教育网设置IP

kingoftime3

我用的是教育网，前几天刚装上debian,就装了第一张盘，里边没有setup命令，怎么办？

springwind426

vi /etc/network/interfaces

kingoftime3

interfaces怎么改?里边有auto=lo

gradetwo

怀疑你的网卡有没有识别
lspci看下

kingoftime3

怎么算是识别了？lspci:
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation Mobile SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 05)
03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Broadcom Corporation Unknown device 1713 (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

kingoftime3

09:00.0 Ethernet controller: Broadcom Corporation Unknown device 1713 (rev 02)的确决识别，怎么让它识别？
我的显卡似乎也没跑起来01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1)

wazup

Post by kingoftime3;1820496
interfaces怎么改?里边有auto=lo

用 man interfaces 可以查到，大概就像这样：

1. 
   
2. # We always want the loopback interface.
   
3. #
   
4. auto lo
   
5. iface lo inet loopback
   
6. 
   
7. # An example ethernet card setup: (broadcast and gateway are optional)
   
8. #
   
9. auto eth0
   
10. iface eth0 inet static
    
11.     address 192.168.0.42
    
12.     network 192.168.0.0
    
13.     netmask 255.255.255.0
    
14.     broadcast 192.168.0.255
    
15.     gateway 192.168.0.1
    

复制代码

里面的 IP 地址，子网掩码等按你的来写
之后用 ifup eth0 来启动
以后重启不需要这样手动启动了
因为我们在 interfaces 文件里面写了 auto eth0

wazup

Post by kingoftime3;1820534
09:00.0 Ethernet controller: Broadcom Corporation Unknown device 1713 (rev 02)的确决识别，怎么让它识别？
我的显卡似乎也没跑起来01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1)

看来你装的系统里面没带这款网卡的驱动
可能要到官网下载相应的网卡驱动才行了