|
|
各位大哥，
小弟有两个U盘，在XP下都能用。但在RH9.0下只有一个能用。
当我执行 fdisk -l 时，不能挂载的那个U盘的提示信息如下，您看您知道怎么解决不？
Disk /dev/sdb: 131 MB, 131070976 bytes
5 heads, 50 sectors/track, 1023 cylinders
Units = cylinders of 250 * 512 = 128000 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 ? 3112544 7678583 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(3112543, 3, 9)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(7678582, 0, 39)
Partition 1 does not end on cylinder boundary.
/dev/sdb2 ? 674759 8418872 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(674758, 0, 23)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(8418871, 0, 12)
Partition 2 does not end on cylinder boundary.
/dev/sdb3 ? 7479526 15223639 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(7479525, 4, 16)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(15223638, 3, 7)
Partition 3 does not end on cylinder boundary.
/dev/sdb4 ? 11542725 11542947 27749+ d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(11542724, 3, 3)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(11542946, 3, 1)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
Disk /dev/hda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1217 9775521 c Win95 FAT32 (LBA)
/dev/hda2 1218 4997 30362850 f Win95 Ext'd (LBA)
/dev/hda5 1218 2434 9775521 b Win95 FAT32
/dev/hda6 2435 3651 9775521 b Win95 FAT32
/dev/hda7 3652 4416 6144831 83 Linux
/dev/hda8 4417 4481 522081 82 Linux swap
这个问题可能比较怪，不管您能否解决，先谢谢啦！！ |
|
IP卡
狗仔卡
发表于 2007-2-28 21:26:04
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主