debian lenny 安装后分辨率错误无法显示

apzc2529

Post by loki;2088464
请问在哪个网站可以查出来显示器的水平和垂直频率，谢谢！！

显示器的手册上，或者是显示器官方网站

yanzhongsan

终于弄好了，上网，中文……现在就是在DEBIAN下回帖，正在由于要不要装个ATI的驱动，就怕一装害我又要重装……

谢谢blue

yanzhongsan

Post by blue_stone;2088371
你用了什么驱动?

现还没有装驱动，我只是在xorg.conf中设置了1024x768@60就起来了。

幸亏在图形界面下把网络配置好了，那个apt- get autoremove 几乎把我整个系统删空，害我在命令行下重装了gdm,gnome才又起来……

yanzhongsan

刚刚从ATI的网站下宰了驱动，发现无法安装……信息如下

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

debian:/home/yanzhongsan/Downloads# sh ati-driver-installer-10-4-x86.x86_64.run --buildpkg Debian/lenny
Created directory fglrx-install.QXSLlu
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.723....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Debian/lenny
cp: cannot stat `/home/yanzhongsan/Downloads/fglrx-install.QXSLlu/x710/*': No such file or directory
Package build failed!
Package build utility output:
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 8.723-1
dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html>
debian/rules build
dpkg-buildpackage: host architecture i386
dh_testdir
make: dh_testdir: Command not found
make: *** [build] Error 127
dpkg-buildpackage: failure: debian/rules build gave error exit status 2
Removing temporary directory: fglrx-install.QXSLlu
debian:/home/yanzhongsan/Downloads#

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

请问这是怎么回事？

potatofamily

Post by yanzhongsan;2088514
刚刚从ATI的网站下宰了驱动，发现无法安装……信息如下

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

debian:/home/yanzhongsan/Downloads# sh ati-driver-installer-10-4-x86.x86_64.run --buildpkg Debian/lenny
Created directory fglrx-install.QXSLlu
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.723....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Debian/lenny
cp: cannot stat `/home/yanzhongsan/Downloads/fglrx-install.QXSLlu/x710/*': No such file or directory
Package build failed!
Package build utility output:
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package fglrx-installer
dpkg-buildpackage: source version 8.723-1
dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html>
debian/rules build
dpkg-buildpackage: host architecture i386
dh_testdir
make: dh_testdir: Command not found
make: *** [build] Error 127
dpkg-buildpackage: failure: debian/rules build gave error exit status 2
Removing temporary directory: fglrx-install.QXSLlu
debian:/home/yanzhongsan/Downloads#

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

请问这是怎么回事？

没有dh_testdir这个命令，你需要安装debhelper, 你还需要安装dpkg-dev， libc6-dev等包