再请问一个奇怪的问题,关于笔记本的x windows

lockpc

我的笔记本的配置是
cpu : VIA 1G
VGA: SIS 630
RAM: 256MB 共享16MB给显卡
LCD: 不知道

安装时,LCD选LAPTOP 1024X768,16色真彩
在进行测试时,会现花一下屏,然后显示正常.

在正式进入系统后,进入X WINDOWS后,屏幕变白屏了
然后,用CTRL+ALT+F1切虚拟控制台也没用,也是白屏
但是,用CTRL+ALT+F6却切出正常的X WINDOWS



这是怎么回事?

lockpc

另外,?乃郀顟B喚醒也會白屏

dkking

花屏的时候按一下屏幕的开关

3331

和我的移动pc差不多啊，

我的xorg.conf

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
#        FontPath     "unix/:7100"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
#        FontPath     "/home/OOofonts/"
#        FontPath     "/home/ROfonts/"
#        FontPath     "/home/truetype/"
# FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
EndSection

Section "Module"

# Load  "type1"
# Load  "dbe"
# Load  "extmod"
# Load  "fbdevhw"
# Load  "glx"
# Load  "record"
# Load  "freetype"
# Load  "xtt"
Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds"  "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver      "keyboard"
Option     "XkbRules" "xfree86"
Option     "XkbModel" "pc105"
Option     "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "rotocol" "S/2"
Option     "Device" "/dev/psaux"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver      "mouse"
Option     "rotocol" "IMPS/2"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Monitor Vendor"
ModelName    "Generic High Frequency SVGA, 1024x768 @ 70 Hz"
HorizSync    31.5 - 57.0
VertRefresh  50.0 - 70.0
Option     "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver      "sis"
VendorName  "Videocard vendor"
BoardName   "SiS 3D PRO AGP"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Videocard0"
Monitor    "Monitor0"
DefaultDepth     16
SubSection "Display"
  Depth     16
  Modes    "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group        0
Mode         0666
EndSection