sataII 硬盘无法安装linux，请问大虾们怎样可以解决这个问题，谢谢

bluceyee

sataII 硬盘无法安装linux，请问大虾们怎样可以解决这个问题，谢谢

MatthewGong

我的希捷的SATA硬盘装的好好的嘛。

Aug  2 10:00:56 mu01 kernel: ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 169
Aug  2 10:00:56 mu01 kernel: ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 169
Aug  2 10:00:56 mu01 kernel: ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
Aug  2 10:00:56 mu01 kernel: ata1: dev 0 configured for UDMA/133
Aug  2 10:00:56 mu01 kernel: scsi0 : ata_piix
Aug  2 10:00:56 mu01 kernel: ata2: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
Aug  2 10:00:56 mu01 kernel: ata2: dev 0 configured for UDMA/133
Aug  2 10:00:56 mu01 kernel: scsi1 : ata_piix
Aug  2 10:00:56 mu01 kernel:   Vendor: ATA       Model: ST3120026AS       Rev: 3.05
Aug  2 10:00:56 mu01 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Aug  2 10:00:56 mu01 kernel: SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Aug  2 10:00:56 mu01 kernel: sda: Write Protect is off
Aug  2 10:00:56 mu01 kernel: SCSI device sda: drive cache: write back
Aug  2 10:00:56 mu01 kernel: SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
Aug  2 10:00:56 mu01 kernel: sda: Write Protect is off
Aug  2 10:00:56 mu01 kernel: SCSI device sda: drive cache: write back
Aug  2 10:00:56 mu01 kernel:  sda: sda1 sda2 sda3 sda4 < sda5 >
Aug  2 10:00:56 mu01 kernel: sd 0:0:0:0: Attached scsi disk sda
Aug  2 10:00:56 mu01 kernel:   Vendor: ATA       Model: ST3120026AS       Rev: 3.05
Aug  2 10:00:56 mu01 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Aug  2 10:00:56 mu01 kernel: SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
Aug  2 10:00:56 mu01 kernel: sdb: Write Protect is off
Aug  2 10:00:56 mu01 kernel: SCSI device sdb: drive cache: write back
Aug  2 10:00:56 mu01 kernel: SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
Aug  2 10:00:56 mu01 kernel: sdb: Write Protect is off
Aug  2 10:00:56 mu01 kernel: SCSI device sdb: drive cache: write back
Aug  2 10:00:56 mu01 kernel:  sdb: sdb1 sdb2 sdb4 < sdb5 >
Aug  2 10:00:56 mu01 kernel: sd 1:0:0:0: Attached scsi disk sdb

jxwoy

我也遇到这样的问题,在vmware和真机上都遇到了~还在研究啊~
可能是kernel不支持的关系
这篇帖子可以参考下http://www.linuxsir.cn/bbs/thread252191.html

pingz

发行版，版本号，安装过程，出错提示。 thx.