6.26.5-45.fc9.x86_64 is needed by package kmod-nvidia-2.6.26.5-45.fc9.x86_64-173.14.12-5.lvn9.x86_64 (livna)



[root@localhost sbin]#  /usr/sbin/nvidia-config-display enable
bash: /usr/sbin/nvidia-config-display: 没有那个文件或目录

大家帮帮我吧！！
                                                                                              一个很想学liunx的人！

pingz

没装当然没有……

提示不是说了遇到了依赖关系错误吗？

你先

1. yum clean all

复制代码

再

1. yum update

复制代码

，再装试试。

yd_xzn

楼主T41的CPU不支持64位技术，所以装64位的软件(即x86_64)是装不上的。

先卸载64位的livna-release-9-1.noarch :
rpm -e livna-release-9-1.noarch

再安装32位的。