设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Gentoo Linux › fdisk unable to open /dev/sda...
返回列表 发新帖
查看: 3307|回复: 5

fdisk unable to open /dev/sda...

[复制链接]
ywwow
发表于 2009-10-10 20:54:37 | 显示全部楼层 |阅读模式
Recently I've got a disk read error when boot. I googled and considered it was a problem of corrupt MBR. So I booted from a livecd and tried to use "fdisk /mbr".
First I typed "fdisk /dev/sda". It replyed "unable to open /dev/sda". I checked the mount and had /dev/sda umounted. But then "fdisk /dev/sda" still responsed "unable to open /dev/sda". What would be possible wrong with my disk?

list is the "dmesg":

  2. [    0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
  3. [    0.000000] Initializing cgroup subsys cpuset
  4. [    0.000000] Initializing cgroup subsys cpu
  5. [    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
  6. [    0.000000] KERNEL supported cpus:
  7. [    0.000000]   Intel GenuineIntel
  8. [    0.000000]   AMD AuthenticAMD
  9. [    0.000000]   NSC Geode by NSC
  10. [    0.000000]   Cyrix CyrixInstead
  11. [    0.000000]   Centaur CentaurHauls
  12. [    0.000000]   Transmeta GenuineTMx86
  13. [    0.000000]   Transmeta TransmetaCPU
  14. [    0.000000]   UMC UMC UMC UMC
  15. [    0.000000] BIOS-provided physical RAM map:
  16. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  17. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  18. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  19. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
  20. [    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
  21. [    0.000000]  BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
  22. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  23. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  24. [    0.000000] DMI 2.2 present.
  25. [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
  26. [    0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000
  27. [    0.000000] Scanning 0 areas for low memory corruption
  28. [    0.000000] modified physical RAM map:
  29. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  30. [    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
  31. [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
  32. [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
  33. [    0.000000]  modified: 0000000000100000 - 00000000bfff0000 (usable)
  34. [    0.000000]  modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
  35. [    0.000000]  modified: 00000000bfff3000 - 00000000c0000000 (ACPI data)
  36. [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
  37. [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
  38. [    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
  39. [    0.000000] RAMDISK: 7f89c000 - 7ffff993
  40. [    0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
  41. [    0.000000] Move RAMDISK from 000000007f89c000 - 000000007ffff992 to 00881000 - 00fe4992
  42. [    0.000000] ACPI: RSDP 000F8020, 0014 (r0 Nvidia)
  43. [    0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  44. [    0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  45. [    0.000000] ACPI: DSDT BFFF3180, 5D5C (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
  46. [    0.000000] ACPI: FACS BFFF0000, 0040
  47. [    0.000000] ACPI: SSDT BFFF9000, 00D3 (r1 PTLTD  POWERNOW        1  LTP        1)
  48. [    0.000000] ACPI: MCFG BFFF9140, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  49. [    0.000000] ACPI: APIC BFFF8F40, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
  50. [    0.000000] ACPI: Local APIC address 0xfee00000
  51. [    0.000000] 2187MB HIGHMEM available.
  52. [    0.000000] 883MB LOWMEM available.
  53. [    0.000000]   mapped low ram: 0 - 373fe000
  54. [    0.000000]   low ram: 00000000 - 373fe000
  55. [    0.000000]   bootmap 00012000 - 00018e80
  56. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
  57. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  58. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  59. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  60. [    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
  61. [    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
  62. [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  63. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  64. [    0.000000]   #7 [0000881000 - 0000fe4993]      NEW RAMDISK ==> [0000881000 - 0000fe4993]
  65. [    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
  66. [    0.000000] found SMP MP-table at [c00f3ec0] 000f3ec0
  67. [    0.000000] Zone PFN ranges:
  68. [    0.000000]   DMA      0x00000010 -> 0x00001000
  69. [    0.000000]   Normal   0x00001000 -> 0x000373fe
  70. [    0.000000]   HighMem  0x000373fe -> 0x000bfff0
  71. [    0.000000] Movable zone start PFN for each node
  72. [    0.000000] early_node_map[2] active PFN ranges
  73. [    0.000000]     0: 0x00000010 -> 0x0000009f
  74. [    0.000000]     0: 0x00000100 -> 0x000bfff0
  75. [    0.000000] On node 0 totalpages: 786303
  76. [    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
  77. [    0.000000]   DMA zone: 32 pages used for memmap
  78. [    0.000000]   DMA zone: 0 pages reserved
  79. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  80. [    0.000000]   Normal zone: 1736 pages used for memmap
  81. [    0.000000]   Normal zone: 220470 pages, LIFO batch:31
  82. [    0.000000]   HighMem zone: 4376 pages used for memmap
  83. [    0.000000]   HighMem zone: 555738 pages, LIFO batch:31
  84. [    0.000000]   Movable zone: 0 pages used for memmap
  85. [    0.000000] Nvidia board detected. Ignoring ACPI timer override.
  86. [    0.000000] If you got timer trouble try acpi_use_timer_override
  87. [    0.000000] Detected use of extended apic ids on hypertransport bus
  88. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  89. [    0.000000] ACPI: Local APIC address 0xfee00000
  90. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  91. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
  92. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  93. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  94. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  95. [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
  96. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  97. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  98. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  99. [    0.000000] ACPI: IRQ9 used by override.
  100. [    0.000000] ACPI: IRQ14 used by override.
  101. [    0.000000] ACPI: IRQ15 used by override.
  102. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  103. [    0.000000] Using ACPI (MADT) for SMP configuration information
  104. [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
  105. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  106. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  107. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  108. [    0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
  109. [    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
  110. [    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
  111. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 780159
  112. [    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
  113. [    0.000000] Enabling fast FPU save and restore... done.
  114. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  115. [    0.000000] Initializing CPU#0
  116. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  117. [    0.000000] Fast TSC calibration using PIT
  118. [    0.000000] Detected 1808.339 MHz processor.
  119. [    0.004000] spurious 8259A interrupt: IRQ7.
  120. [    0.004000] Console: colour VGA+ 80x25
  121. [    0.004000] console [tty0] enabled
  122. [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  123. [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  124. [    0.004000] allocated 15728000 bytes of page_cgroup
  125. [    0.004000] please try cgroup_disable=memory option if you don't want
  126. [    0.004000] Scanning for low memory corruption every 60 seconds
  127. [    0.004000] Memory: 3088208k/3145664k available (4126k kernel code, 56160k reserved, 2208k data, 532k init, 2240456k highmem)
  128. [    0.004000] virtual kernel memory layout:
  129. [    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
  130. [    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
  131. [    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
  132. [    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
  133. [    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
  134. [    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
  135. [    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
  136. [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  137. [    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  138. [    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.67 BogoMIPS (lpj=7233356)
  139. [    0.004032] Security Framework initialized
  140. [    0.004043] SELinux:  Disabled at boot.
  141. [    0.004069] AppArmor: AppArmor initialized
  142. [    0.004078] Mount-cache hash table entries: 512
  143. [    0.004234] Initializing cgroup subsys ns
  144. [    0.004238] Initializing cgroup subsys cpuacct
  145. [    0.004241] Initializing cgroup subsys memory
  146. [    0.004245] Initializing cgroup subsys freezer
  147. [    0.004260] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  148. [    0.004262] CPU: L2 Cache: 512K (64 bytes/line)
  149. [    0.004267] using C1E aware idle routine
  150. [    0.004279] Checking 'hlt' instruction... OK.
  151. [    0.020578] SMP alternatives: switching to UP code
  152. [    0.146485] ACPI: Core revision 20080926
  153. [    0.149182] ACPI: Checking initramfs for custom DSDT
  154. [    0.469569] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  155. [    0.509261] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
  156. [    0.512002] Brought up 1 CPUs
  157. [    0.512002] Total of 1 processors activated (3616.67 BogoMIPS).
  158. [    0.512002] CPU0 attaching NULL sched-domain.
  159. [    0.512002] net_namespace: 776 bytes
  160. [    0.512002] Booting paravirtualized kernel on bare hardware
  161. [    0.512002] Time:  3:56:54  Date: 10/11/09
  162. [    0.512002] regulator: core version 0.5
  163. [    0.512002] NET: Registered protocol family 16
  164. [    0.512002] EISA bus registered
  165. [    0.512002] ACPI: bus type pci registered
  166. [    0.512002] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  167. [    0.512002] PCI: MCFG area at e0000000 reserved in E820
  168. [    0.512002] PCI: Using MMCONFIG for extended config space
  169. [    0.512002] PCI: Using configuration type 1 for base access
  170. [    0.512002] ACPI: EC: Look up EC in DSDT
  171. [    0.518876] ACPI: Interpreter enabled
  172. [    0.518879] ACPI: (supports S0 S1 S4 S5)
  173. [    0.518899] ACPI: Using IOAPIC for interrupt routing
  174. [    0.527690] ACPI: No dock devices found.
  175. [    0.527701] ACPI: PCI Root Bridge [PCI0] (0000:00)
  176. [    0.527790] HPET not enabled in BIOS. You might try hpet=force boot option
  177. [    0.527805] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc1f]
  178. [    0.527813] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
  179. [    0.527817] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
  180. [    0.527825] pci 0000:00:01.1: PME# supported from D3hot D3cold
  181. [    0.527828] pci 0000:00:01.1: PME# disabled
  182. [    0.527846] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
  183. [    0.527860] pci 0000:00:02.0: supports D1 D2
  184. [    0.527863] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  185. [    0.527866] pci 0000:00:02.0: PME# disabled
  186. [    0.527883] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
  187. [    0.527898] pci 0000:00:02.1: supports D1 D2
  188. [    0.527900] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  189. [    0.527903] pci 0000:00:02.1: PME# disabled
  190. [    0.527923] pci 0000:00:04.0: reg 10 io port: [0xf000-0xf0ff]
  191. [    0.527927] pci 0000:00:04.0: reg 14 io port: [0xec00-0xecff]
  192. [    0.527931] pci 0000:00:04.0: reg 18 32bit mmio: [0xfe02d000-0xfe02dfff]
  193. [    0.527942] pci 0000:00:04.0: supports D1 D2
  194. [    0.527962] pci 0000:00:06.0: reg 20 io port: [0xe800-0xe80f]
  195. [    0.527981] pci 0000:00:07.0: reg 10 io port: [0x9f0-0x9f7]
  196. [    0.527985] pci 0000:00:07.0: reg 14 io port: [0xbf0-0xbf3]
  197. [    0.527989] pci 0000:00:07.0: reg 18 io port: [0x970-0x977]
  198. [    0.527992] pci 0000:00:07.0: reg 1c io port: [0xb70-0xb73]
  199. [    0.527996] pci 0000:00:07.0: reg 20 io port: [0xd400-0xd40f]
  200. [    0.528005] pci 0000:00:07.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
  201. [    0.528023] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7]
  202. [    0.528027] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3]
  203. [    0.528031] pci 0000:00:08.0: reg 18 io port: [0x960-0x967]
  204. [    0.528034] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63]
  205. [    0.528038] pci 0000:00:08.0: reg 20 io port: [0xc000-0xc00f]
  206. [    0.528042] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
  207. [    0.528069] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
  208. [    0.528073] pci 0000:00:0a.0: reg 14 io port: [0xbc00-0xbc07]
  209. [    0.528086] pci 0000:00:0a.0: supports D1 D2
  210. [    0.528088] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
  211. [    0.528091] pci 0000:00:0a.0: PME# disabled
  212. [    0.528112] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
  213. [    0.528115] pci 0000:00:0b.0: PME# disabled
  214. [    0.528136] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  215. [    0.528138] pci 0000:00:0c.0: PME# disabled
  216. [    0.528159] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
  217. [    0.528162] pci 0000:00:0d.0: PME# disabled
  218. [    0.528182] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
  219. [    0.528185] pci 0000:00:0e.0: PME# disabled
  220. [    0.528284] pci 0000:00:09.0: transparent bridge
  221. [    0.528287] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
  222. [    0.528290] pci 0000:00:09.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
  223. [    0.528294] pci 0000:00:09.0: bridge 32bit mmio pref: [0xfdf00000-0xfdffffff]
  224. [    0.528325] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
  225. [    0.528328] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
  226. [    0.528332] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
  227. [    0.528363] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
  228. [    0.528366] pci 0000:00:0c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
  229. [    0.528370] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
  230. [    0.528400] pci 0000:00:0d.0: bridge io port: [0x7000-0x7fff]
  231. [    0.528403] pci 0000:00:0d.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
  232. [    0.528407] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
  233. [    0.528428] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
  234. [    0.528436] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
  235. [    0.528443] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
  236. [    0.528448] pci 0000:05:00.0: reg 24 io port: [0x6c00-0x6c7f]
  237. [    0.528452] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
  238. [    0.528489] pci 0000:00:0e.0: bridge io port: [0x6000-0x6fff]
  239. [    0.528492] pci 0000:00:0e.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
  240. [    0.528496] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
  241. [    0.528506] bus 00 -> node 0
  242. [    0.528514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  243. [    0.528916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  244. [    0.596204] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  245. [    0.596401] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  246. [    0.596599] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 9 10 11 12 14 15)
  247. [    0.596794] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  248. [    0.596989] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  249. [    0.597186] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 9 10 *11 12 14 15)
  250. [    0.597382] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  251. [    0.597579] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 9 *10 11 12 14 15)
  252. [    0.597776] ACPI: PCI Interrupt Link [LACI] (IRQs 5 9 10 *11 12 14 15)
  253. [    0.597971] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  254. [    0.598171] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 9 *10 11 12 14 15)
  255. [    0.598368] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 9 10 11 12 14 15)
  256. [    0.598567] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  257. [    0.598781] ACPI: PCI Interrupt Link [LSID] (IRQs 5 9 *10 11 12 14 15)
  258. [    0.598990] ACPI: PCI Interrupt Link [LFID] (IRQs 5 9 10 *11 12 14 15)
  259. [    0.599196] ACPI: PCI Interrupt Link [LPCA] (IRQs 5 9 10 11 12 14 15) *0, disabled.
  260. [    0.599415] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
  261. [    0.599630] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
  262. [    0.599844] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
  263. [    0.600063] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
  264. [    0.600204] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
  265. [    0.600427] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
  266. [    0.600649] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
  267. [    0.600870] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
  268. [    0.601091] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
  269. [    0.601313] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
  270. [    0.601535] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
  271. [    0.601756] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
  272. [    0.601977] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
  273. [    0.602217] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
  274. [    0.602447] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
  275. [    0.602677] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
  276. [    0.602818] ACPI: WMI: Mapper loaded
  277. [    0.603012] SCSI subsystem initialized
  278. [    0.603053] libata version 3.00 loaded.
  279. [    0.603098] usbcore: registered new interface driver usbfs
  280. [    0.603115] usbcore: registered new interface driver hub
  281. [    0.603140] usbcore: registered new device driver usb
  282. [    0.603247] PCI: Using ACPI for IRQ routing
  283. [    0.603328] Bluetooth: Core ver 2.13
  284. [    0.603328] NET: Registered protocol family 31
  285. [    0.603328] Bluetooth: HCI device and connection manager initialized
  286. [    0.603328] Bluetooth: HCI socket layer initialized
  287. [    0.603328] NET: Registered protocol family 8
  288. [    0.603328] NET: Registered protocol family 20
  289. [    0.603328] NetLabel: Initializing
  290. [    0.603328] NetLabel:  domain hash size = 128
  291. [    0.603328] NetLabel:  protocols = UNLABELED CIPSOv4
  292. [    0.603328] NetLabel:  unlabeled traffic allowed by default
  293. [    0.603328] AppArmor: AppArmor Filesystem Enabled
  294. [    0.603328] pnp: PnP ACPI init
  295. [    0.603328] ACPI: bus type pnp registered
  296. [    0.609570] pnp: PnP ACPI: found 14 devices
  297. [    0.609572] ACPI: ACPI bus type pnp unregistered
  298. [    0.609575] PnPBIOS: Disabled by ACPI PNP
  299. [    0.609584] system 00:01: ioport range 0x1000-0x107f has been reserved
  300. [    0.609587] system 00:01: ioport range 0x1080-0x10ff has been reserved
  301. [    0.609590] system 00:01: ioport range 0x1400-0x147f has been reserved
  302. [    0.609593] system 00:01: ioport range 0x1480-0x14ff has been reserved
  303. [    0.609596] system 00:01: ioport range 0x1800-0x187f has been reserved
  304. [    0.609599] system 00:01: ioport range 0x1880-0x18ff has been reserved
  305. [    0.609605] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
  306. [    0.609607] system 00:02: ioport range 0x800-0x805 has been reserved
  307. [    0.609610] system 00:02: ioport range 0x290-0x30f has been reserved
  308. [    0.609618] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
  309. [    0.609628] system 00:0d: iomem range 0xd1800-0xd3fff has been reserved
  310. [    0.609631] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
  311. [    0.609634] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
  312. [    0.609637] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
  313. [    0.609640] system 00:0d: iomem range 0xbfff0000-0xbfffffff could not be reserved
  314. [    0.609643] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
  315. [    0.609650] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
  316. [    0.609653] system 00:0d: iomem range 0x100000-0xbffeffff could not be reserved
  317. [    0.609656] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
  318. [    0.609659] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
  319. [    0.609662] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
  320. [    0.609665] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
  321. [    0.609668] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
  322. [    0.609671] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
  323. [    0.644365] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
  324. [    0.644368] pci 0000:00:09.0:   IO window: 0xa000-0xafff
  325. [    0.644372] pci 0000:00:09.0:   MEM window: 0xfde00000-0xfdefffff
  326. [    0.644375] pci 0000:00:09.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
  327. [    0.644379] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
  328. [    0.644382] pci 0000:00:0b.0:   IO window: 0x9000-0x9fff
  329. [    0.644385] pci 0000:00:0b.0:   MEM window: 0xfdd00000-0xfddfffff
  330. [    0.644388] pci 0000:00:0b.0:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
  331. [    0.644392] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
  332. [    0.644394] pci 0000:00:0c.0:   IO window: 0x8000-0x8fff
  333. [    0.644398] pci 0000:00:0c.0:   MEM window: 0xfdb00000-0xfdbfffff
  334. [    0.644401] pci 0000:00:0c.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
  335. [    0.644404] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
  336. [    0.644407] pci 0000:00:0d.0:   IO window: 0x7000-0x7fff
  337. [    0.644410] pci 0000:00:0d.0:   MEM window: 0xfd900000-0xfd9fffff
  338. [    0.644413] pci 0000:00:0d.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
  339. [    0.644420] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
  340. [    0.644422] pci 0000:00:0e.0:   IO window: 0x6000-0x6fff
  341. [    0.644425] pci 0000:00:0e.0:   MEM window: 0xfa000000-0xfcffffff
  342. [    0.644428] pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
  343. [    0.644437] pci 0000:00:09.0: setting latency timer to 64
  344. [    0.644443] pci 0000:00:0b.0: setting latency timer to 64
  345. [    0.644447] pci 0000:00:0c.0: setting latency timer to 64
  346. [    0.644451] pci 0000:00:0d.0: setting latency timer to 64
  347. [    0.644456] pci 0000:00:0e.0: setting latency timer to 64
  348. [    0.644460] bus: 00 index 0 io port: [0x00-0xffff]
  349. [    0.644462] bus: 00 index 1 mmio: [0x000000-0xffffffff]
  350. [    0.644464] bus: 01 index 0 io port: [0xa000-0xafff]
  351. [    0.644467] bus: 01 index 1 mmio: [0xfde00000-0xfdefffff]
  352. [    0.644469] bus: 01 index 2 mmio: [0xfdf00000-0xfdffffff]
  353. [    0.644471] bus: 01 index 3 io port: [0x00-0xffff]
  354. [    0.644473] bus: 01 index 4 mmio: [0x000000-0xffffffff]
  355. [    0.644475] bus: 02 index 0 io port: [0x9000-0x9fff]
  356. [    0.644477] bus: 02 index 1 mmio: [0xfdd00000-0xfddfffff]
  357. [    0.644480] bus: 02 index 2 mmio: [0xfdc00000-0xfdcfffff]
  358. [    0.644482] bus: 02 index 3 mmio: [0x0-0x0]
  359. [    0.644484] bus: 03 index 0 io port: [0x8000-0x8fff]
  360. [    0.644486] bus: 03 index 1 mmio: [0xfdb00000-0xfdbfffff]
  361. [    0.644488] bus: 03 index 2 mmio: [0xfda00000-0xfdafffff]
  362. [    0.644490] bus: 03 index 3 mmio: [0x0-0x0]
  363. [    0.644492] bus: 04 index 0 io port: [0x7000-0x7fff]
  364. [    0.644494] bus: 04 index 1 mmio: [0xfd900000-0xfd9fffff]
  365. [    0.644496] bus: 04 index 2 mmio: [0xfd800000-0xfd8fffff]
  366. [    0.644498] bus: 04 index 3 mmio: [0x0-0x0]
  367. [    0.644500] bus: 05 index 0 io port: [0x6000-0x6fff]
  368. [    0.644503] bus: 05 index 1 mmio: [0xfa000000-0xfcffffff]
  369. [    0.644505] bus: 05 index 2 mmio: [0xd0000000-0xdfffffff]
  370. [    0.644507] bus: 05 index 3 mmio: [0x0-0x0]
  371. [    0.644517] NET: Registered protocol family 2
  372. [    0.644548] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  373. [    0.644548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  374. [    0.645202] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  375. [    0.645643] TCP: Hash tables configured (established 131072 bind 65536)
  376. [    0.645646] TCP reno registered
  377. [    0.645665] NET: Registered protocol family 1
  378. [    0.645665] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
  379. [    0.960077]  it is
  380. [    1.304769] Freeing initrd memory: 7566k freed
  381. [    1.304869] cpufreq: No nForce2 chipset.
  382. [    1.305014] audit: initializing netlink socket (disabled)
  383. [    1.305032] type=2000 audit(1255233414.304:1): initialized
  384. [    1.313664] highmem bounce pool size: 64 pages
  385. [    1.313670] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  386. [    1.314868] VFS: Disk quotas dquot_6.5.1
  387. [    1.314923] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  388. [    1.315520] fuse init (API version 7.10)
  389. [    1.315597] msgmni has been set to 1672
  390. [    1.315761] alg: No test for stdrng (krng)
  391. [    1.315771] io scheduler noop registered
  392. [    1.315773] io scheduler anticipatory registered
  393. [    1.315775] io scheduler deadline registered
  394. [    1.315790] io scheduler cfq registered (default)
  395. [    1.315808] pci 0000:00:00.0: Enabling HT MSI Mapping
  396. [    1.315900] pci 0000:00:0b.0: Enabling HT MSI Mapping
  397. [    1.315907] pci 0000:00:0b.0: Found enabled HT MSI Mapping
  398. [    1.315912] pci 0000:00:0b.0: Linking AER extended capability
  399. [    1.315921] pci 0000:00:0c.0: Enabling HT MSI Mapping
  400. [    1.315927] pci 0000:00:0c.0: Found enabled HT MSI Mapping
  401. [    1.315930] pci 0000:00:0c.0: Linking AER extended capability
  402. [    1.315939] pci 0000:00:0d.0: Enabling HT MSI Mapping
  403. [    1.315946] pci 0000:00:0d.0: Found enabled HT MSI Mapping
  404. [    1.315948] pci 0000:00:0d.0: Linking AER extended capability
  405. [    1.315957] pci 0000:00:0e.0: Enabling HT MSI Mapping
  406. [    1.315963] pci 0000:00:0e.0: Found enabled HT MSI Mapping
  407. [    1.315966] pci 0000:00:0e.0: Linking AER extended capability
  408. [    1.315982] pci 0000:05:00.0: Boot video device
  409. [    1.322549] pcieport-driver 0000:00:0b.0: setting latency timer to 64
  410. [    1.322569] pcieport-driver 0000:00:0b.0: found MSI capability
  411. [    1.322585] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
  412. [    1.322591] pci_express 0000:00:0b.0:pcie00: allocate port service
  413. [    1.322605] pci_express 0000:00:0b.0:pcie03: allocate port service
  414. [    1.322637] pcieport-driver 0000:00:0c.0: setting latency timer to 64
  415. [    1.322656] pcieport-driver 0000:00:0c.0: found MSI capability
  416. [    1.322666] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
  417. [    1.322672] pci_express 0000:00:0c.0:pcie00: allocate port service
  418. [    1.322686] pci_express 0000:00:0c.0:pcie03: allocate port service
  419. [    1.322717] pcieport-driver 0000:00:0d.0: setting latency timer to 64
  420. [    1.322736] pcieport-driver 0000:00:0d.0: found MSI capability
  421. [    1.322746] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
  422. [    1.322752] pci_express 0000:00:0d.0:pcie00: allocate port service
  423. [    1.322763] pci_express 0000:00:0d.0:pcie03: allocate port service
  424. [    1.322795] pcieport-driver 0000:00:0e.0: setting latency timer to 64
  425. [    1.322814] pcieport-driver 0000:00:0e.0: found MSI capability
  426. [    1.322823] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
  427. [    1.322829] pci_express 0000:00:0e.0:pcie00: allocate port service
  428. [    1.322841] pci_express 0000:00:0e.0:pcie03: allocate port service
  429. [    1.322884] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  430. [    1.322893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  431. [    1.323037] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  432. [    1.323040] ACPI: Power Button (FF) [PWRF]
  433. [    1.323081] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  434. [    1.323084] ACPI: Power Button (CM) [PWRB]
  435. [    1.323134] fan PNP0C0B:00: registered as cooling_device0
  436. [    1.323139] ACPI: Fan [FAN] (on)
  437. [    1.323670] processor ACPI_CPU:00: registered as cooling_device1
  438. [    1.327950] thermal LNXTHERM:01: registered as thermal_zone0
  439. [    1.328320] ACPI: Thermal Zone [THRM] (40 C)
  440. [    1.328366] isapnp: Scanning for PnP cards...
  441. [    1.680815] isapnp: No Plug & Play device found
  442. [    1.682157] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
  443. [    1.682264] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  444. [    1.682517] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  445. [    1.683275] brd: module loaded
  446. [    1.683587] loop: module loaded
  447. [    1.683652] Fixed MDIO Bus: probed
  448. [    1.683658] PPP generic driver version 2.4.2
  449. [    1.683732] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  450. [    1.683758] Driver 'sd' needs updating - please use bus_type methods
  451. [    1.683767] Driver 'sr' needs updating - please use bus_type methods
  452. [    1.683939] sata_nv 0000:00:07.0: version 3.5
  453. [    1.684453] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
  454. [    1.684465] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
  455. [    1.684535] sata_nv 0000:00:07.0: setting latency timer to 64
  456. [    1.684632] scsi0 : sata_nv
  457. [    1.684732] scsi1 : sata_nv
  458. [    1.684907] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 23
  459. [    1.684910] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 23
  460. [    2.564029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  461. [    2.608254] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
  462. [    2.608257] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  463. [    2.674910] ata1.00: configured for UDMA/133
  464. [    3.664026] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  465. [    4.143369] ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
  466. [    4.143372] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  467. [    4.156315] ata2.00: configured for UDMA/133
  468. [    4.156437] scsi 0:0:0:0: Direct-Access     ATA      ST3160811AS      3.AA PQ: 0 ANSI: 5
  469. [    4.156534] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
  470. [    4.156551] sd 0:0:0:0: [sda] Write Protect is off
  471. [    4.156554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  472. [    4.156577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  473. [    4.156644] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
  474. [    4.156657] sd 0:0:0:0: [sda] Write Protect is off
  475. [    4.156660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  476. [    4.156681] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  477. [    4.156686]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
  478. [    4.254466] sd 0:0:0:0: [sda] Attached SCSI disk
  479. [    4.254515] sd 0:0:0:0: Attached scsi generic sg0 type 0
  480. [    4.254582] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
  481. [    4.254656] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
  482. [    4.254670] sd 1:0:0:0: [sdb] Write Protect is off
  483. [    4.254672] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  484. [    4.254694] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  485. [    4.254740] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
  486. [    4.254753] sd 1:0:0:0: [sdb] Write Protect is off
  487. [    4.254755] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  488. [    4.254777] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  489. [    4.254781]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
  490. [    4.299365] sd 1:0:0:0: [sdb] Attached SCSI disk
  491. [    4.299399] sd 1:0:0:0: Attached scsi generic sg1 type 0
  492. [    4.299876] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
  493. [    4.299885] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
  494. [    4.299938] sata_nv 0000:00:08.0: setting latency timer to 64
  495. [    4.300024] scsi2 : sata_nv
  496. [    4.300076] scsi3 : sata_nv
  497. [    4.300243] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 22
  498. [    4.300246] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 22
  499. [    5.180028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  500. [    5.203119] ata3.00: ATA-8: WDC WD3200AAJS-00B4A0, 01.03A01, max UDMA/133
  501. [    5.203122] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
  502. [    5.216285] ata3.00: configured for UDMA/133
  503. [    5.940022] ata4: SATA link down (SStatus 0 SControl 300)
  504. [    5.940101] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
  505. [    5.940180] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
  506. [    5.940194] sd 2:0:0:0: [sdc] Write Protect is off
  507. [    5.940197] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  508. [    5.940220] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  509. [    5.940274] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
  510. [    5.940287] sd 2:0:0:0: [sdc] Write Protect is off
  511. [    5.940290] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  512. [    5.940311] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  513. [    5.940315]  sdc: sdc1 sdc2 sdc3 < sdc5 >
  514. [    5.965678] sd 2:0:0:0: [sdc] Attached SCSI disk
  515. [    5.965721] sd 2:0:0:0: Attached scsi generic sg2 type 0
  516. [    5.965806] pata_amd 0000:00:06.0: version 0.3.10
  517. [    5.965849] pata_amd 0000:00:06.0: setting latency timer to 64
  518. [    5.965918] scsi4 : pata_amd
  519. [    5.965971] scsi5 : pata_amd
  520. [    5.966749] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
  521. [    5.966752] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
  522. [    6.128254] ata5.00: ATAPI: ASUS    DVD-E616A2, 1.03, max UDMA/100
  523. [    6.128278] ata5: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:600:0x13)
  524. [    6.144206] ata5.00: configured for UDMA/100
  525. [    6.311257] scsi 4:0:0:0: CD-ROM            ASUS     DVD-E616A2       1.03 PQ: 0 ANSI: 5
  526. [    6.311881] sr0: scsi3-mmc drive: 24x/48x cd/rw xa/form2 cdda tray
  527. [    6.311885] Uniform CD-ROM driver Revision: 3.20
  528. [    6.311992] sr 4:0:0:0: Attached scsi CD-ROM sr0
  529. [    6.312043] sr 4:0:0:0: Attached scsi generic sg3 type 5
  530. [    6.312511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  531. [    6.312869] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
  532. [    6.312879] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
  533. [    6.312902] ehci_hcd 0000:00:02.1: setting latency timer to 64
  534. [    6.312905] ehci_hcd 0000:00:02.1: EHCI Host Controller
  535. [    6.312964] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  536. [    6.312998] ehci_hcd 0000:00:02.1: debug port 1
  537. [    6.313002] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
  538. [    6.313020] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
  539. [    6.324023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
  540. [    6.324093] usb usb1: configuration #1 chosen from 1 choice
  541. [    6.324121] hub 1-0:1.0: USB hub found
  542. [    6.324131] hub 1-0:1.0: 10 ports detected
  543. [    6.324236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  544. [    6.324569] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
  545. [    6.324575] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
  546. [    6.324585] ohci_hcd 0000:00:02.0: setting latency timer to 64
  547. [    6.324588] ohci_hcd 0000:00:02.0: OHCI Host Controller
  548. [    6.324630] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
  549. [    6.324649] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
  550. [    6.382052] usb usb2: configuration #1 chosen from 1 choice
  551. [    6.382078] hub 2-0:1.0: USB hub found
  552. [    6.382086] hub 2-0:1.0: 10 ports detected
  553. [    6.382170] uhci_hcd: USB Universal Host Controller Interface driver
  554. [    6.382225] usbcore: registered new interface driver libusual
  555. [    6.382255] usbcore: registered new interface driver usbserial
  556. [    6.382269] USB Serial support registered for generic
  557. [    6.382281] usbcore: registered new interface driver usbserial_generic
  558. [    6.382283] usbserial: USB Serial Driver core
  559. [    6.382328] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  560. [    6.384612] serio: i8042 KBD port at 0x60,0x64 irq 1
  561. [    6.384617] serio: i8042 AUX port at 0x60,0x64 irq 12
  562. [    6.384733] mice: PS/2 mouse device common for all mice
  563. [    6.384887] rtc_cmos 00:04: RTC can wake from S4
  564. [    6.384919] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  565. [    6.384941] rtc0: alarms up to one year, y3k, 242 bytes nvram
  566. [    6.385003] device-mapper: uevent: version 1.0.3
  567. [    6.385115] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
  568. [    6.385164] device-mapper: multipath: version 1.0.5 loaded
  569. [    6.385167] device-mapper: multipath round-robin: version 1.0.0 loaded
  570. [    6.385238] EISA: Probing bus 0 at eisa.0
  571. [    6.385245] Cannot allocate resource for EISA slot 1
  572. [    6.385257] Cannot allocate resource for EISA slot 6
  573. [    6.385259] Cannot allocate resource for EISA slot 7
  574. [    6.385261] Cannot allocate resource for EISA slot 8
  575. [    6.385262] EISA: Detected 0 cards.
  576. [    6.385291] cpuidle: using governor ladder
  577. [    6.385293] cpuidle: using governor menu
  578. [    6.385797] TCP cubic registered
  579. [    6.385891] NET: Registered protocol family 10
  580. [    6.386287] lo: Disabled Privacy Extensions
  581. [    6.386594] NET: Registered protocol family 17
  582. [    6.386610] Bluetooth: L2CAP ver 2.11
  583. [    6.386611] Bluetooth: L2CAP socket layer initialized
  584. [    6.386614] Bluetooth: SCO (Voice Link) ver 0.6
  585. [    6.386616] Bluetooth: SCO socket layer initialized
  586. [    6.386641] Bluetooth: RFCOMM socket layer initialized
  587. [    6.386648] Bluetooth: RFCOMM TTY layer initialized
  588. [    6.386650] Bluetooth: RFCOMM ver 1.10
  589. [    6.386674] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
  590. [    6.386719] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
  591. [    6.386722] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
  592. [    6.386763] Using IPI No-Shortcut mode
  593. [    6.386831] registered taskstats version 1
  594. [    6.386952]   Magic number: 13:57:917
  595. [    6.387070] rtc_cmos 00:04: setting system clock to 2009-10-11 03:56:59 UTC (1255233419)
  596. [    6.387074] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  597. [    6.387076] EDD information not available.
  598. [    6.387484] Freeing unused kernel memory: 532k freed
  599. [    6.387620] Write protecting the kernel text: 4128k
  600. [    6.387666] Write protecting the kernel read-only data: 1532k
  601. [    6.417122] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  602. [    6.816868] Floppy drive(s): fd0 is 1.44M
  603. [    6.835910] FDC 0 is a post-1991 82077
  604. [    6.995959] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
  605. [    6.996406] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
  606. [    6.996412] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
  607. [    6.996418] forcedeth 0000:00:0a.0: setting latency timer to 64
  608. [    6.996543] nv_probe: set workaround bit for reversed mac addr
  609. [    7.516968] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 9, addr 00:30:18:a5:bd:ba
  610. [    7.516973] forcedeth 0000:00:0a.0: highdma csum timirq lnktim desc-v3
  611. [    8.146962] EXT4-fs: INFO: recovery required on readonly filesystem.
  612. [    8.146967] EXT4-fs: write access will be enabled during recovery.
  613. [    8.160537] EXT4-fs: barriers enabled
  614. [    8.179574] kjournald2 starting.  Commit interval 5 seconds
  615. [    8.179584] EXT4-fs: delayed allocation enabled
  616. [    8.179585] EXT4-fs: file extents enabled
  617. [    8.185783] EXT4-fs: mballoc enabled
  618. [    8.185785] EXT4-fs: recovery complete.
  619. [    8.193095] EXT4-fs: mounted filesystem with ordered data mode.
  620. [    8.210749] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  621. [    8.210753] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  622. [    8.210755] EXT4-fs: mballoc: 0 generated and it took 0
  623. [    8.210757] EXT4-fs: mballoc: 0 preallocated, 0 discarded
  624. [    8.259463] EXT4-fs: INFO: recovery required on readonly filesystem.
  625. [    8.259467] EXT4-fs: write access will be enabled during recovery.
  626. [    8.287352] EXT4-fs: barriers enabled
  627. [    8.300973] kjournald2 starting.  Commit interval 5 seconds
  628. [    8.300983] EXT4-fs: delayed allocation enabled
  629. [    8.300985] EXT4-fs: file extents enabled
  630. [    8.307168] EXT4-fs: mballoc enabled
  631. [    8.307170] EXT4-fs: recovery complete.
  632. [    8.314495] EXT4-fs: mounted filesystem with ordered data mode.
  633. [    8.327679] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  634. [    8.327683] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  635. [    8.327685] EXT4-fs: mballoc: 0 generated and it took 0
  636. [    8.327687] EXT4-fs: mballoc: 0 preallocated, 0 discarded
  637. [    8.398512] EXT4-fs: INFO: recovery required on readonly filesystem.
  638. [    8.398516] EXT4-fs: write access will be enabled during recovery.
  639. [    8.409751] EXT4-fs: barriers enabled
  640. [    8.424220] kjournald2 starting.  Commit interval 5 seconds
  641. [    8.424230] EXT4-fs: delayed allocation enabled
  642. [    8.424231] EXT4-fs: file extents enabled
  643. [    8.430278] EXT4-fs: mballoc enabled
  644. [    8.430280] EXT4-fs: recovery complete.
  645. [    8.430515] EXT4-fs: mounted filesystem with ordered data mode.
  646. [    8.458262] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  647. [    8.458266] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  648. [    8.458268] EXT4-fs: mballoc: 0 generated and it took 0
  649. [    8.458270] EXT4-fs: mballoc: 0 preallocated, 0 discarded
  650. [    8.495352] kjournald starting.  Commit interval 5 seconds
  651. [    8.495364] EXT3-fs: mounted filesystem with ordered data mode.
  652. [    8.526812] EXT3-fs: INFO: recovery required on readonly filesystem.
  653. [    8.526816] EXT3-fs: write access will be enabled during recovery.
  654. [    8.551658] kjournald starting.  Commit interval 5 seconds
  655. [    8.551666] EXT3-fs: recovery complete.
  656. [    8.551893] EXT3-fs: mounted filesystem with ordered data mode.
  657. [   11.724636] ISO 9660 Extensions: Microsoft Joliet Level 3
  658. [   11.804404] ISO 9660 Extensions: RRIP_1991A
  659. [   12.126317] aufs 20080922
  660. [   12.347904] squashfs: version 3.3 (2007/10/31) Phillip Lougher
  661. [   78.538626] udev: starting version 141
  662. [   78.717868] parport_pc 00:09: reported by Plug and Play ACPI
  663. [   78.717909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  664. [   78.897127] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
  665. [   78.897172] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
  666. [   80.401004] ppdev: user-space parallel port driver
  667. [   80.445522] input: PC Speaker as /devices/platform/pcspkr/input/input4
  668. [   80.588032] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
  669. [   80.742943] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
  670. [   80.742950] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
  671. [   80.743122] Intel ICH 0000:00:04.0: setting latency timer to 64
  672. [   81.040441] psmouse serio1: ID: 10 00 64<6>intel8x0_measure_ac97_clock: measured 54558 usecs
  673. [   81.064024] intel8x0: clocking to 46903
  674. [   81.536379] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
  675. [   83.972003] Adding 5863684k swap on /dev/sda10.  Priority:-1 extents:1 across:5863684k
  676. [   92.032195] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  677. [   92.032199] Bluetooth: BNEP filters: protocol multicast
  678. [   92.179901] Bridge firewalling registered
  679. [   98.971480] lp0: using parport0 (interrupt-driven).
  680. [  100.889329] eth0: no link during initialization.
  681. [  100.889796] ADDRCONF(NETDEV_UP): eth0: link is not ready
  682. [  194.144030] Clocksource tsc unstable (delta = -88874156 ns)
  683. [  278.861987] EXT4-fs: barriers enabled
  684. [  278.877707] kjournald2 starting.  Commit interval 5 seconds
  685. [  278.878062] EXT4 FS on sda5, internal journal on sda5:8
  686. [  278.878067] EXT4-fs: delayed allocation enabled
  687. [  278.878070] EXT4-fs: file extents enabled
  688. [  278.890540] EXT4-fs: mballoc enabled
  689. [  278.890550] EXT4-fs: mounted filesystem with ordered data mode.
  690. [   98.971480] lp0: using parport0 (interrupt-driven).
  691. [  100.889329] eth0: no link during initialization.
  692. [  100.889796] ADDRCONF(NETDEV_UP): eth0: link is not ready
  693. [  194.144030] Clocksource tsc unstable (delta = -88874156 ns)
  694. [  278.861987] EXT4-fs: barriers enabled
  695. [  278.877707] kjournald2 starting.  Commit interval 5 seconds
  696. [  278.878062] EXT4 FS on sda5, internal journal on sda5:8
  697. [  278.878067] EXT4-fs: delayed allocation enabled
  698. [  278.878070] EXT4-fs: file extents enabled
  699. [  278.890540] EXT4-fs: mballoc enabled
  700. [  278.890550] EXT4-fs: mounted filesystem with ordered data mode.
  701. [  282.680687] kjournald starting.  Commit interval 5 seconds
  702. [  282.680858] EXT3 FS on sda9, internal journal
  703. [  282.680868] EXT3-fs: mounted filesystem with ordered data mode.
  704. [  300.189382] EXT4-fs: barriers enabled
  705. [  300.209670] kjournald2 starting.  Commit interval 5 seconds
  706. [  300.209872] EXT4 FS on sda6, internal journal on sda6:8
  707. [  300.209875] EXT4-fs: delayed allocation enabled
  708. [  300.209877] EXT4-fs: file extents enabled
  709. [  300.216122] EXT4-fs: mballoc enabled
  710. [  300.216127] EXT4-fs: mounted filesystem with ordered data mode.
  711. [  302.348381] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
  712. [  302.348398] ReiserFS: sda1: using ordered data mode
  713. [  302.353373] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  714. [  302.354000] ReiserFS: sda1: checking transaction log (sda1)
  715. [  302.364550] ReiserFS: sda1: replayed 9 transactions in 0 seconds
  716. [  302.406094] ReiserFS: sda1: Using r5 hash to sort names
  717. [  303.852201] EXT4-fs: barriers enabled
  718. [  303.863011] kjournald2 starting.  Commit interval 5 seconds
  719. [  303.863192] EXT4 FS on sda7, internal journal on sda7:8
  720. [  303.863196] EXT4-fs: delayed allocation enabled
  721. [  303.863199] EXT4-fs: file extents enabled
  722. [  303.874129] EXT4-fs: mballoc enabled
  723. [  303.874137] EXT4-fs: mounted filesystem with ordered data mode.
  724. [  306.528515] kjournald starting.  Commit interval 5 seconds
  725. [  306.528672] EXT3 FS on sda8, internal journal
  726. [  306.528682] EXT3-fs: mounted filesystem with ordered data mode.
  727. [  733.467506] eth0: link up.
  728. [  733.467914] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  729. [  744.032022] eth0: no IPv6 routers present
  730. [ 2059.285534] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  731. [ 2059.285544] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  732. [ 2059.285549] EXT4-fs: mballoc: 0 generated and it took 0
  733. [ 2059.285553] EXT4-fs: mballoc: 0 preallocated, 0 discarded
  734. [ 2061.647805] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  735. [ 2061.647813] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  736. [ 2061.647818] EXT4-fs: mballoc: 0 generated and it took 0
  737. [ 2061.647821] EXT4-fs: mballoc: 0 preallocated, 0 discarded
  738. [ 2063.448848] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
  739. [ 2063.448857] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
  740. [ 2063.448862] EXT4-fs: mballoc: 0 generated and it took 0
  741. [ 2063.448866] EXT4-fs: mballoc: 0 preallocated, 0 discarded
复制代码
回复

使用道具 举报

ywwow
 楼主| 发表于 2009-10-10 21:29:20 | 显示全部楼层
P.S.  I also tried "cfdisk", but neither "cfdisk" nor "cfdisk /dev/sda" worked. "Fatal error:can not open disk drive", it was said.
回复 支持 反对

使用道具 举报

发表于 2009-10-10 22:39:51 | 显示全部楼层
內核檢測出三塊硬盤：
希捷ST3160811AS（160 GB）
西數WDC WD10EADS-00L（1.00 TB）
西數WDC WD3200AAJS-0（320 GB）

這個信息正確嗎？你先試試其它硬盤。
回复 支持 反对

使用道具 举报

ywwow
 楼主| 发表于 2009-10-10 22:50:33 | 显示全部楼层
Post by coderoar;2035151
內核檢測出三塊硬盤：
希捷ST3160811AS（160 GB）
西數WDC WD10EADS-00L（1.00 TB）
西數WDC WD3200AAJS-0（320 GB）

這個信息正確嗎？你先試試其它硬盤。


Yes that's right.

Now the problem is solved. I find I am so stupid that I have forgotten to type "sudo" when I was in a ubuntu liveCD!
回复 支持 反对

使用道具 举报

meteo
发表于 2009-10-11 10:01:20 | 显示全部楼层
:yun:

ubuntu不被很多人待见还是有原因啊
回复 支持 反对

使用道具 举报

发表于 2009-10-11 10:29:21 | 显示全部楼层
LiveCD的默認帳號好像都不是root權限的，但是su和sudo兩者起碼有一個能用。這是因為很多都是有SSH這樣的服務，所以要為安全考慮。

Ubuntu挺好的，Google採用它自有道理。
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表