按照网上的安装adsl驱动方式安装，出现如下问题请帮忙！

foxconnwj

安装完cxacru-2003-10-05驱动之后,运行cxstart.sh命令后，出现如下错误信息请帮忙！
[root@localhost cxacru]# cxstart.sh
>>> Inits Conexant AccessRunner <<<

>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
........
ADSL line is up (Downstream 1024 Kbits/s, Upstream 512 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...

/usr/sbin/cxload.sh successful
Setting PPP over Ethernet...
>>> Setting PPPoE <<<

>>> Loading br2684 kernel module...

>>> Loading ppp_generic...

>>> Loading br2684ctl...
RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.0.33, encapsulation: LLC
RFC1483/2684 bridge: Interface configured

>>> Activating interface...
>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00

>>> Loading pppd daemon...
/sbin/adsl-start: line 215: 16619 Terminated              $CONNECT "$@" >/dev/null 2>&1
不知道那里出问题了，很头疼！