RT73驱动编译

sabrinamen

我想要把驱动编译到开发板上,,make config的时候一切顺利,到了make all的时候出现如下错误:
[root@sabrina rt73]# make all
arm-linux-gcc -D__KERNEL__ -I/usr/src/linux-2.4.22-1.2115.nptl/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include /usr/src/linux-2.4.22-1.2115.nptl/include/linux/modversions.h -DDBG -Wall -Wstrict-prototypes -Wno-trigraphs -DRALINK_WPA_SUPPLICANT_SUPPORT -DBLOCK_NET_IF   -c -o rtmp_main.o rtmp_main.c
Assembler messages:
Error: unknown architecture `i686'

cc1: error: invalid option `preferred-stack-boundary=2'
rtmp_main.c:1: error: bad value (i686) for -march= switch
make: *** [rtmp_main.o] Error 1
生不成.o文件,这是为什么呢?请高手指教!!!