|
|
我装的xorg6.9.0无法enable Dri
我编译内核（2.6.16）已经编译了drm和intel 852,855,915 ..support啊
xorg.0.log如下:
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(==) I810(0): Depth 16, (==) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(**) I810(0): Option "DRI"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) I810(0): Chipset: "852GM/855GM"
(--) I810(0): Linear framebuffer at 0xB0000000
(--) I810(0): IO registers at addr 0xF0000000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 8060 kB stolen memory.
(II) I810(0): Kernel reported 50176 total, 1 used
(II) I810(0): Checking Available AGP Memory: 200700 kB available (total 200704 kB, used 4 kB)
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(WW) I810(0): Extended BIOS function 0x5f11 not supported.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Tweak BIOS image to 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 8060 kByte
(==) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x83e
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 2978
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (0,0)
(II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: CRT2 (second CRT): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0)
(II) I810(0): Size of device LFP (local flat panel) is 1024 x 768
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1024 x 768
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1024x768
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level none
(II) I810(0): VESA VBE DDC transfer in appr. 0 sec.
(II) I810(0): VESA VBE DDC read failed
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte
........
(II) I810(0): Monitor0: Using hsync range of 43.89-48.51 kHz
(II) I810(0): Monitor0: Using vrefresh value of 60.00 Hz
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(==) I810(0): DPI set to (75, 75)
......
(==) I810(0): VBE Restore workaround: enabled.
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/X11R6/lib/modules/extensions/libdri.so
(II) UnloadModule: "dri"
(II) I810: Failed to load module "dri" (already loaded, 0)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 768 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 3072 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000 (0x0576d000)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000 (0x06064000)
(II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffa000 (0x067fc000).
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fea000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xd0056000
(II) I810(0): [drm] mapped SAREA 0xd0056000 to 0xb7f44000
(II) I810(0): [drm] framebuffer handle = 0xb0020000
(II) I810(0): [drm] added 1 reserved context for kernel
(WW) I810(0): i830 Kernel module detected, Use the i915 Kernel module instead, aborting DRI init.
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd0056000 at 0xb7f44000
(II) I810(0): Updated framebuffer allocation size from 3072 to 4096 kByte
(II) I810(0): Updated pixmap cache from 768 scanlines to 1280 scanlines
(II) I810(0): 0x824794c: Memory at offset 0x00020000, size 4096 kBytes
(II) I810(0): 0x8247fc8: Memory at offset 0x07fff000, size 4 kBytes
(II) I810(0): 0x8248438: Memory at offset 0x07ffb000, size 16 kBytes
(II) I810(0): 0x8247e8c: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x824798c: Memory at offset 0x07fea000, size 64 kBytes
(II) I810(0): 0x8248460: Memory at offset 0x07ffa000, size 4 kBytes
(==) I810(0): Write-combining range (0xb0000000,0x8000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp-> IOOffset is 0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x007df000 (pgoffset 2015)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset 32746)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset 32762)
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 126 Mbyte/s, 0 Mbyte/s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(II) I810(0): direct rendering: Failed
(==) RandR enabled
.......
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
the saved state
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(WW) I810(0): Successfully set original devices (2) |
|
IP卡
狗仔卡
发表于 2006-11-28 18:30:49
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主