LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 909|回复: 4

新手安装后启动过程中停顿的现象

[复制链接]
发表于 2010-12-31 09:52:52 | 显示全部楼层 |阅读模式
我的硬件信息是
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
06:07.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:07.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:07.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:08.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)

dmesg命令结果是:
[    0.000000] Linux version 2.6.36-gentoo-r5 (root@acer-laptop) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.3, pie-0.4.5) ) #5 SMP PREEMPT Wed Dec 29 08:13:58 CST 2010
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
[    0.000000]  BIOS-e820: 000000007f670000 - 000000007f685000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f685000 - 000000007f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f670 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] ACPI: RSDP 000f6990 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 7f67e877 00040 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7f684e8a 00074 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: DSDT 7f67eca8 061E2 (v01 INTEL  ALVISO   06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 7f695fc0 00040
[    0.000000] ACPI: APIC 7f684efe 00066 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: HPET 7f684f64 00038 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: MCFG 7f684f9c 0003C (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
[    0.000000] ACPI: BOOT 7f684fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 7f67ead0 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
[    0.000000] ACPI: SSDT 7f67e8b7 00219 (v01  PmRef    CpuPm 00003000 INTL 20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] early_res array is doubled to 64 at [3000 - 37ff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f670
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f670
[    0.000000] On node 0 totalpages: 521742
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3966 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292213 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 255, address 0xfec20000, GSI 24-279
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 296
[    0.000000] early_res array is doubled to 128 at [3800 - 47ff]
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @c2c00000 s31552 r0 d21696 u4194304
[    0.000000] pcpu-alloc: s31552 r0 d21696 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517665
[    0.000000] Kernel command line: root=/dev/sda8 rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (70 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0001000000 - 00018999a4]   TEXT DATA BSS
[    0.000000]   #3 [000009f800 - 0000100000]   BIOS reserved
[    0.000000]   #4 [000189a000 - 00018a1150]             BRK
[    0.000000]   #5 [0000002000 - 0000003000]      TRAMPOLINE
[    0.000000]   #6 [0000007000 - 0000008000]         PGTABLE
[    0.000000]   #7 [00018a2000 - 00018a3000]         BOOTMEM
[    0.000000]   #8 [0001899ac0 - 0001899bc0]         BOOTMEM
[    0.000000]   #9 [00018a3000 - 0001923000]         BOOTMEM
[    0.000000]   #10 [0001923000 - 00019a3000]         BOOTMEM
[    0.000000]   #11 [00019a3000 - 0001a23000]         BOOTMEM
[    0.000000]   #12 [0001a23000 - 0001aa3000]         BOOTMEM
[    0.000000]   #13 [0001aa3000 - 0001b23000]         BOOTMEM
[    0.000000]   #14 [0001b23000 - 0001ba3000]         BOOTMEM
[    0.000000]   #15 [0001ba3000 - 0001c23000]         BOOTMEM
[    0.000000]   #16 [0001c23000 - 0001ca3000]         BOOTMEM
[    0.000000]   #17 [0001ca3000 - 0001d23000]         BOOTMEM
[    0.000000]   #18 [0001d23000 - 0001da3000]         BOOTMEM
[    0.000000]   #19 [0001da3000 - 0001e23000]         BOOTMEM
[    0.000000]   #20 [0001e23000 - 0001ea3000]         BOOTMEM
[    0.000000]   #21 [0001ea3000 - 0001f23000]         BOOTMEM
[    0.000000]   #22 [0001f23000 - 0001fa3000]         BOOTMEM
[    0.000000]   #23 [0001fa3000 - 0002023000]         BOOTMEM
[    0.000000]   #24 [0002023000 - 00020a3000]         BOOTMEM
[    0.000000]   #25 [00020a3000 - 0002123000]         BOOTMEM
[    0.000000]   #26 [0002123000 - 00021a3000]         BOOTMEM
[    0.000000]   #27 [00021a3000 - 0002223000]         BOOTMEM
[    0.000000]   #28 [0002223000 - 00022a3000]         BOOTMEM
[    0.000000]   #29 [00022a3000 - 0002323000]         BOOTMEM
[    0.000000]   #30 [0002323000 - 00023a3000]         BOOTMEM
[    0.000000]   #31 [00023a3000 - 0002423000]         BOOTMEM
[    0.000000]   #32 [0002423000 - 00024a3000]         BOOTMEM
[    0.000000]   #33 [00024a3000 - 0002523000]         BOOTMEM
[    0.000000]   #34 [0002523000 - 00025a3000]         BOOTMEM
[    0.000000]   #35 [00025a3000 - 0002623000]         BOOTMEM
[    0.000000]   #36 [0002623000 - 00026a3000]         BOOTMEM
[    0.000000]   #37 [00026a3000 - 0002723000]         BOOTMEM
[    0.000000]   #38 [0002723000 - 00027a3000]         BOOTMEM
[    0.000000]   #39 [00027a3000 - 0002823000]         BOOTMEM
[    0.000000]   #40 [0002823000 - 00028a3000]         BOOTMEM
[    0.000000]   #41 [00018999c0 - 0001899a80]         BOOTMEM
[    0.000000]   #42 [00028a3000 - 00028a6000]         BOOTMEM
[    0.000000]   #43 [00028a6000 - 00028ac000]         BOOTMEM
[    0.000000]   #44 [0001899bc0 - 0001899c0e]         BOOTMEM
[    0.000000]   #45 [0001899c40 - 0001899dac]         BOOTMEM
[    0.000000]   #46 [0001899a80 - 0001899ac0]         BOOTMEM
[    0.000000]   #47 [0001899dc0 - 0001899e00]         BOOTMEM
[    0.000000]   #48 [0001899e00 - 0001899e40]         BOOTMEM
[    0.000000]   #49 [0001899e40 - 0001899e80]         BOOTMEM
[    0.000000]   #50 [0001899e80 - 0001899ec0]         BOOTMEM
[    0.000000]   #51 [0001899ec0 - 0001899f00]         BOOTMEM
[    0.000000]   #52 [0001899f00 - 0001899f40]         BOOTMEM
[    0.000000]   #53 [0001899f40 - 0001899f80]         BOOTMEM
[    0.000000]   #54 [0001899f80 - 0001899fc0]         BOOTMEM
[    0.000000]   #55 [0001899fc0 - 000189a000]         BOOTMEM
[    0.000000]   #56 [00018a1180 - 00018a11c0]         BOOTMEM
[    0.000000]   #57 [00018a11c0 - 00018a1200]         BOOTMEM
[    0.000000]   #58 [00018a1200 - 00018a121f]         BOOTMEM
[    0.000000]   #59 [00018a1240 - 00018a125f]         BOOTMEM
[    0.000000]   #60 [0002c00000 - 0002c0d000]         BOOTMEM
[    0.000000]   #61 [00018a1280 - 00018a1284]         BOOTMEM
[    0.000000]   #62 [00018a12c0 - 00018a12c4]         BOOTMEM
[    0.000000]   #63 [00018a1300 - 00018a1304]         BOOTMEM
[    0.000000]   #64 [00018a1340 - 00018a1344]         BOOTMEM
[    0.000000]   #65 [00018a1380 - 00018a1430]         BOOTMEM
[    0.000000]   #66 [00018a1440 - 00018a14e8]         BOOTMEM
[    0.000000]   #67 [00028ac000 - 00028b0000]         BOOTMEM
[    0.000000]   #68 [00028b0000 - 0002930000]         BOOTMEM
[    0.000000]   #69 [0002930000 - 0002970000]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f670)
[    0.000000] Memory: 2060856k/2087360k available (5322k kernel code, 26112k reserved, 2522k data, 412k init, 1178056k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc17aa000 - 0xc1811000   ( 412 kB)
[    0.000000]       .data : 0xc153284d - 0xc17a93b4   (2522 kB)
[    0.000000]       .text : 0xc1000000 - 0xc153284d   (5322 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]         RCU-based detection of stalled CPUs is disabled.
[    0.000000]         Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1297.350 MHz processor.
[    0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.70 BogoMIPS (lpj=1297350)
[    0.001220] pid_max: default: 32768 minimum: 301
[    0.001362] Mount-cache hash table entries: 512
[    0.001707] mce: CPU supports 5 MCE banks
[    0.001832] Performance Events: p6 PMU driver.
[    0.002107] ... version:                0
[    0.002207] ... bit width:              32
[    0.002308] ... generic registers:      2
[    0.002409] ... value mask:             00000000ffffffff
[    0.002513] ... max period:             000000007fffffff
[    0.002617] ... fixed-purpose events:   0
[    0.002718] ... event mask:             0000000000000003
[    0.003719] SMP alternatives: switching to UP code
[    0.008605] Freeing SMP alternatives: 20k freed
[    0.008720] ACPI: Core revision 20100702
[    0.019087] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.021894] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032017] CPU0: Intel(R) Celeron(R) M processor         1.30GHz stepping 08
[    0.034087] Brought up 1 CPUs
[    0.034188] Total of 1 processors activated (2594.70 BogoMIPS).
[    0.035304] kworker/u:0 used greatest stack depth: 7544 bytes left
[    0.036365] NET: Registered protocol family 16
[    0.037056] ACPI: bus type pci registered
[    0.037323] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.037495] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.037604] PCI: Using MMCONFIG for extended config space
[    0.037708] PCI: Using configuration type 1 for base access
[    0.038728] kworker/u:0 used greatest stack depth: 7208 bytes left
[    0.046502] bio: create slab <bio-0> at 0
[    0.048902] ACPI: EC: Look up EC in DSDT
[    0.355061] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.388105] ACPI: Interpreter enabled
[    0.388207] ACPI: (supports S0 S5)
[    0.388384] ACPI: Using IOAPIC for interrupt routing
[    0.396768] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.397024] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.397847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.399309] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.399314] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xbfff] (ignored)
[    0.399319] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.399324] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.399329] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.399333] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.399338] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.399343] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.399427] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
[    0.399436] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.399446] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.399455] pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
[    0.399506] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[    0.399642] pci 0000:00:1b.0: reg 10: [mem 0xd000c000-0xd000ffff 64bit]
[    0.399732] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.399739] pci 0000:00:1b.0: PME# disabled
[    0.399857] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.399864] pci 0000:00:1c.0: PME# disabled
[    0.399985] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.399992] pci 0000:00:1c.1: PME# disabled
[    0.400123] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.400130] pci 0000:00:1c.2: PME# disabled
[    0.400224] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.400326] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.400428] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.400530] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.400610] pci 0000:00:1d.7: reg 10: [mem 0xb0040000-0xb00403ff]
[    0.400707] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.400714] pci 0000:00:1d.7: PME# disabled
[    0.400940] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.400950] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.401006] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.401117] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[    0.401227] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0060-006f
[    0.401369] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.401384] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.401399] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.401414] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.401428] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    0.401553] pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
[    0.401667] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[    0.401776] pci 0000:00:1c.0:   bridge window [io  0x0000-0x0000] (disabled)
[    0.401783] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.401794] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.401861] pci 0000:00:1c.1: PCI bridge to [bus 0a-0a]
[    0.402019] pci 0000:00:1c.1:   bridge window [io  0x0000-0x0000] (disabled)
[    0.402027] pci 0000:00:1c.1:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.402037] pci 0000:00:1c.1:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.402106] pci 0000:00:1c.2: PCI bridge to [bus 02-04]
[    0.402215] pci 0000:00:1c.2:   bridge window [io  0x0000-0x0000] (disabled)
[    0.402222] pci 0000:00:1c.2:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.402233] pci 0000:00:1c.2:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.402339] pci 0000:06:06.0: reg 10: [mem 0xb0100000-0xb010ffff]
[    0.402472] pci 0000:06:06.0: PME# supported from D3hot D3cold
[    0.402479] pci 0000:06:06.0: PME# disabled
[    0.402535] pci 0000:06:07.0: reg 10: [mem 0xb0116000-0xb0116fff]
[    0.402567] pci 0000:06:07.0: supports D1 D2
[    0.402570] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402578] pci 0000:06:07.0: PME# disabled
[    0.402632] pci 0000:06:07.2: reg 10: [mem 0xb0117000-0xb01177ff]
[    0.402649] pci 0000:06:07.2: reg 14: [mem 0xb0110000-0xb0113fff]
[    0.402750] pci 0000:06:07.2: supports D1 D2
[    0.402754] pci 0000:06:07.2: PME# supported from D0 D1 D2 D3hot
[    0.402761] pci 0000:06:07.2: PME# disabled
[    0.402813] pci 0000:06:07.3: reg 10: [mem 0xb0114000-0xb0115fff]
[    0.403013] pci 0000:06:07.3: supports D1 D2
[    0.403016] pci 0000:06:07.3: PME# supported from D0 D1 D2 D3hot
[    0.403024] pci 0000:06:07.3: PME# disabled
[    0.403083] pci 0000:06:08.0: reg 10: [mem 0xb0118000-0xb0118fff]
[    0.403195] pci 0000:06:08.0: PME# supported from D0 D3hot D3cold
[    0.403202] pci 0000:06:08.0: PME# disabled
[    0.403258] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.403371] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.403378] pci 0000:00:1e.0:   bridge window [mem 0xb0100000-0xb01fffff]
[    0.403389] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.403393] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.403398] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.403457] pci_bus 0000:07: [bus 07-08] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.403659] pci_bus 0000:00: on NUMA node 0
[    0.403665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.403930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.404026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.404150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.411060] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.411666] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.412356] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.413073] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.413668] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.414387] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.415087] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.415809] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.416546] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.416725] vgaarb: loaded
[    0.417104] SCSI subsystem initialized
[    0.417245] libata version 3.00 loaded.
[    0.417521] usbcore: registered new interface driver usbfs
[    0.417698] usbcore: registered new interface driver hub
[    0.417874] usbcore: registered new device driver usb
[    0.418350] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.418459] PCI: Using ACPI for IRQ routing
[    0.418562] PCI: pci_cache_line_size set to 64 bytes
[    0.418672] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.418678] reserve RAM buffer: 000000007f670000 - 000000007fffffff
[    0.419095] cfg80211: Calling CRDA to update world regulatory domain
[    0.419454] hpet clockevent registered
[    0.419461] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.419577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.419820] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.423031] Switching to clocksource tsc
[    0.427626] pnp: PnP ACPI init
[    0.427741] ACPI: bus type pnp registered
[    0.430980] pnp: PnP ACPI: found 10 devices
[    0.431085] ACPI: ACPI bus type pnp unregistered
[    0.431204] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.431313] system 00:01: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.431423] system 00:01: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.431533] system 00:01: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.431643] system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.431754] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.431882] system 00:04: [io  0x0680-0x06ff] has been reserved
[    0.431990] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.432098] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.432205] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.432313] system 00:04: [io  0x1600-0x167f] has been reserved
[    0.467150] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[    0.467319] pci 0000:00:1c.0: BAR 8: assigned [mem 0x84000000-0x841fffff]
[    0.467430] pci 0000:00:1c.0: BAR 9: assigned [mem 0x84200000-0x843fffff 64bit pref]
[    0.467596] pci 0000:00:1c.1: BAR 8: assigned [mem 0x84400000-0x845fffff]
[    0.467708] pci 0000:00:1c.1: BAR 9: assigned [mem 0x84600000-0x847fffff 64bit pref]
[    0.467880] pci 0000:00:1c.2: BAR 8: assigned [mem 0x84800000-0x849fffff]
[    0.467991] pci 0000:00:1c.2: BAR 9: assigned [mem 0x84a00000-0x84bfffff 64bit pref]
[    0.468159] pci 0000:00:02.1: BAR 0: assigned [mem 0x84c00000-0x84c7ffff]
[    0.468271] pci 0000:00:02.1: BAR 0: set to [mem 0x84c00000-0x84c7ffff] (PCI address [0x84c00000-0x84c7ffff]
[    0.468445] pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
[    0.468554] pci 0000:00:1c.1: BAR 7: assigned [io  0x3000-0x3fff]
[    0.468663] pci 0000:00:1c.2: BAR 7: assigned [io  0x4000-0x4fff]
[    0.468771] pci 0000:00:1e.0: BAR 7: assigned [io  0x5000-0x5fff]
[    0.468883] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[    0.468990] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.469101] pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff]
[    0.469215] pci 0000:00:1c.0:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
[    0.469389] pci 0000:00:1c.1: PCI bridge to [bus 0a-0a]
[    0.469495] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.469608] pci 0000:00:1c.1:   bridge window [mem 0x84400000-0x845fffff]
[    0.469721] pci 0000:00:1c.1:   bridge window [mem 0x84600000-0x847fffff 64bit pref]
[    0.469897] pci 0000:00:1c.2: PCI bridge to [bus 02-04]
[    0.470004] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.470116] pci 0000:00:1c.2:   bridge window [mem 0x84800000-0x849fffff]
[    0.470230] pci 0000:00:1c.2:   bridge window [mem 0x84a00000-0x84bfffff 64bit pref]
[    0.470405] pci 0000:06:07.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[    0.470570] pci 0000:06:07.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
[    0.470680] pci 0000:06:07.0: BAR 7: assigned [io  0x5000-0x50ff]
[    0.470788] pci 0000:06:07.0: BAR 8: assigned [io  0x5400-0x54ff]
[    0.470897] pci 0000:06:07.0: CardBus bridge to [bus 07-08]
[    0.471004] pci 0000:06:07.0:   bridge window [io  0x5000-0x50ff]
[    0.471115] pci 0000:06:07.0:   bridge window [io  0x5400-0x54ff]
[    0.471226] pci 0000:06:07.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.471395] pci 0000:06:07.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.471507] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.471615] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
[    0.471728] pci 0000:00:1e.0:   bridge window [mem 0xb0100000-0xb01fffff]
[    0.471844] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.472024] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.472140] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.472256] pci 0000:00:1c.0: setting latency timer to 64
[    0.472268] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.472378] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.472493] pci 0000:00:1c.1: setting latency timer to 64
[    0.472505] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.472616] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.472729] pci 0000:00:1c.2: setting latency timer to 64
[    0.472740] pci 0000:00:1e.0: setting latency timer to 64
[    0.472756] pci 0000:06:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.472874] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.472878] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.472882] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.472887] pci_bus 0000:09: resource 1 [mem 0x84000000-0x841fffff]
[    0.472891] pci_bus 0000:09: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[    0.472895] pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
[    0.472899] pci_bus 0000:0a: resource 1 [mem 0x84400000-0x845fffff]
[    0.472904] pci_bus 0000:0a: resource 2 [mem 0x84600000-0x847fffff 64bit pref]
[    0.472908] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.472912] pci_bus 0000:02: resource 1 [mem 0x84800000-0x849fffff]
[    0.472917] pci_bus 0000:02: resource 2 [mem 0x84a00000-0x84bfffff 64bit pref]
[    0.472921] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.472925] pci_bus 0000:06: resource 1 [mem 0xb0100000-0xb01fffff]
[    0.472929] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.472934] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.472938] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.472942] pci_bus 0000:07: resource 0 [io  0x5000-0x50ff]
[    0.472946] pci_bus 0000:07: resource 1 [io  0x5400-0x54ff]
[    0.472950] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.472954] pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
[    0.473009] NET: Registered protocol family 2
[    0.473194] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.473603] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.474998] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.475954] TCP: Hash tables configured (established 131072 bind 65536)
[    0.476066] TCP reno registered
[    0.476172] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.476300] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.476592] NET: Registered protocol family 1
[    0.476914] RPC: Registered udp transport module.
[    0.477021] RPC: Registered tcp transport module.
[    0.477122] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.477251] pci 0000:00:02.0: Boot video device
[    0.477413] PCI: CLS 32 bytes, default 64
[    0.477621] Simple Boot Flag at 0x36 set to 0x1
[    0.478519] microcode: no support for this CPU vendor
[    0.509395] highmem bounce pool size: 64 pages
[    0.509515] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.515395] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.515899] NTFS driver 2.1.29 [Flags: R/W].
[    0.516356] msgmni has been set to 1724
[    0.518601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.518776] io scheduler noop registered
[    0.518957] io scheduler cfq registered (default)
[    0.528055] Linux agpgart interface v0.103
[    0.528217] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    0.529096] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    0.532789] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.533008] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    0.533178] Hangcheck: Using getrawmonotonic().
[    0.533624] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.533900] ACPI: Lid Switch [LID]
[    0.534103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.534275] ACPI: Power Button [PWRB]
[    0.534469] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.534638] ACPI: Sleep Button [SLPB]
[    0.534850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.535018] ACPI: Power Button [PWRF]
[    0.536177] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    0.536352] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    0.536521] ACPI: acpi_idle registered with cpuidle
[    0.536685] Marking TSC unstable due to TSC halts in idle
[    0.536816] Switching to clocksource hpet
[    0.546064] thermal LNXTHERM:01: registered as thermal_zone0
[    0.546181] ACPI: Thermal Zone [THRM] (53 C)
[    0.546391] [drm] Initialized drm 1.1.0 20060810
[    0.546522] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.546636] i915 0000:00:02.0: setting latency timer to 64
[    0.551256] [drm] set up 7M of stolen space
[    0.997509] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+memwns=io+mem
[    0.998117] [drm] initialized overlay support
[    1.719706] Console: switching to colour frame buffer device 160x50
[    1.725305] fb0: inteldrmfb frame buffer device
[    1.725354] drm: registered panic notifier
[    1.725408] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.726852] loop: module loaded
[    1.727336] ata_piix 0000:00:1f.1: version 2.13
[    1.727359] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.727493] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.727610] scsi0 : ata_piix
[    1.727842] scsi1 : ata_piix
[    1.728156] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    1.728232] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    1.728534] ata2: port disabled. ignoring.
[    1.728624] tg3.c:v3.113 (August 2, 2010)
[    1.728686] tg3 0000:06:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.792881] tg3 0000:06:06.0: eth0: Tigon3 [partno(BCM95705A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:a1:ea:bb
[    1.792998] tg3 0000:06:06.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
[    1.793107] tg3 0000:06:06.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.793190] tg3 0000:06:06.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[    1.793327] PPP generic driver version 2.4.2
[    1.793516] PPP Deflate Compression module registered
[    1.793573] PPP BSD Compression module registered
[    1.793858] PPP MPPE Compression module registered
[    1.793912] NET: Registered protocol family 24
[    1.796660] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k
[    1.799062] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[    1.801553] ipw2200 0000:06:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.804025] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[    1.884190] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    1.886555] ata1.00: 312581808 sectors, multi 16: LBA48
[    1.894063] ata1.00: configured for UDMA/100
[    1.907178] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[    1.909819] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.912251] sd 0:0:0:0: [sda] Write Protect is off
[    1.914576] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.914613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.917420] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.031381]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    2.034464] sd 0:0:0:0: [sda] Attached SCSI disk
[   62.816116] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[   62.818491] ipw2200: Unable to load firmware: -2
[   62.820843] ipw2200: failed to register network device
[   62.823227] ipw2200 0000:06:08.0: PCI INT A disabled
[   62.825558] ipw2200: probe of 0000:06:08.0 failed with error -5
[   62.827893] libipw: 802.11 data/management/control stack, git-1.1.13
[   62.830188] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   62.832591] yenta_cardbus 0000:06:07.0: CardBus bridge found [1025:0067]
[   62.834952] yenta_cardbus 0000:06:07.0: Enabling burst memory read transactions
[   62.837338] yenta_cardbus 0000:06:07.0: Using CSCINT to route CSC interrupts to PCI
[   62.839732] yenta_cardbus 0000:06:07.0: Routing CardBus interrupts to PCI
[   62.842112] yenta_cardbus 0000:06:07.0: TI: mfunc 0x01c21b22, devctl 0x64
[   63.067912] yenta_cardbus 0000:06:07.0: ISA IRQ mask 0x0cf8, PCI irq 18
[   63.070247] yenta_cardbus 0000:06:07.0: Socket status: 30000006
[   63.072562] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #08
[   63.075383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   63.077736] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   63.080155] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   63.080161] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   63.082607] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   63.085049] ehci_hcd 0000:00:1d.7: debug port 1
[   63.091294] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   63.091318] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
[   63.103022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   63.105521] hub 1-0:1.0: USB hub found
[   63.107747] hub 1-0:1.0: 8 ports detected
[   63.110098] uhci_hcd: USB Universal Host Controller Interface driver
[   63.112367] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   63.114633] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   63.114639] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   63.116958] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   63.119255] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[   63.121743] hub 2-0:1.0: USB hub found
[   63.123979] hub 2-0:1.0: 2 ports detected
[   63.126277] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   63.128544] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   63.128550] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   63.130844] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[   63.133137] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[   63.135575] hub 3-0:1.0: USB hub found
[   63.137761] hub 3-0:1.0: 2 ports detected
[   63.140001] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   63.142225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   63.142230] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   63.144486] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[   63.146712] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[   63.149111] hub 4-0:1.0: USB hub found
[   63.151210] hub 4-0:1.0: 2 ports detected
[   63.153377] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[   63.155516] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   63.155522] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   63.157676] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[   63.159823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[   63.162178] hub 5-0:1.0: USB hub found
[   63.164265] hub 5-0:1.0: 2 ports detected
[   63.166532] usbcore: registered new interface driver usblp
[   63.168623] Initializing USB Mass Storage driver...
[   63.170771] usbcore: registered new interface driver usb-storage
[   63.172841] USB Mass Storage support registered.
[   63.175086] PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[   63.180489] serio: i8042 KBD port at 0x60,0x64 irq 1
[   63.182637] serio: i8042 AUX port at 0x60,0x64 irq 12
[   63.184982] mice: PS/2 mouse device common for all mice
[   63.187757] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[   63.189948] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   63.192129] i2c /dev entries driver
[   63.194649] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   63.196773] ACPI: resource 0000:00:1f.3 [io  0x18e0-0x18ff] conflicts with ACPI region SMBI [??? 0x000018e0-0x000018ef flags 0x49]
[   63.199043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   63.201365] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   63.203788] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   63.206225] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   63.208902] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   63.211570] cpuidle: using governor ladder
[   63.214411] cpuidle: using governor menu
[   63.217626] usbcore: registered new interface driver hiddev
[   63.220062] usbcore: registered new interface driver usbhid
[   63.222380] usbhid: USB HID core driver
[   63.224775] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   63.227334] HDA Intel 0000:00:1b.0: irq 296 for MSI/MSI-X
[   63.227376] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   63.227431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[   63.246327] ALSA device list:
[   63.248791]   #0: HDA Intel at 0xd000c000 irq 296
[   63.251455] oprofile: using NMI interrupt.
[   63.253960] Netfilter messages via NETLINK v0.30.
[   63.256356] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   63.259240] ctnetlink v0.93: registering with nfnetlink.
[   63.262534] ip_tables: (C) 2000-2006 Netfilter Core Team
[   63.265070] TCP cubic registered
[   63.267610] NET: Registered protocol family 17
[   63.269984] lib80211: common routines for IEEE802.11 drivers
[   63.272432] lib80211_crypt: registered algorithm 'NULL'
[   63.272436] lib80211_crypt: registered algorithm 'WEP'
[   63.272439] lib80211_crypt: registered algorithm 'CCMP'
[   63.272441] lib80211_crypt: registered algorithm 'TKIP'
[   63.272488] Using IPI Shortcut mode
[   63.568039] usb 3-1: new low speed USB device using uhci_hcd and address 2
[   63.750378] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6
[   63.753302] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0
[   63.880977] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0
[   63.920400] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   63.960229] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   63.962878] VFS: Mounted root (ext4 filesystem) readonly on device 8:8.
[   63.965539] Freeing unused kernel memory: 412k freed
[   64.493470] consoletype used greatest stack depth: 6740 bytes left
[   64.536029] stty used greatest stack depth: 6428 bytes left
[   64.578131] grep used greatest stack depth: 6368 bytes left
[   64.983435] touch used greatest stack depth: 6344 bytes left
[   65.283488] udev: starting version 151
[   65.283576] udevd (1056): /proc/1056/oom_adj is deprecated, please use /proc/1056/oom_score_adj instead.
[   66.579040] udevd used greatest stack depth: 6276 bytes left
[   67.133470] EXT4-fs (sda8): re-mounted. Opts: (null)
[   67.194576] mount used greatest stack depth: 6036 bytes left
[   68.119413] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[   68.200310] Adding 1004024k swap on /dev/sda9.  Priority:-1 extents:1 across:1004024k
[   79.598256] tg3 0000:06:06.0: eth0: Link is up at 100 Mbps, full duplex
[   79.598262] tg3 0000:06:06.0: eth0: Flow control is off for TX and off for RX
[  303.085724] synaptics: using relaxed packet validation
[  906.666683] wget used greatest stack depth: 5892 bytes left
[  912.151860] wget used greatest stack depth: 5336 bytes left
[ 3025.773792] X used greatest stack depth: 5244 bytes left
[ 3337.507889] mv used greatest stack depth: 5196 bytes left
[ 6626.477256] mv used greatest stack depth: 5156 bytes left
[146179.750071] usb 3-1: USB disconnect, address 2

启动过程中在
[    2.034464] sd 0:0:0:0: [sda] Attached SCSI disk
时会卡住近一分钟,接着才往下进行,一直到进入系统,
请帮忙分析一下,是什么原因?
发表于 2010-12-31 10:47:54 | 显示全部楼层
1.选择archi了没有
2.看看kernel的ata-sata部分
回复 支持 反对

使用道具 举报

 楼主| 发表于 2011-1-7 10:00:37 | 显示全部楼层
谢谢,我的kernel中sata-ata部分如下:
---Serial ATA and Parallel ATA drivers
  • ATA ACPI Support
  • AHCI SATA support
  • ATA SFF support
  • Intel ESB,ICH,PIIX3,PIIX4 PATA/SATA support
  • Intel PATA old PIIX support
  • Intel PATA MPIIX support
  • Generic ATA support

    现在还是在启动时[ 2.034464] sd 0:0:0:0: [sda] Attached SCSI disk 卡住近一分钟,请问一下要怎么解决?
  • 回复 支持 反对

    使用道具 举报

    发表于 2011-1-7 19:17:00 | 显示全部楼层
    我给别人装最新的kubuntu的时候,进系统也卡了1分多,也是ata接口的相关问题造成的,后来偶然拔掉光驱,只留硬盘,kubuntu顺利启动不再卡,估计是硬件接口有问题
    回复 支持 反对

    使用道具 举报

     楼主| 发表于 2011-1-31 15:38:23 | 显示全部楼层
    原来是ipw2200的原因造成的,现在把ipw2200编译成模块加载,问题就解决了,谢谢各位
    回复 支持 反对

    使用道具 举报

    您需要登录后才可以回帖 登录 | 注册

    本版积分规则

    快速回复 返回顶部 返回列表