gentoo2005 xorg總是啓動失敗

betatoy

#**********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath        "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
#    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "rotocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option        "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"        "xorg"
    Option "XkbModel"        "pc102"
    Option "XkbLayout"        "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"
    Option "rotocol"    "S/2"
    Option "Device"      "/dev/psaux"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "rotocol"        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "rotocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "LG 563LS"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.0 - 61.0

#    HorizSync        30-64         # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 56-75

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier        "Standard VGA"
    VendorName        "Unknown"
    BoardName        "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset        "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "CI:0:10:0"

#    VideoRam        256

#    Clocks        25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "nvidia geforce2 mx"
    Driver      "vga"
        # unsupported card
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "nvidia geforce2 mx"
    Monitor     "LG 563LS"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

betatoy

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11.8 i686 [ELF]
Current Operating System: Linux willamette 2.6.11.8 #1 Sun May 1 23:54:06 Local time zone must be set--see zic manua i686
Build Date: 02 May 2005
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May  2 18:35:54 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "LG 563LS"
(**) |   |-->Device "nvidia geforce2 mx"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/,/usr/share/fonts/local/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.7
        X.Org XInput driver : 0.4
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2530 card 8086,2530 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2532 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 8086,2442 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,2442 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 8086,2442 rev 04 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 8086,2442 rev 04 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0111 card 0000,0000 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:04:0: chip 1186,1300 card 1186,1303 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xec000000 - 0xedffffff (0x2000000) MX
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [1] -1        0        0x0000c400 - 0x0000c4ff (0x100) IX
        [2] -1        0        0x0000c800 - 0x0000c8ff (0x100) IX
        [3] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
        [0] -1        0        0xee000000 - 0xee0fffff (0x100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] rev 178, Mem @ 0xec000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
        [0] -1        0        0xee000000 - 0xee0000ff (0x100) MX
        [1] -1        0        0xe8000000 - 0xe7ffffff (0x0) MXO
        [2] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
        [3] -1        0        0xec000000 - 0xecffffff (0x1000000) MX(B)
        [4] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [5] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [6] -1        0        0x00005000 - 0x0000500f (0x10) IX
        [7] -1        0        0x0000d000 - 0x0000d01f (0x20) IX
        [8] -1        0        0x0000f000 - 0x0000f00f (0x10) IX
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xee000000 - 0xee0000ff (0x100) MX
        [1] -1        0        0xe8000000 - 0xe7ffffff (0x0) MXO
        [2] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
        [3] -1        0        0xec000000 - 0xecffffff (0x1000000) MX(B)
        [4] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [5] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [6] -1        0        0x00005000 - 0x0000500f (0x10) IX
        [7] -1        0        0x0000d000 - 0x0000d01f (0x20) IX
        [8] -1        0        0x0000f000 - 0x0000f00f (0x10) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xee000000 - 0xee0000ff (0x100) MX
        [6] -1        0        0xe8000000 - 0xe7ffffff (0x0) MXO
        [7] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
        [8] -1        0        0xec000000 - 0xecffffff (0x1000000) MX(B)
        [9] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [10] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [11] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [12] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [13] -1        0        0x00005000 - 0x0000500f (0x10) IX
        [14] -1        0        0x0000d000 - 0x0000d01f (0x20) IX
        [15] -1        0        0x0000f000 - 0x0000f00f (0x10) IX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.8.2, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "vga"
(II) Loading /usr/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 4.0.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.4
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xee000000 - 0xee0000ff (0x100) MX
        [6] -1        0        0xe8000000 - 0xe7ffffff (0x0) MXO
        [7] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
        [8] -1        0        0xec000000 - 0xecffffff (0x1000000) MX(B)
        [9] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [10] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [11] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [12] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [13] -1        0        0x00005000 - 0x0000500f (0x10) IX
        [14] -1        0        0x0000d000 - 0x0000d01f (0x20) IX
        [15] -1        0        0x0000f000 - 0x0000f00f (0x10) IX
(II) resource ranges after probing:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX(B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [5] -1        0        0xee000000 - 0xee0000ff (0x100) MX
        [6] -1        0        0xe8000000 - 0xe7ffffff (0x0) MXO
        [7] -1        0        0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
        [8] -1        0        0xec000000 - 0xecffffff (0x1000000) MX(B)
        [9] 0        0        0x000a0000 - 0x000affff (0x10000) MS
        [10] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS
        [11] 0        0        0x000b8000 - 0x000bffff (0x8000) MS
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX
        [14] -1        0        0x0000c000 - 0x0000c0ff (0x100) IX
        [15] -1        0        0x0000d400 - 0x0000d41f (0x20) IX
        [16] -1        0        0x00005000 - 0x0000500f (0x10) IX
        [17] -1        0        0x0000d000 - 0x0000d01f (0x20) IX
        [18] -1        0        0x0000f000 - 0x0000f00f (0x10) IX
        [19] 0        0        0x000003b0 - 0x000003bb (0xc) IS
        [20] 0        0        0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.7
(II) VGA(0): initializing int10.
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(EE) VGA(0): Driver can't support depth 24
(II) UnloadModule: "vga"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/modules/linux/libint10.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
         at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

troll

1. Driver can't support depth 24

复制代码

betatoy

那麽請問如何解決呢?

troll

vga这个驱动不支持24位色深，换成vesa或其它试试看。

betatoy

vesa已經被編譯到内核中了, 怎麽辦?

versace

用16位就是~

betatoy

16位也不行啊