好不容易运行mpd没有出错，结果mpc又没有反应

yufeimen

之前说bind to 6600出错，把配置文件里面的bind to address 改了，然后没有出错还可以同时运行很多个mpd在后台

问题是 mpc的所有命令用了完全没有反应…………就看到光标在闪……是不是让我选择moc呢

adam8157

moc 是方便的多。。。

你的mpd建数据库了？mpd  --create-db

yufeimen

# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.

# Required files and directories ##############################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database.
#
music_directory /home/feiyan/music
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format.
#
playlist_directory /home/feiyan/.mpd/playlists
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up.
#
db_file /home/feiyan/.mpd/mpd.db
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
log_file /home/feiyan/.mpd/mpd.log
error_file /home/feiyan/.mpd/mpd.error
###############################################################################


# Optional files ##############################################################
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default.
#
pid_file /home/feiyan/.mpd/mpd.pid
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default.
#
state_file /home/feiyan/.mpd/mpdstate
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as, if set. MPD should
# never run as root and you may use this setting to make MPD change its user
# id after initialization. Do not use this setting if you start MPD as an
# unprivileged user. This setting is disabled by default, and the server will
# run as root.
#
#user "feiyan"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
#bind_to_address                "127.0.0.1"
#
# And for Unix Socket
#bind_to_address                "localhost"
#
# This setting is the port that is desired for the daemon to get assigned to.
#
#port                                "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level                        "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
gapless_mp3_playback                        "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists        "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################

# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured #music_directory "path_to_your_music_collection"
#
#follow_outside_symlinks        "yes"
#
# If this setting is set to "yes, MPD will discover audio files by following
# symbolic links inside of the configured #music_directory "path_to_your_music_collection"
#
#follow_inside_symlinks                "yes"
#
###############################################################################

# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled                "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name                        "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
#
# An example of an ALSA output:
#
audio_output {
        type                        "alsa"
        name                        "My ALSA Device"
        device                        "default"        # optional
        format                        "44100:16:2"        # optional
}
#
# An example of an OSS output:
#
#audio_output {
#        type                        "oss"
#        name                        "My OSS Device"
#        device                        "/dev/dsp"        # optional
#        format                        "44100:16:2"        # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#        type                        "shout"
#        encoding                "ogg"                        # optional
#        name                        "My Shout Stream"
#        host                        "localhost"
#        port                        "8000"
#        mount                        "/mpd.ogg"
#        password                "hackme"
#        quality                        "5.0"
#        bitrate                        "128"
#        format                        "44100:16:1"
#        protocol                "icecast2"                # optional
#        user                        "source"                # optional
#        description                "My Stream Description"        # optional
#        genre                        "jazz"                        # optional
#        public                        "no"                        # optional
#        timeout                        "2"                        # optional
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#        type                        "pulse"
#        name                        "My Pulse Output"
#        server                        "remote_server"
#        sink                        "remote_server_sink"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#        type                        "null"
#        name                        "My Null Output"
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format                "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use.  Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter                "Fastest Sinc Interpolator"
#
###############################################################################


# Volume control mixer ########################################################
#
# MPD has limited volume controls, to use them pick one below. If one is not
# specified it may be autodetected at startup, depending on the dependencies
# which were compiled into the server.
#
# An example for controlling an ALSA mixer:
#
#mixer_type                        "alsa"
#mixer_device                        "default"
#mixer_control                        "CM"
#
# An example for controlling an OSS mixer:
#
#mixer_type                        "oss"
#mixer_device                        "/dev/mixer"
#mixer_control                        "CM"
#
# This example is a general volume control mixer, it is used to adjust the
# volume of the audio sent to the audio output, and will work with all outputs.
#
#mixer_type                        "software"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. By default this setting is disabled.
#
#replaygain                        "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp                "0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness".
#
#volume_normalization                "no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size                "2048"
#
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#
#buffer_before_play                "10%"
#
###############################################################################


# HTTP Streaming Proxy ########################################################
#
# This setting specifies the HTTP proxy to use for playing HTTP streams. By
# default, these settings will be disabled.
#
#http_proxy_host                "proxy.isp.com"
#http_proxy_port                "8080"
#http_proxy_user                "user"
#http_proxy_password                "password"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout                "60"
#max_connections                "10"
#max_playlist_length                "16384"
#max_command_list_size                "2048"
#max_output_buffer_size                "8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#
filesystem_charset                "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
id3v1_encoding                        "GBK"
#
###############################################################################



运行mpc play 什么字都没有

adam8157

mpd --create-db
运行一遍先

yufeimen

运行了，显示一堆歌曲被added
还是的。mpc没有反应，没有声音没有显示

沙漠之子

你有装archinit吗?

adam8157

哦,我知道了,你这样来,绝对好

系统服务里的mpd去掉,开机运行后mpd --create-db,然后mpd运行,然后就ok.....