xfce4下的蓝牙文件传输

luyaotang

在XFCE4环境下什么好的工具来进行文件传输？不要用gnome-bluetooth,就是不想用gnome的桌面环境才换到XFCE4下的。即使是用命令行的也行。
目前用obex_test的时候出错了，有遇到过这种情况的人出来说 一下。
bash-4.0# hciconfig -a
hci0:        Type: USB
        BD Address: 00:1A:7D:0A:C1:5C ACL MTU: 1017:8 SCO MTU: 64:0
        UP RUNNING PSCAN
        RX bytes:18744089 acl:50202 sco:0 events:28603 errors:0
        TX bytes:7581677 acl:51074 sco:0 commands:464 errors:0
        Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'localhost-0'
        Class: 0x4a0104
        Service Classes: Networking, Capturing, Telephony
        Device Class: Computer, Desktop workstation
        HCI Ver: 2.0 (0x3) HCI Rev: 0x4000 LMP Ver: 2.0 (0x3) LMP Subver: 0x430e
        Manufacturer: Broadcom Corporation (15)

bash-4.0# hciconfig hci0 up
bash-4.0# hcitool  scan
Scanning ...
        00:1B:59:A6:A1:36        K810i
bash-4.0# sdptool search OPUSH
Inquiring ...
Searching for OPUSH on 00:1B:59:A6:A1:36 ...
Service Name: OBEX Object Push
Service RecHandle: 0x1000b
Service Class ID List:
  "OBEX Object Push" (0x1105)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 6
  "OBEX" (0x0008)
Profile Descriptor List:
  "OBEX Object Push" (0x1105)
    Version: 0x0100

bash-4.0# obex_test -b 00:1B:59:A6:A1:36 6
Using Bluetooth RFCOMM transport
OBEX Interactive test client/server.
> c
Made some progress...
Server request finished!
server_done() Command (00) has now finished
Timeout waiting for data. Aborting

总的来说就是用obex_test 在连接的时候总是连接不上。

luyaotang

我是超级玛利，自己顶一下。