关于ADSL求助，俺是菜鸟，希望老鸟能照顾一下

我就横着走

我才学LINUX请问，我是用  ADSL  上网的，用什么软件进行拨号啊，？KPPP？我不回配置，希望老鸟能指点一二，小弟谢谢了！ :%  :confused:

aaccdd

如果没记错,kppp是配置小猫的。
adsl上网的配置，如果是redhat/fecora，可以使用系统工具--网络设备控制，
添加xDsl设备；或使用adsl-setup设置。
具体方法可以参考redhat版快的置顶贴相关版本的配置方法。

如果是debian,请参考下贴的网络配置部分：
http://www.linuxsir.cn/bbs/showthread.php?t=98610

Qlin

1.首先确定内核支持ppp.如下:

Network device support --->
<*> PPP (point-to-point protocol) support
<*> PPP support for async serial ports
<*> PPP support for sync tty ports

2.安装rp-pppoe.

3.然后再来设置ADSL。这一处，我们要用命令。

#adsl-setup


Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):上网用的网卡接口. 默认eth0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):是按需拨号还是持续拨号.按需是填写空闲时间如60(秒).默认的是持续拨号.

DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:域名解析服务器.可填server自动寻找.也可直接填地址.

PASSWORD

>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):防火墙设置. 0-无防火墙 1-基本工作站. 2-局域网网关.

** Summary of what you entered **

Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)? 确认保存退出.

连接adsl使用命令:adsl-start

断开adsl使用命令:adsl-stop

可能遇到一种情况是.adsl拨号上网后.打不开网站.也PING不通.确认前面步骤没错的情况下.拨号连上后使用命令: route add default ppp0

我就横着走

不会吧。。。。俺可是新手，你们说的这些，我看不懂。。。。

Qlin

你用的什么系统..?

我就横着走

rh9。请问有什么入门教程吗？

ogog

redhat9就按Qlinr就行了：

已自带软件了

打开终端:

adsl-setup

一行行对着来。

我就横着走

恩，知道了，谢谢！！

我就横着走

先谢谢回帖的各位，我照着上面的方法去做了，但是还是不能上网，请问是什么原因？我按照上面的方法去做了，运行了之后，ADSL猫的数据传输灯，亮了两下，之后就没反应了！

Qlin

终端里.拨号后有什么提示.?