求助...我安装完UBUNTU后，盘符全乱了.......

xiaojiaqiao

我是新手，这是第一次安装LINUX，意料之中，还是出事了......
在用硬盘安装时，到挂接硬盘的那一步中，它默认是把CDE盘都挂接上，我以为会弄到CDE盘上的东西,因为我想安装双系统的.所以设置不使用这3个分区...只设置使用F盘和之前分好的用来安装LUNIX的分区,安装完后ubuntu能进入,GRUP也没问题,但XP入不了,我进入DOS打开 GHOST,竟然发现了,原来的C盘变成了没有盘符的一个盘,   原来的D盘变成了C盘,   E盘变成D盘,   E盘变成了F盘   ,F盘却不见了...但在ubuntu中能显示F盘....所以我想问,怎样才能把盘符弄回正常啊?

roamingo

在Linux下把下面命令的输出贴上来看看：
硬盘分区表：
$ sudo fdisk -l /dev/hda (或者 sudo fdisk -l /dev/sda)
Grub引导菜单：
$ cat /boot/grub/menu.lst

xiaojiaqiao

硬盘分区表
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        2432    19535008+  1c  Hidden W95 FAT32 (LBA)
/dev/sda2            2433       18870   132038235    f  W95 Ext'd (LBA)
/dev/sda3           18871       19393     4200997+  83  Linux
/dev/sda4           19394       19457      514080   82  Linux swap / Solaris
/dev/sda5            2433        7296    39070048+   b  W95 FAT32
/dev/sda6            7297       12160    39070048+   b  W95 FAT32
/dev/sda7           12161       18232    48773308+   b  W95 FAT32
/dev/sda8           18233       18870     5124703+  83  Linux



GRUB引导菜单
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default         0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout         10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title         Windows 95/98/NT/2000
# root          (hd0,0)
# makeactive
# chainloader   +1
#
# title         Linux
# root          (hd0,1)
# kernel        /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda3 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,2)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery mode) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title           Ubuntu, kernel 2.6.15-23-386
root            (hd0,2)
kernel          /boot/vmlinuz-2.6.15-23-386 root=/dev/sda3 ro quiet splash
initrd          /boot/initrd.img-2.6.15-23-386
savedefault
boot

title           Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root            (hd0,2)
kernel          /boot/vmlinuz-2.6.15-23-386 root=/dev/sda3 ro single
initrd          /boot/initrd.img-2.6.15-23-386
boot

title           Ubuntu, memtest86+
root            (hd0,2)
kernel          /boot/memtest86+.bin
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title           Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title           Microsoft Windows XP Professional
root            (hd0,0)
savedefault
makeactive
chainloader     +1

xiaojiaqiao

有没有人救救我阿？？？