双系统中分区安装LFS 6.3启动出现问题，路过的来看看！

djstava

写错了，是root (hd0,8)
sda9改为hda9（不明白发行版明明是sda9,不改为sda9的话，又出现错误提示你选择分区,全是hda*）,上面的错误消失(运行已通过)，又出现第一楼的错误：
udevd-event[1921]:run_program: '/sbin/modprobe' abnormal exit
udevd-event[1927]:run_program: '/sbin/modprobe' abnormal exit
udevd-event[1930]:run_program: '/sbin/modprobe' abnormal exit

fsck.ext3: No such file or directory while trying to open /dev/sda9,
/dev/sda9: The superblock could not be read or does not describe a correct ext2 filesystem.If the device is valid and it really contains an ext2 filesystem,then the superblock is corrupt,and you might try running e2fsck with an alternate superblock:e2fsck -b 8139 <device> [FAIL]
FAILURE:

File system errors were encoutered that could not be fixed automatically.This system connot continue to boot and will therefore be halted until those errors are fixed manully by a System Administrator.
无语中。。。

djstava

写错了，是root (hd0,8)
sda9改为hda9（不明白发行版明明是sda9,不改为sda9的话，又出现错误提示你选择分区,全是hda*）,上面的错误消失(运行已通过)，又出现第一楼的错误：
udevd-event[1921]:run_program: '/sbin/modprobe' abnormal exit
udevd-event[1927]:run_program: '/sbin/modprobe' abnormal exit
udevd-event[1930]:run_program: '/sbin/modprobe' abnormal exit

fsck.ext3: No such file or directory while trying to open /dev/sda9,
/dev/sda9: The superblock could not be read or does not describe a correct ext2 filesystem.If the device is valid and it really contains an ext2 filesystem,then the superblock is corrupt,and you might try running e2fsck with an alternate superblock:e2fsck -b 8139 <device> [FAIL]
FAILURE:

File system errors were encoutered that could not be fixed automatically.This system connot continue to boot and will therefore be halted until those errors are fixed manully by a System Administrator.
无语中。。。

djstava

重编Module-Init-Tools-3.2.2,modprobe错误消失：
fsck.ext3: No such file or directory while trying to open /dev/sda9,
/dev/sda9: The superblock could not be read or does not describe a correct ext2 filesystem.If the device is valid and it really contains an ext2 filesystem,then the superblock is corrupt,and you might try running e2fsck with an alternate superblock:e2fsck -b 8139 <device> [FAIL]
FAILURE:

File system errors were encoutered that could not be fixed automatically.This system connot continue to boot and will therefore be halted until those errors are fixed manully by a System Administrator.

hohoxu_hao115

/etc/fstab也要改。不过你要确认你的分区到底应该是hda9还是sda9，是pata硬盘还是sata硬盘。
如果用libata驱动，不管什么硬盘都是sda*，如果是用的ide驱动，pata硬盘是hda*，sata硬盘只能用libata驱动，是sda*。

djstava

谢谢楼上各位。