USB-实达5800ub-ADSL上网问题 ，快进来帮我看看错误！

budaodao

机器里就是看到ADSL虚拟的那块网卡。只有我机器里原来的两块网卡。
就是看不到PPP0这样的设备名。大家看看在拔号的时候，已经发现了我的网络速度等。。可是为什么最后出现在了错误。。(什么意思)

我这里通信公司说PPPOA与PPPOE都行。我试了一下在windows下真的可以。

root@0[jason]# cxstart.sh
>>> Inits Conexant AccessRunner <<<

>>> Removing cxacru driver...

>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
.........
ADSL line is up (Downstream 576 Kbits/s, Upstream 128 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...

/usr/sbin/cxload.sh successful
Setting PPP over ATM...
>>> Setting PPPoA <<<

>>> Loading ppp_generic...

>>> Loading pppoatm...

>>> Activating send/receive data...
Conexant AccessRunner ioctl call. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00

>>> Loading pppd daemon...
Plugin /usr/lib/pppd/2.4.2/pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname - remove unwanted options
PPPoATM setdevname_pppoatm - SUCCESS:8.35
pppd: The remote system is required to authenticate itself
pppd: but I couldn't find any suitable secret (password) for it to use to do so.
pppd: (None of the available passwords would let it use an IP address.)

budaodao

这是为什么？



root@0[ppp]# cxstart.sh
>>> Inits Conexant AccessRunner <<<

>>> Loading firmware...
Conexant AccessRunner microcode upload program. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00
Loading and sending /usr/sbin/cxfirm4.bin...
Firmware is sent!
Setting configuration...
Waiting ADSL line is up (until 90 seconds)...
........
ADSL line is up (Downstream 576 Kbits/s, Upstream 128 Kbits/s)
>>> Loading driver...
Launching driver in normal mode...

/usr/sbin/cxload.sh successful
Setting PPP over Ethernet...
>>> Setting PPPoE <<<

>>> Loading br2684 kernel module...

>>> Loading ppp_generic...

>>> Loading br2684ctl...
Conexant AccessRunner ioctl call. 6/9/2003
Josep Comas <jcomas@gna.es>
See credits in documentation

I found ADSL modem with VendorID = 0572 & ProductID = cb00
br2684ctl[8494]: Interface "nas0" created sucessfully
br2684ctl[8494]: Communicating over ATM 0.8.35, encapsulation: LLC
br2684ctl[8494]: Interface configured

>>> Activating interface...
>>> Activating send/receive data...

>>> Loading pppd daemon...
Plugin /usr/lib/pppd/2.4.2/pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname - remove unwanted options
PPPoATM setdevname_pppoatm - SUCCESS:8.35
/usr/sbin/pppd: In file /etc/ppp/peers/dsl-provider: unrecognized option 'pty'
root@0[ppp]# ifconfig
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
                    inet6 addr: ::1/128 Scope:Host
                              UP LOOPBACK RUNNING  MTU:16436  Metric:1
                                        RX packets:174 errors:0 dropped:0 overruns:0 frame:0
                                                  TX packets:174 errors:0 dropped:0 overruns:0 carrier:0
                                                            collisions:0 txqueuelen:0
                                                                      RX bytes:11630 (11.3 KiB)  TX bytes:11630 (11.3 KiB)

                                                                      nas0      Link encap:Ethernet  HWaddr 00:00:01:00:00:00
                                                                                inet6 addr: fe80::200:1ff:fe00:0/64 Scopeink
                                                                                          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                                                                                                    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                                                                                              TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
                                                                                                                        collisions:0 txqueuelen:1000
                                                                                                                                  RX bytes:0 (0.0 b)  TX bytes:428 (428.0 b)

wkt

对此比较有兴趣
顶一个