LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 876|回复: 6

各位老大这是什么问题(有箭头的地方)?

[复制链接]
游客  发表于 2003-6-12 14:05:08 |阅读模式
各位老大这是什么问题(有箭头的地方),我用的是mandrake,gnome2,
因为我不会用控制中心的那个网络配置,不知什么原因我配置好后,拨号时,modem
一点反映都没有(谁能教教我?),推荐一个gnome下的拨号软件给我吧,
Jun 11 01:18:08 localhost pppd[2489]: Hangup (SIGHUP)
Jun 11 01:18:08 localhost pppd[2489]: Exit.
Jun 11 01:26:10 localhost pppd[2515]: pppd 2.4.1 started by root, uid 0
Jun 11 01:26:11 localhost chat[2516]: timeout set to 3 seconds
Jun 11 01:26:11 localhost chat[2516]: abort on (\nBUSY\r)
Jun 11 01:26:11 localhost chat[2516]: abort on (\nNO ANSWER\r)
Jun 11 01:26:11 localhost chat[2516]: abort on (\nRINGING\r\n\r\nRINGING\r)
Jun 11 01:26:11 localhost chat[2516]: send (rAT^M)
Jun 11 01:26:11 localhost chat[2516]: expect (OK)
Jun 11 01:26:11 localhost chat[2516]: rAT^M^M
Jun 11 01:26:11 localhost chat[2516]: OK
Jun 11 01:26:11 localhost chat[2516]:  -- got it
Jun 11 01:26:11 localhost chat[2516]: send (ATH0^M)
Jun 11 01:26:11 localhost chat[2516]: timeout set to 30 seconds
Jun 11 01:26:11 localhost chat[2516]: expect (OK)
Jun 11 01:26:11 localhost chat[2516]: ^M
Jun 11 01:26:11 localhost chat[2516]: ATH0^M^M
Jun 11 01:26:11 localhost chat[2516]: OK
Jun 11 01:26:11 localhost chat[2516]:  -- got it
Jun 11 01:26:11 localhost chat[2516]: send (ATDT163^M)
Jun 11 01:26:11 localhost chat[2516]: expect (CONNECT)
Jun 11 01:26:11 localhost chat[2516]: ^M
Jun 11 01:26:30 localhost chat[2516]: ATDT163^M^M
Jun 11 01:26:30 localhost chat[2516]: CONNECT
Jun 11 01:26:30 localhost chat[2516]:  -- got it
Jun 11 01:26:30 localhost chat[2516]: send (^M)
Jun 11 01:26:30 localhost pppd[2515]: Serial connection established.
Jun 11 01:26:30 localhost pppd[2515]: Using interface ppp0
Jun 11 01:26:30 localhost pppd[2515]: Connect: ppp0 <--> /dev/ttyS1
Jun 11 01:26:30 localhost /etc/hotplug/net.agent: assuming ppp0 is already up         <---
Jun 11 01:27:01 localhost pppd[2515]: LCP: timeout sending Config-Requests                <---
Jun 11 01:27:01 localhost pppd[2515]: Connection terminated.                                <---       
Jun 11 01:27:01 localhost pppd[2515]: Receive serial link is not 8-bit clean:        <---
Jun 11 01:27:01 localhost pppd[2515]: Problem: all had bit 7 set to 0                        <---       
Jun 11 01:27:01 localhost /etc/hotplug/net.agent: NET unregister event not supported         <---
Jun 11 01:27:02 localhost pppd[2515]: Hangup (SIGHUP)
Jun 11 01:27:02 localhost pppd[2515]: Exit.
发表于 2003-6-12 22:33:37 | 显示全部楼层
你是否把modem接在com1上?
/dev/ttyS1应该是指com2
换个com2试试
发表于 2003-6-12 22:44:03 | 显示全部楼层

可以试试kppp

注意选择设备时选择正确的设备.

----突然感觉用pppoe拨adsl是那么幸福 ;)
游客  发表于 2003-6-12 23:42:09

这些都没错,我怀疑是hotplug

这些都没错,我怀疑是hotplug,hotplug是干什么的?
发表于 2003-6-13 00:53:37 | 显示全部楼层
说两句:
什么modem?
软猫的话安了驱动?用kppp了吗,建议是一下。

标题不明确,
老大这词滥用了。
游客  发表于 2003-6-13 08:46:10

我的是外置modem

我没用kppp,软件包名字是什么?
游客  发表于 2003-6-13 11:08:45

can use kppp!!!

but i like use gnome,i dont want to install kde,where can i download gnome-ppp?
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表