LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 997|回复: 7

firefox无法启动的问题!!(以解决!!)

[复制链接]
发表于 2005-4-9 20:04:57 | 显示全部楼层 |阅读模式
在按照blfs的说明文挡,安装之后以root身份,启动!!
出现错误!!
说是run_mozilla.sh的159行出现segment错误!!
请高手指教!!
奇怪的是之前编译过一次,并没有出错!!谢谢!!


解决方法是,配置xorg的字体,方法参照blfs文档!!应该可以启动的!!

现在,再请教一个问题,是如果声卡的内核配置的时候,是配置成模块的,可以用alsa来驱动声卡
吗??谢谢!!以下是我的内核配置:
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set


# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_VIA82XX=m
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

可以装,只是要在系统加载声音模块之后,才可以!!前提的内核支持alsa!1
发表于 2005-4-9 21:41:54 | 显示全部楼层
我遇到跟你相同的错误。

至今尚未解决。我也是完全按照blfs做的。我都编了好多次了。

与你不同的是,我一次也没编成功。

捎带提一下,我的emacs 21.4 也编不成功。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-4-10 18:30:16 | 显示全部楼层
是否是因为安装了autofs的问题,还是文档的profile的设置的问题??之前的安装我没有安装autofs,请高手指点指点,看run_mozilla.sh的说明说是这是license文件是否是license的问题呀!!小弟这里先谢过了!!
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-4-10 19:00:51 | 显示全部楼层
不知道,还有没有人遇到这个问题,也请没有遇到问题的前辈,出来聊聊,编译的时候应该注意些什么??
回复 支持 反对

使用道具 举报

发表于 2005-5-20 10:40:32 | 显示全部楼层
I have the same run_mozilla.sh's line 159 issues, Even set fonts followed by BLFS6.0's  Setting up fonts section.

I use Opera 8.0 instead Eventually, it seems that Opera was built statically may cause less dependencies and errors


a moment......

Finally I discovered that you must correctly configured /etc/fonts/fonts.conf, otherwise firefox could not start. You may cp your distribution's fonts.conf to the destination. Do not forget backuping your original fonts.conf before overiding.
回复 支持 反对

使用道具 举报

发表于 2005-5-20 19:54:57 | 显示全部楼层
兄弟啊,是怎么解决的,帖出来,大家参考一下啊!
回复 支持 反对

使用道具 举报

发表于 2005-5-20 20:45:00 | 显示全部楼层
For my specifically Redflag 4.1 Desktop linux distribution

I backup the LFS's /etc/fonts/fonts.conf to /etc/fonts/fonts.conf.bak

then cp and override the LFS's /etc/fonts/fonts.conf with the one Redflag provided.(addressed at Redflag's /etc/fonts/fonts.conf)

Tested successfully Redflay 4.1 Desktop only! I don't know if other distributions would.

IMO it appears that the file /etc/fonts/fonts.conf need be set up further more, It is not the case using distribution's config files.You must learn how to manually handle this fonts.conf file given by Fontconfig package
回复 支持 反对

使用道具 举报

发表于 2005-5-23 10:00:16 | 显示全部楼层
楼主辛苦了!
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表