LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
12
返回列表 发新帖
楼主: jefferson.qian

NTFS-3G稳定马?

[复制链接]
发表于 2008-12-11 00:46:06 | 显示全部楼层
试试ntfsmount吧,现在也支持写入了,而且占用cpu比ntfs-3g小很多。
回复 支持 反对

使用道具 举报

发表于 2008-12-11 09:36:33 | 显示全部楼层
我想说的也是ntfsmount,不过好像容错能力没有ntfs-3g强,貌似非法关机或者什么的就会出问题,挂不上了,要到windows去检查一下才能进,但是cpu占用真的小很多。

NTFS-3G别说大文件了吧

我机器配置签名里有写,我用eclipse添加150M 包含 6434个文件的项目目录

windows下面就几秒能恢复相应,CPU占用也不高

但是用ntfs-3g。。。。。整一个核心的CPU全占掉了,eclipse无响应大概1,2分钟 扫描完成后才恢复,不过最近的工作都要在windows下完成,也没怎么弄linux了,有空再把ntfsmount装回去看看
回复 支持 反对

使用道具 举报

发表于 2008-12-11 09:39:33 | 显示全部楼层
我的配置还可以,所以使用ntfs-3g拷贝大文件没什么感觉到迟缓。

内核里面的ntfs支持因为写入那里描述为“实验性”,所以基本上不敢试用。
回复 支持 反对

使用道具 举报

发表于 2008-12-11 22:24:03 | 显示全部楼层
就是效率很低……
回复 支持 反对

使用道具 举报

发表于 2008-12-11 23:15:53 | 显示全部楼层
Post by xsam;1922331
我的配置还可以,所以使用ntfs-3g拷贝大文件没什么感觉到迟缓。

内核里面的ntfs支持因为写入那里描述为“实验性”,所以基本上不敢试用。

CONFIG_NTFS_RW:

This enables [color="urple"]the partial, but safe, write support in the NTFS driver.

[color="urple"]The only supported operation is [color="Red"]overwriting existing files, without changing the file length.  [color="urple"]No file or directory creation, deletion or enaming is possible.  Note [color="urple"]only non-resident files can be written to so you may find that [color="Red"]some very small files (<500 bytes or so) cannot be written to.

While we cannot guarantee that it will not damage any data, [color="DarkRed"]we have so far not received a single report where the driver would have damaged someones data so we assume it is perfectly safe to use.

Note:  [color="Red"]While write support is safe in this version (a rewrite from scratch of the NTFS support), it should be noted that the old NTFS write support, included in Linux 2.5.10 and before (since 1997), is not safe.

This is currently useful with TopologiLinux.  TopologiLinux is run on top of any DOS/Microsoft Windows system without partitioning your hard disk.  Unlike other Linux distributions TopologiLinux does not need its own partition.  For more information see <http://topologi-linux.sourceforge.net/>

It is perfectly safe to say N here.


看来你没仔细看吧。
回复 支持 反对

使用道具 举报

发表于 2008-12-12 00:02:14 | 显示全部楼层
Post by xsam;1922331
我的配置还可以,所以使用ntfs-3g拷贝大文件没什么感觉到迟缓。

内核里面的ntfs支持因为写入那里描述为“实验性”,所以基本上不敢试用。

现在ntfsmount用的也是fuse,并不是内核的ntfs支持。
回复 支持 反对

使用道具 举报

发表于 2008-12-12 09:09:22 | 显示全部楼层
cpu够强就可以毫无顾忌的选用nfts-3g。

不过我很久没编译过内核了,所以不是很清楚ntfs的支持程度。如果有一天内核可以完美支持,ntfs-3g就没有存在的必要了。

对于ntfs-3g,我在使用过程中遇到的问题是,如果在Linux不正常关机,重启后进入Linux系统,ntfs分区是不会挂载的。要用-o force选项或回到win系统下检查文件系统。
回复 支持 反对

使用道具 举报

发表于 2008-12-12 09:21:26 | 显示全部楼层
-  -要多强?

顾忌到是没什么好顾忌的,但那个龟速还真不是很能接受
回复 支持 反对

使用道具 举报

发表于 2008-12-12 19:17:17 | 显示全部楼层
ntfs-3g 是运行在用户空间的程序, 当然慢了。 能达到kernel模式的一半就不错了。
回复 支持 反对

使用道具 举报

发表于 2008-12-12 19:29:30 | 显示全部楼层
fuse.ntfs 貌似就是用的 ntfsmount 吧?

我刚试了一下  在eclipse 添加同样的项目 mount.fuse.ntfs 只占用了最多21%的CPU资源

时间也只用了20秒左右
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表