Xorg -configure出现错误

mylife_linux

错误如下：
lfs [ ~/xc ]$ cat /var/log/Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Dennis.Wang:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.6.22.12 i686
Current Operating System: Linux Dennis.Wang 2.6.22.12 #1 Fri Nov 9 14:44:43 Local time zone must be set--see zic manua i686
Build Date: 09 November 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov  9 19:58:56 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c49c0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.1
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/X11/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1043,1117 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,2668 card 1043,1114 rev 04 class 04,03,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,2658 card 1043,1117 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1043,1117 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1043,1117 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1043,1117 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1043,1117 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2641 card 1043,1117 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1043,1117 rev 04 class 01,01,8a hdr 00
(II) PCI: 01:00:0: chip 1002,5653 card 1043,11b2 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 10ec,8139 card 1043,1045 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 1180,0476 card d000,0000 rev b3 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 1180,0552 card 1043,1117 rev 08 class 0c,00,10 hdr 80
(II) PCI: 02:01:2: chip 1180,0822 card 1043,1117 rev 17 class 08,05,00 hdr 80
(II) PCI: 02:01:3: chip 1180,0592 card 1043,1117 rev 08 class 08,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1  0       0x0000a000 - 0x0000cfff (0x3000) IX
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0       0xfe900000 - 0xfe9fffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xcff00000 - 0xdfefffff (0x10000000) MX
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1  0       0x0000d000 - 0x0000d0ff (0x100) IX
        [1] -1  0       0x0000d400 - 0x0000d4ff (0x100) IX
        [2] -1  0       0x0000d800 - 0x0000d8ff (0x100) IX
        [3] -1  0       0x0000dc00 - 0x0000dcff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
        [0] -1  0       0xfea00000 - 0xfeafffff (0x100000) MX
(II) Bus 2 prefetchable memory range:
        [0] -1  0       0x30000000 - 0x33ffffff (0x4000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x0180 (VGA_EN is cleared)
(II) Bus 3 I/O range:
        [0] -1  0       0x0000d000 - 0x0000d0ff (0x100) IX
        [1] -1  0       0x0000d400 - 0x0000d4ff (0x100) IX
(II) Bus 3 prefetchable memory range:
        [0] -1  0       0x30000000 - 0x33ffffff (0x4000000) MX
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/27, 0xfe9f0000/16, I/O @ 0xc000/8, BIOS @ 0xfe9c0000/17
Missing output drivers.  Configuration failed.

看看怎么回事。

drivel

我的Gentoo也有错误

$ sudo X -configure

X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.22-gentoo-r8botu i686
Current Operating System: Linux botu-Gentoo 2.6.22-gentoo-r8botu #8 Sat Oct 20 0 9:31:24 Local time zone must be set--see zic manu i686
Build Date: 10 November 2007 10:39:05AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 10 10:53:06 2007
List of video drivers:
s3
sis
radeon
tdfx
glint
voodoo
v4l
imstt
i810
tseng
r128
siliconmotion
tga
chips
sisusb
cirrus
rendition
via
mga
nv
savage
s3virge
i740
intel
ati
dummy
trident
vmware
i128
atimisc
fglrx
cyrix
ark
nsc
apm
neomagic
fbdev
vesa
vga

Backtrace:
0: X(xf86SigHandler+0x84) [0x80d1d64]
1: X(DoConfigure+0x20f) [0x80c9b2f]
2: X(InitOutput+0x62e) [0x80a8bde]

Fatal server error:
Caught signal 11. Server aborting

Aborted